Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Rendon, TX
If your driveway gate won’t open, sags on its hinges, or groans against a post that’s drifted out of plumb, you need a crew that understands Rendon soil the way you know your own driveway. Gate repair in Rendon usually runs between $180 and $340 for common fixes like hinge replacement or opener troubleshooting, and we can often have a technician to your property the same day you call. Reach us at (469) 564-8046 and you’ll get a live person, not a voicemail, 24 hours a day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Rendon Homeowners Choose Ironworks Gate Co.
Most Rendon properties sit on Blackland Prairie clay, and clay does not sit still. It swells after spring rains, bakes and shrinks through the summers, and slowly twists gate posts out of alignment. We’ve worked on gates along Rendon Road, on acreage off Wildcat Road, and throughout the long-driveway neighborhoods east of Newt Patterson Road. Homeowners in these areas deal with the same quiet problem every few years: a gate that worked perfectly for a decade suddenly won’t latch, won’t close all the way, or binds against itself halfway through its arc. That’s structural movement, not a broken motor, and it’s the first thing we check. Our background-checked, uniformed technicians arrive in a marked truck, inspect the post and footing before touching the opener, and settle the price with you before any work begins. The estimate is free, and the final bill never surprises you. Each completed job carries our 90-Day Done Right Promise in writing: if it’s not right, we come back and make it right, on every job, no arguing.
Gate Repair Services We Offer in Rendon
Gate Repair
From split welds to bent hinges, worn-out rollers to a post that’s finally surrendered to the clay, we repair the full mechanical picture. Metal fatigue on older pipe-frame gates is common in Rendon’s ranch-style properties, and we weld, reinforce, and re-align so the gate hangs square again. Learn more about our Gate Repair in Rendon.
Gate Installation
The right installation starts below ground: footings poured deep enough to resist the wet-dry heave cycle that undermines shallow-set posts. We build and hang gates on schedule, from measured order to written quote. We offer a free measure and written price, never a rushed quote. Learn more about our Gate Installation in Rendon.
Gate Motor & Opener
When the motor runs but the gate doesn’t move, or the opener clicks without engaging, the fix is usually in the program or the drive mechanism. We service nine major automation brands, including Ghost Controls, DoorKing, and Elite, so the first visit is the correct visit. Learn more about our Gate Motor & Opener in Rendon.
Gate Access Control
Keypads, intercoms, vehicle sensors, and safety edges: when the entrance works for you but refuses visitors, the problem is in the control system. We diagnose and repair access components, and we run the power lines and low-voltage wiring too.
Gate Parts & Welding
Rendon’s older ranch gates are riddled with good steel that’s lost its hold due to oxide and time. We carry a truck stock of common hinges, brackets, rollers, and control boards, and our welding repairs extend the life of gates that generalists would rip out and replace.
Neighborhoods We Serve in Rendon
We work driveways all across Rendon, from the horse properties south of FM 1187 to the cul-de-sac lots in the newer developments east of Gardens Acres. Our local dispatch typically gets a technician to your address within a few hours on repair calls, depending on the day’s route.
- Rendon Road corridor
- Gardens Acres
- Wildcat Road acreage properties
- Newt Patterson Road subdivisions
- Egan Street rural homesteads
Why Rendon’s Climate & Housing Affect Gate Repair
Rendon is unincorporated Tarrant County, which means no city-level gate setback or permit requirements. Installation quality varies wildly because no one was checking. Our technicians routinely encounter gates hung from T-posts driven straight into bare clay with no concrete whatsoever. That setup can stand a year or two, but the expansive soil underneath expands and contracts every season, and eventually the gate drifts so far out of level that the opener’s travel is wrecked and the hinges bind. February 2021’s hard freeze jammed openers and cracked hydraulic components across the county; in the week after, our repair volume in Rendon tripled, most of it frozen motors and stripped drive gears. If your gate has started moving differently since the last heavy rain or long dry spell, the soil under the posts is the prime suspect. We look at the whole problem: the steel, the footing, the motor, and how they work together.
Pricing for Gate Repair in Rendon
| Repair Type | Typical Range |
|---|---|
| Hinge replacement (single hinge) | $85-$160 |
| Post re-setting or reinforcement | $250-$550 |
| Opener troubleshooting and minor repair | $120-$260 |
| Weld repair on gate frame | $140-$320 |
| Full gate re-alignment | $200-$400 |
Every price is quoted and agreed before a single bolt is turned. We don’t start work on a handshake and then hand you a bigger bill. Estimates are free, and if you have a written estimate from another company, we’ll give you a free second opinion. There’s also a standing $50 discount on any repair over $250, and a permanent 5% Senior and Veteran discount on every job.
Service Area - Cities Near Rendon
While this page focuses on Rendon, our gate repair crews also serve nearby Burleson, Alvarado, Crowley, and Joshua. If you’re on the edge of those communities, call us and we’ll tell you straight whether we can get to you quickly.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Rendon
Most Rendon gate repairs land between $180 and $340 for common fixes like hinge work, opener board replacement, or re-alignment.
Structural work like post re-setting runs higher because it involves digging out the old footing, pouring concrete, and re-hanging the gate. Call (469) 564-8046 for an exact quote, and remember every estimate is free.
In most cases, yes. We keep same-day availability for genuine emergency repairs, and our dispatch team will tell you honestly when a technician can reach Rendon.
Call us at (469) 564-8046 and we’ll let you know the next available window.
Rendon sits on expansive clay that shrinks and swells with the seasons. Rain causes the soil under your gate posts to shift, which slowly pushes the posts out of plumb and pulls the gate out of level.
The permanent fix is deeper concrete footings or steel-reinforced posts, not another adjustment of the hinges. We can inspect your setup and tell you exactly what’s needed.
Yes. Our team is trained and equipped on nine major gate-automation brands including Ghost Controls, DoorKing, Elite, and Mighty Mule.
We carry common boards, remotes, and replacement parts on the truck, which is why most opener repairs in Rendon are completed on the first visit.
Every job is covered by our 90-Day Done Right Promise, and that’s a written guarantee, not a verbal one.
If something isn’t right within 90 days, we come back and make it right at no charge. Call (469) 564-8046 for details on the Keystone Standard.
Contact Ironworks Gate Co. in Rendon, TX
If your gate is stuck, sagging, or refusing to open, call (469) 564-8046 for a free estimate. A live person answers 24 hours a day, 7 days a week, and our service area covers all of Rendon. Whether you need a hinge replaced, an opener diagnosed, or a full re-alignment after the clay’s done its work, we’ll give you a square deal: upfront price, no surprises, and a written promise behind every job.
Written by Victor Salinas, Owner at Ironworks Gate Co. We serve Rendon, TX and the surrounding communities.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rendon Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett