Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Rendon
A new driveway gate in Rendon typically runs $2,400-$7,800 installed, depending on width, material, and whether you’re adding automation. On acreage properties with long private drives, that number shifts toward the upper end because the gate often has to span 14 to 20 feet and carry a heavy-duty operator. We’re Ironworks Gate Co., and we’ve been setting gates in southern Tarrant County long enough to know that Rendon clay does not forgive shortcuts. Call (469) 564-8046 for a free estimate, and we’ll come out, measure, and give you a written price before any work starts.
Why Ironworks Gate Co. Is Rendon’s Preferred Gate Installation Company
Rendon is different from the incorporated suburbs around it. There’s no city inspector checking your setback, no permit office reviewing your gate plan. That freedom cuts both ways: you can build what you want, but there’s also nobody stopping a bad installation from going in the ground. We see the results of that every month on properties off Rendon Road, along FM 1187, and back in the acreage off Conveyor Drive. Gates set without concrete, posts driven bare into clay, operators undersized for a 20-foot farm gate. All of it looks fine for a year, then the soil does what Blackland Prairie clay does.
Victor Salinas founded this company to do the work right the first time, and every job we complete carries our 90-Day Done Right Promise in writing. A live person answers our phone 24 hours a day, seven days a week. When you call about a gate in Rendon, you reach someone who knows the area, not a call center reading a script. Our technicians are background-checked and uniformed, and they work on your property the way they’d work on their own mother’s.
Our Gate Installation Services in Rendon
Most Rendon properties fall into two camps: older rural homesteads with original pipe-frame gates, and 2000s-era acreage developments with ornamental iron on long driveways. Both need a gate company that understands span, weight, and soil. Here’s what we install most often.
Driveway Gate
Driveway gates in Rendon run wider than what you’d find in a typical subdivision. A standard suburban gate might be 10 to 12 feet. Out here, we regularly set 16-foot and 18-foot driveway gates on properties where horse trailers and ranch trucks need clearance. The operator matters as much as the gate itself. We size the motor to the gate’s weight and cycle frequency, not the other way around.
Pedestrian Gate
Pedestrian gates on Rendon acreage often get overlooked until they start dragging or the latch stops catching. We set pedestrian gates with the same deep concrete footings we use for vehicle gates, because the clay heave that racks a driveway gate will do the same to a 4-foot walk gate. We also match the pedestrian gate style to your existing driveway gate so the property looks coherent from the road.
Sliding Gate
Sliding gates make sense on Rendon properties where a swing gate would eat up too much driveway space or where the driveway slopes. A cantilever sliding gate rides on rollers and doesn’t drag across the ground, which matters when you’ve got 6,000-pound gates moving across a frost-heaved track. We install sliding gates with proper concrete pad foundations and heavy-duty roller trucks built for the weight.
Swing Gate
Swing gates remain the most common choice across Rendon, especially double swing gates on acreage entrances. The challenge here is the hinge posts. Set them shallow, and Blackland Prairie clay will pull them out of plumb within two seasons. We set hinge posts 40 inches deep in concrete as standard practice on Rendon jobs, because we’ve seen too many gates sagging into the driveway from posts that were never anchored below the movement line.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We’re trained and equipped on nine gate-automation brands, and for Rendon customers that means we can service whatever is already on the property or install something new with confidence. We work regularly with Ghost Controls, DoorKing, and Elite operators on Rendon acreage, along with the heavier commercial-grade equipment those brands make for wide farm gates. When you call us about an operator issue, we arrive with the parts that matter for your brand on the truck, not a promise to order them and come back next week. Most jobs get finished the same visit.
Common Gate Installation Problems We See in Rendon Homes
- Posts racked out of plumb by clay heave. The Blackland Prairie clay under Rendon shrinks hard in summer and swells after spring rains. Posts set without concrete below the movement zone lean within 18 to 24 months, and the gate starts dragging or the operator binds.
- Undersized operators on wide farm gates. A 16-foot pipe gate with a residential opener rated for 12 feet will burn out its gears fast. We see it on older ranch properties up and down FM 1187. The fix is a commercial-grade operator sized for the actual gate weight.
- Solar openers undercharging on shaded driveways. Tree-lined driveways are lovely until the solar panel stops getting enough sun. After February 2021, we replaced dozens of solar-charged operators that had died mid-cycle during the hard freeze and never recovered.
- No safety edges on automated gates. On older Rendon installations, especially DIY and agricultural setups, we often find automatic gates with no photocells, no safety edges, and no reversing mechanism. A 600-pound gate closing on a child, a dog, or a horse is a serious injury. We install entrapment protection on every automated gate we touch, and we’ll retrofit older gates during any service call.
Pricing for Gate Installation in Rendon, TX
Here’s what Rendon homeowners can expect to pay, based on the jobs we’ve priced across the area.
- Basic single swing gate, manual: $1,400-$2,600 installed, including deep concrete footings.
- Double swing gate, manual: $2,800-$5,200, depending on width (14-20 feet is common on acreage).
- Automated single swing gate with operator: $3,200-$5,800, including safety photocells and keypad entry.
- Automated double swing gate with heavy-duty operator: $5,500-$9,500 for 16-to-20-foot spans with commercial-grade automation.
- Sliding gate, automated: $4,800-$8,400, including concrete pad and track or cantilever hardware.
- Solar-powered opener add-on: $700-$1,400 above the operator cost, sized to the gate and the available sun on your driveway.
Every quote is written, itemized, and agreed to before we turn a single bolt. You’ll know the exact number before work begins, and that’s the number on the invoice. Call (469) 564-8046 and we’ll schedule a free measure and estimate at your Rendon property.
We Also Serve Cities Near Rendon
Our Gate Installation team works throughout southern Tarrant County and northern Johnson County. If you’re in Burleson, Alvarado, Crowley, or Joshua, we’re close by. Learn more about Gate Installation in Rendon or call us directly for service anywhere nearby.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Rendon
Your post was almost certainly set without concrete reaching below the clay movement zone. Rendon’s Blackland Prairie clay expands dramatically after spring rain and contracts in summer heat. A post set 24 inches deep in bare clay gets pushed and pulled seasonally until it racks out of plumb. The fix is resetting hinge posts 40 inches deep in concrete, which puts the footing below the active heave line. Call (469) 564-8046 and we’ll assess the post depth and give you a written price to reset it properly.
Yes, but only with a solar system sized for the gate’s weight, width, and your driveway’s actual sun exposure. A 20-foot double gate with a heavy-duty operator draws significant current on every open-close cycle. If your driveway is shaded by mature oaks, a standard solar panel will undercharge in winter and the gate will fail when you need it most. We spec solar openers with enough panel wattage and battery reserve for your specific property conditions. We’ve installed solar automation on horse properties throughout the Rendon area, so we know what the local tree cover and winter angle demand.
No. Rendon is unincorporated Tarrant County, so there is no municipal permit process, no city setback review, and no inspector signing off on your gate installation. That means you can proceed without paperwork, but it also means there is no local government checking whether your gate is structurally safe or your operator has proper entrapment protection. We install to the same safety standards we would use in any incorporated city, even when nobody requires it. Get a free estimate at (469) 564-8046.
For a driveway gate on Rendon clay, hinge posts should be set 40 inches deep in concrete with the hole bell-shaped at the bottom to resist uplift. Anything shallower sits within the active heave zone, where the clay expands and contracts from roughly the surface down to about 30 inches on most Rendon lots. We use 40 inches as our standard because the extra depth is cheap insurance against a gate that drags after its second wet season.
During a hard freeze like February 2021, gate operators with worn capacitors, weak batteries, or moisture in the housing tend to fail outright or refuse to move until temperatures climb. Solar-charged systems undercharge in the short, cloudy winter days leading up to a freeze, and a dead battery at 15 degrees means the gate doesn’t open. We service and harden operators against cold-weather failure: sealed housings, fresh batteries, and solar arrays sized for Rendon’s winter sun angle. If your gate is still acting up after a freeze, call (469) 564-8046 and we’ll send a technician to diagnose it.
Call Ironworks Gate Co. for Gate Installation in Rendon
If you live on acreage off Rendon Road, back along FM 1187, or in any of the ranch properties throughout Rendon, we know the ground you’re building on. We know the clay moves, the wide gates are heavy, and the power might not reach your driveway. We size the posts, the gate, and the operator for your actual property, not a formula from a catalog. Call (469) 564-8046 for a free estimate. A live person answers, day or night. We’ll come out, measure, and hand you a written price before any work begins. Done right – and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rendon and the surrounding Tarrant County acreage.