Gate Parts & Welding in Burleson - Made to Measure, Written Price

Trusted Gate Parts & Welding for Burleson Homeowners

Burleson Gate Parts & Welding typically costs between $180 and $650 for hinge or latch repairs, while full post replacement or custom welding work ranges from $450 to $1,400 depending on the size of the gate and the condition of the surrounding structure. Most hinge replacements and roller swaps are completed in a single visit, often the same day you call. Ironworks Gate Co. has served Burleson homeowners for over 42 years, since 1984, and Victor Salinas leads a team that treats every weld like it’s holding up a gate on his own mother’s driveway.

Call (469) 564-8046

If your gate sags, drags, or won’t latch, call us at (469) 564-8046. For Emergency Gate Parts & Welding in Burleson, TX, a live person answers 24 hours a day, 7 days a week – not a voicemail tree, not a callback queue. We’ll ask what the gate is doing, tell you what it likely needs, and get a technician to your Burleson home with the right parts already on the truck.

Key Takeaways:

• Hinge and latch repairs start around $180 and are often done the same day.
• Every job is protected by our written 90-Day Done Right Promise.
• We stock OEM and heavy-duty replacement parts for gates of every age and make.
• Free estimates, and the price is agreed before any work begins.

What Our Gate Parts & Welding Service Includes

Gate parts fail gradually, then all at once. A hinge wears, the gate drops a quarter inch, the latch stops lining up, and one morning it won’t close at all. Our job is to catch it before that morning. Here’s what we handle, and how we handle it.

Hinge Replacement

Hinges are the single most common failure point on a driveway gate, and in Burleson’s clay soil, shifting posts put extra strain on them every year. When a hinge wears or breaks, the gate sags toward the latch side and starts scraping the ground or the post. We remove the old hinge, inspect the post for cracks or rust, weld or bolt a heavy-duty replacement into place, and set the gate so it swings true with an even gap top to bottom.

Post Replacement

A leaning post is a structural problem, not a cosmetic one. In Burleson, where summer heat dries the ground and spring rains swell it, posts set shallow or plumbed wrong will move within a few seasons. We remove the failing post, check the concrete footing, and set a new post deep enough to hold the gate without shifting, then weld the hinge brackets back on and hang the gate at the correct height and pitch.

Rail Repair

The top and bottom rails carry the gate’s weight and keep the pickets from twisting out of alignment. When a rail cracks or buckles, the gate flexes, and that flexing shortens the life of every hinge and latch on it. We repair or replace damaged rails and strengthen the corners where rails meet the frame, so the gate moves as one solid piece instead of wobbling in sections.

Custom Welding

Some gates were built for a driveway that hasn’t changed, but many Burleson homes have gates that were sized to a different vehicle or an older layout. We weld custom modifications, from extending a gate leaf to adding a matching section for a wider opening, to fabricating a new rack for a slide gate or a mounting plate for a keypad. The weld is never the weak point; we grind, finish, and prime every joint before we leave.

Gate Rollers

Slide gates ride on steel rollers that grind against the track every time the gate moves. Burleson’s dust and occasional heavy rain work grit into the rollers, and once one binds, the motor strains and the chain or belt takes the abuse. We replace worn rollers, adjust the guide wheels, and set the track height so the gate rolls without dragging or wobbling, which extends the life of the opener behind it.

Latch & Lock

A gate that won’t latch is a gate that won’t stay closed, and a lock that’s fighting the latch is a lock that will fail. We rebuild or replace latches, align strike plates, and free up locks that have been forced, rusted, or painted over so many times they’ve lost their travel. We can also add a lock receiver and stand-alone keypad to a gate that never had one, without pulling wire across the driveway.

Brands We Service for Gate Parts & Welding

We work on more than just the gate. The hardware behind it matters too. Ironworks Gate Co. is trained and equipped on nine major gate-automation brands, including Ghost Controls, DoorKing, and Elite. If your gate has a Ghost Controls opener, the hinge and roller work we do has to play well with the travel limits and the ramping profile of that board. We’ve replaced hundreds of Ghost Controls hinge brackets and adjusted their travel stops, and we know how the board responds to a gate that’s been hanging low.

For DoorKing and Elite systems, the gate’s physical alignment is just as critical. DoorKing slide and swing operators are built for heavy gates, but they’ll fight a gate that’s binding or dragging, which burns contactors and shear pins. We’ve worked on enough DoorKing and Elite installs around Burleson to know exactly where the rail and the rack need to sit relative to the drive gear and chain. Whether you have one of those makes or something else entirely, we can supply or fabricate the parts your gate needs and make them work with the motor you already have.

Signs You Need Gate Parts & Welding Right Now

Most gate failures give you warning. These are the signs we hear about most often from Burleson homeowners, and each one is worth a call before the gate gives up entirely.

• The gate sags toward the latch. A visible drop, even half an inch, means a hinge or a post is wearing. The more it sags, the harder the latch has to work, and the faster the rest of the hardware follows.
• The gate scrapes or drags on the ground. If you see a groove forming in the driveway or hear metal on pavement, the gate isn’t sitting square. That friction is loading the hinges, the rollers, and the opener motor at the same time.
• The latch won’t catch without lifting the gate. Lifting the gate to close it is a sign the hinges have dropped and the latch and strike plate are no longer aligned. It won’t fix itself, and every lift is putting more stress on the post.
• The gate wobbles or trembles while it moves. A gate that shudders mid-travel usually has a broken rail, a cracked weld, or a roller that’s seized. The opener is absorbing the vibration, and opener component failure is next.
• You hear creaking, popping, or a grinding sound near the hinges or track. Metal-on-metal noise is friction, and friction means wear. A quick lubrication might quiet it briefly, but if the noise comes back within days, the parts behind it are failing.

Our Gate Parts & Welding Process - Step by Step

We’ve done this long enough to know that a transparent process is the difference between a one-time customer and a neighbor who calls us again in a decade. Here’s how every Best Gate Parts & Welding in Burleson, TX job goes.

1. 1
   Call and describe the gate. When you call (469) 564-8046, a live person answers at any hour, day or night. We’ll ask about the gate’s size, how it’s driven, and what it’s been doing. That helps us bring the right parts on the first trip.
2. 2
   On-site diagnosis. A background-checked, uniformed technician arrives in a stocked van and walks the gate with you. We check the hinges, posts, rails, rollers, and latch, and we measure the gap, the drop, and the square before touching anything. We’ll tell you what’s urgent, what can wait, and what it’ll cost before we start.
3. 3
   Upfront quote and approval. You get a written price for the work, quoted and agreed before a single bolt is turned. No surprises on the bill. If the work is over $250, you’re also looking at our $50-off repair offer, and we honor a 5% senior or veteran discount on every job.
4. 4
   Parts, welding, and repair. We replace the worn parts, weld where welding is needed, dress and prime the welds, and rehang the gate to factory-spec alignment. If the opener is one of the nine brands we service, we run a full cycle test to confirm the travel limits and force settings match the repaired gate.
5. 5
   Final walkthrough and the Done Right Promise. You see the gate run, you check the latch, and we leave the work area cleaned up. Every job is covered by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. No paperwork, no arguing.

How Much Does Gate Parts & Welding Cost in Burleson?

Gate Parts & Welding Near Burleson - Our Service Area

We work throughout Burleson and the surrounding communities, including Joshua, Rendon, Everman, Keene, Forest Hill, Kennedale, Cleburne, Benbrook, and Mansfield. For homeowners in Alvarado and Crowley, we’re usually on-site within the same day for hinge and latch repairs, since most jobs are handled in one visit. Our team also serves the wider Johnson County area, and if you’re anywhere near Highway 174 or I-35W, you’re well within our normal route.

Frequently Asked Questions - Gate Parts & Welding in Burleson

Schedule Your Gate Parts & Welding Service in Burleson Today

If your gate is sagging, dragging, rattling, or refusing to latch, call (469) 564-8046. You’ll talk to a real person, get a straight answer about what’s likely wrong, and schedule a free, no-obligation estimate. The price is agreed before we start, the work is done right, and the 90-Day Done Right Promise is in writing. That’s the deal we’ve offered Burleson homeowners for over 42 years, and it’s not changing.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burleson since 1984.