Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rendon
Gate repair in Rendon usually costs between $185 and $420 for common hinge, post, and realignment work, while full electric opener replacement on a legacy ranch gate typically runs $1,100 to $2,800. Most jobs we handle in Rendon are completed in a single visit because our trucks carry the parts this area actually needs: barrel hinges, heavy-duty post brackets, and control boards for the opener brands found on the long driveways off Rendon Road and Wilshire Boulevard. Call us at (469) 564-8046 and a live person answers, any hour, any day. We’ve been fixing gates in unincorporated Tarrant County long enough to know what the clay does to a post footing out here.
Why Ironworks Gate Co. Is Rendon’s Preferred Gate Repair Company
Rendon isn’t like the suburbs to the north. There’s no city inspector checking gate setbacks, no permit office tracking who hung what. That freedom means homeowners out here have gates of every imaginable construction: forty-year-old pipe-frame swing gates welded by someone’s uncle, ornamental iron driveway gates from 2000s-acreage developments, and T-post gates that were never set in concrete at all. We see all of it, and we respect the people who’ve lived on these properties for decades. They’re not looking for a quick patch. They want the gate to close like it did the day it was hung.
Victor Salinas leads our crew, and his standard for every job in Rendon is the same one we’ve kept for over 42 years as a company: if it’s not right, we come back. That’s the 90-Day Done Right Promise, in writing, no fine print. Our technicians are background-checked and uniformed. They work in a customer’s home the way they would work in their own mother’s. When you call about a dragging gate on a ranch property near Rendon Middle School or a frozen opener on a driveway off Farm-to-Market 1187, we know what you’re dealing with before we even arrive. Most Rendon repairs are finished the same day. A live person answers every call, 24 hours a day, 7 days a week.
Our Gate Repair Services in Rendon
Electric Gate Repair
Electric gate repair in Rendon usually runs $225 to $650 for control board replacement, limit switch adjustment, or photo-eye realignment on most automatic driveway gates. Older operators on legacy Rendon properties often fail hard after a freeze-thaw cycle cracks a hydraulic seal or a control relay burns out. We service LiftMaster, Ghost Controls, and DoorKing systems regularly out here, and we stock the common boards and safety sensors these systems need so you’re not waiting on a parts order from out of state. The fix is quoted before any work starts, and that’s the number you pay.
Automatic Gate Repair
Automatic gate repair in Rendon is one of our most common calls, especially after the wet spring months. The Blackland Prairie clay under Rendon swells when it rains and shrinks in the hundred-degree summer heat. That constant movement pulls posts out of plumb, and the first symptom is usually an automatic opener that groans, trips its breaker, or reverses mid-cycle. We diagnose the whole system: the motor, the limit switches, the safety edges, and the post alignment. Sometimes the opener is fine and the post is the culprit. A repair billed honestly means we tell you which one it is.
Hinge & Post Repair
Hinge and post repair in Rendon typically costs $190 to $480 depending on whether we’re welding new barrel hinges onto a pipe-frame gate or excavating and re-setting a post in concrete. This is the structural work that separates a lasting repair from a wobble that returns next season. In Rendon specifically, the soil movement is the enemy. A post set shallow in bare clay will lean again in eighteen months no matter how tight the bolts are. We set posts below the frost and moisture-swell line, and we use hinges rated for far more weight than the gate leaf actually puts on them. Done right, and backed in writing.
Gate Realignment
Gate realignment in Rendon runs $175 to $390 for most driveway gates. We adjust the hinge side, shim or re-weld the post brackets, and set the latch and opener arms so the leaf swings true. A gate that drags on the ground or binds against the post isn’t just noisy; it’s slowly tearing its own hinges apart and overloading the opener motor. On Rendon’s clay soil, realignment isn’t a once-in-a-decade job. It’s seasonal maintenance for many properties, especially those with original agricultural-grade gates that were never built to hold an automatic operator. Call us at (469) 564-8046 and we’ll get it swinging straight again.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We’re trained and equipped on nine gate-automation brands, and the ones we see most on Rendon driveways are Mighty Mule, DoorKing, and Elite. Mighty Mule units are common on the agricultural and hobby-farm gates around this area, while DoorKing and Elite show up on the newer ornamental iron gates in the acreage developments. Our trucks carry the common control boards, remotes, and safety sensors for these brands, which means most Rendon repairs are completed in one visit instead of two. If your opener predates modern safety systems, we’ll tell you honestly what can be retrofitted and what’s cheaper to replace.
Common Gate Repair Problems We See in Rendon Homes
- Post lean from clay heave. The expansive Blackland Prairie soil under Rendon contracts in dry summers and swells after spring rain. Posts set in shallow footings or driven directly into bare clay lean a little more each cycle. The gate drags, the opener binds, and eventually the post has to be excavated and re-set. This is the single most common repair we do in Rendon, and it usually comes back seasonally until the footing is done properly.
- Hydraulic freeze damage on older operators. Legacy hydraulic openers from the 1990s and early 2000s, especially on original ranch properties, crack seals and burst hoses during hard freezes like the February 2021 ice storm. The jam that follows often leaves the gate stuck halfway open for days. We replace the damaged components and check whether the rest of the unit is worth rebuilding.
- Sagging pipe-frame gates hung on T-posts. Many older Rendon gates were built from steel pipe and hung from T-posts driven into the ground with no concrete. They look fine for a year or two, then the hinge side drops and the latch no longer lines up. The sag strips keypad entry readers when alignment drifts far enough. We re-set the posts in concrete footings and weld on new hinges sized for the actual gate weight.
- Obsolete control boards without modern entrapment protection. Gates installed before current safety standards often have no photo-eyes or contact edges. When the board fails, there’s no simple swap: the wiring and safety sensors need to be added to meet modern code. We handle that retrofit cleanly, or we’ll recommend a new operator if the old one has become a money pit.
Pricing for Gate Repair in Rendon, TX
Gate repair pricing in Rendon breaks down like this: a basic service call with hinge tightening or latch adjustment starts around $185. Realignment work is typically $175 to $390. Hinge replacement with welding runs $190 to $480. Post excavation and re-setting in concrete, the big one out here, is $400 to $950 depending on gate size and footing depth. Electric opener repair starts near $225 and goes up to $650 for control board replacement. Full opener replacement on a legacy gate is $1,100 to $2,800. Every job is quoted before any work starts. You agree to the number first, and the invoice matches it. We offer a $50 discount on any repair over $250, a free second opinion on any written estimate, and a 5% senior and veteran discount, always. Call (469) 564-8046 for a free estimate.
Our techs pulled up to a ranch gate on Rendon Road in the Legacy Acres area last August after a dry spell had done its work. The hinge post on a 16-foot pipe-frame swing gate had racked a good three inches out of plumb, and the LiftMaster operator was groaning against the bind. We re-set the post in a proper concrete footing, welded new heavy-duty barrel hinges, and re-aligned the gate so the operator didn’t have to fight the clay heave every cycle. That’s the kind of structural repair that lasts years, not months, and it’s the reason people in Rendon call us when the gate starts misbehaving.
We Also Serve Cities Near Rendon
Our Gate Repair team covers Rendon and the surrounding communities, including Burleson, Alvarado, Crowley, and Joshua. If you’re just outside Rendon on a county road or acreage property, we’re still your crew. You can learn more about our local coverage at Gate Repair in Rendon and see how we approach the specific soil and gate conditions this part of Tarrant County throws at homeowners.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Rendon
Most automatic gates in Rendon need realignment every 12 to 18 months because of the seasonal clay movement under the posts. If your gate was set in a proper concrete footing below the moisture line, you might get two to three years between adjustments. Gates on original T-posts or shallow footings will need attention after every wet-dry cycle, which means at least once a year. We’ll set it straight and tell you honestly whether the footing is the root cause. Call (469) 564-8046 to schedule a realignment.
Yes, in many cases a 1990s agricultural gate opener can be retrofitted with modern photo-eye safety sensors, but it depends on the control board and whether there’s a low-voltage input available. Older units without an accessory terminal require a small relay and transformer wired in, which we install cleanly and safely. Some ancient boards simply don’t support external safety devices at all, and at that point replacement is usually the cheaper long-term answer. We’ll show you the options and quote each one before any work begins.
In Rendon, the clay absorbs spring rain and swells, lifting the soil around shallow footings; then winter’s dry air and occasional deep cold shrinks it again. The post doesn’t settle back into the exact same position it started from. Each cycle leaves it a little further out of plumb, and by winter the cumulative lean becomes obvious. The fix is a footing dug below the expanded soil line, which we do regularly for post and hinge repair jobs throughout Rendon.
After a hard freeze in Rendon, the safest first step is to disconnect the opener and manually swing the gate to check whether the hinges and posts are still moving freely. If the gate swings but the motor won’t move it, the hydraulic fluid has likely thickened or a seal cracked. Don’t force the opener; that risks stripping the gear or burning the motor. Call us at (469) 564-8046 and we’ll diagnose the freeze damage, replace what’s broken, and have the gate moving again. A live person answers around the clock.
On Rendon properties, that symptom is usually the post alignment or the hinges binding long before the motor loses torque. A properly aligned gate leaf puts very little load on the opener; once the post leans a few degrees, the leaf drags and the motor works against its own mounts. We check the mechanical path first, then load-test the motor and gear. If the motor is healthy, the repair is mechanical and costs less. If it’s worn from months of fighting the bind, we’ll quote the rebuild honestly.
Call Ironworks Gate Co. for Gate Repair in Rendon
If your gate is dragging, leaning, stuck, or refusing to open, call us at (469) 564-8046. A live person answers, not a voicemail tree. We’ll schedule a time that works for you, show up when we say, and give you an upfront price before a single bolt is turned. Every repair is backed by our 90-Day Done Right Promise, in writing. Victor Salinas and our team have been fixing gates across Rendon for years, and we plan to be here for decades more. Call today for a free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rendon and Tarrant County with honest gate repair since 1984.