Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Burleson
Gate repair in Burleson usually runs $180-$640 for a single service call, and most hinge, latch, and realignment jobs are completed the same day. We know Burleson’s gates and we know why they fail here. If your gate is dragging, sticking, or refusing to close, call (469) 564-8046 and a live person will answer, day or night.
Ironworks Gate Co. has spent over 42 years working on driveway and estate gates across North Texas. Burleson is one of the places our crews know best. The soil here is different from what you’ll find fifteen miles up the road, and that soil is usually the real reason a gate stops working. Our technicians are trained to diagnose the actual cause, not just tighten a hinge and hope for the best.
Why Ironworks Gate Co. Is Burleson’s Preferred Gate Repair Company
We built our reputation in this area one gate at a time. Homeowners along Renfro Street, in the established neighborhoods south of Hidden Creek, and in newer subdivisions near the city’s expanding edges call us because we fix the problem and stand behind the work in writing.
Our Gate Repair team serves Burleson with background-checked, uniformed technicians who arrive when we say they will. Every job gets a written price before work begins, and every completed repair carries our 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No arguing, no paperwork, no exceptions.
We also understand that in Burleson, fixing a gate properly usually means dealing with what’s under the post, not just what’s attached to it. A repair that ignores the clay soil under your gate will fail inside a year or two. We do the job so it holds.
Our Gate Repair Services in Burleson
Hinge & Post Repair
This is the most common call we get in Burleson, and it’s no mystery why. The black gumbo clay under this city swells when wet and shrinks when dry, and it does both with surprising force. A gate post that was perfectly plumb in May can be leaning three inches by September. We remove the old post, auger a proper 36-inch footing with a wider concrete diameter, reset the post, and then address the hinge or latch. Order matters here. Skip the refoot and you’ll be calling us again by the next wet season. A typical hinge and post repair in Burleson runs $220-$480 depending on post size and concrete work.
Gate Realignment
When a swing gate starts scraping the latch side or a slide gate begins grinding on its track, the frame has usually been pulled out of square by ground movement or wind load. We realign the frame, re-square the gate, and reset the hinges or rollers so the gate travels smoothly. In Burleson, realignment often pairs with post repair, because you can’t hold a plumb line on a moving foundation. Most realignment jobs run $150-$350 when posts are still sound.
Automatic Gate Repair
Automatic openers add motors, control boards, photo eyes, and limit switches to the picture. When the gate itself is out of alignment, the opener strains against the bind, and over time that strips drive gears and burns out motors. We service Ghost Controls, DoorKing, Elite, and Mighty Mule systems regularly in Burleson, along with five other major brands. A typical automatic gate repair, including the service call, runs $190-$520 depending on what failed.
Electric Gate Repair
Electric gate systems on Burleson properties range from simple single-operator swing gates to multi-panel slide gates with loop detectors and keypads. When a board fails or a sensor misreads, the gate either won’t move or won’t stop. We diagnose the exact component, show you what’s failed, and quote the repair before we turn a wrench. Most electrical repairs run $185-$450 in this market, and our trucks carry common parts for the brands we service.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burleson
Our technicians maintain certified training on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Burleson because the subdivision built in 2004 doesn’t use the same opener as the custom iron gate installed last year on the city’s edge. We stock common parts in our trucks for faster turnaround, and when a specialty part is needed, we order it immediately and schedule the follow-up fast. One visit, correct diagnosis, right fix.
Common Gate Repair Problems We See in Burleson Homes
- Posts leaning out of plumb. Burleson’s black gumbo clay heaves so aggressively between drought and rain that gate posts routinely move inches within a single season. Any repair that skips refooting to code depth will fail again by the next wet cycle.
- Wind load damage on solid infill gates. Solid cedar and decorative iron gates catch a lot of north Texas wind. Storms push against the gate face, twisting the frame and pulling hinges out of the post. We see this most often after spring storm fronts move through Johnson County.
- Hinge welds snapping after saturation. When winter rains soak the ground, footings can sink just enough to bind a swing gate. The hinge takes the strain until the weld cracks. We reinforce the hinge, but the real fix starts under the post.
- Automated sensors knocked out by hail. Golf-ball hail cracks photo eye lenses and shakes loose safety sensor brackets. When loop detectors or photo eyes misread, the gate won’t hold open or won’t reverse, which creates a safety problem, not just an inconvenience.
Pricing for Gate Repair in Burleson, TX
We tell you the price before we start. Always. Here’s what Burleson homeowners can expect for common repairs:
- Hinge and post repair: $220-$480
- Gate realignment: $150-$350
- Automatic opener repair: $190-$520
- Electric control board replacement: $185-$450
- Weld and frame repair: $140-$400
What moves the price is the condition of the post, the size of the gate, and whether automation needs work. We offer $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (469) 564-8046 and we’ll give you a straight quote over the phone and a written price before any work begins.
Black Gumbo Clay: The Burleson Gate Killer
If there’s one thing a Burleson homeowner should understand about their gate, it’s this: the ground underneath it is moving. The Blackland Prairie’s expansive clay soil shrinks during summer drought and swells after heavy rain, and it does so unevenly. One side of your gate post can settle while the other side holds, throwing the entire gate out of square.
We got called to a home near Old Town Burleson where a wooden swing gate had dragged on the latch side for months. The homeowner had already had a handyman tighten the hinges twice. Our crew found the hinge post set in a minimal 1980s concrete plug, now tilted four inches out of plumb. We pulled the post, augered a 36-inch footing with a wider concrete diameter, reset it, and reinstalled a LiftMaster gate operator with new safety photocells. The gate opened and closed square on the first try.
That’s the repair sequence Burleson gates actually need. Not a hinge swap. A footing fix first. Our crews are trained to check the post before touching the hardware, because in this soil, the post is the problem more often than not.
Storm and Wind Exposure Around Burleson
Burleson sits in open country south of the metro, with few natural windbreaks. When a spring storm rolls through with 50-mile-an-hour gusts, a solid infill gate absorbs a lot of force. That force has to go somewhere. It goes into the hinges, the post, or the opener’s drive mechanism.
After severe weather, check your gate for these signs: the latch no longer lines up, the gate drags on one side, or the opener groans when it runs. Those are indicators the frame has twisted or the post has moved. A quick realignment now prevents a snapped hinge or a stripped gear later. We typically schedule storm-damage calls in Burleson within 48 hours.
If your power is out and you need to open an automatic gate, every system we install or service includes a manual release mechanism. For most swing gate operators, you’ll find a release handle or key on the operator itself. Turn the release, and the gate swings free by hand. For slide gates, the release disengages the drive gear so you can push the gate along its track. If you’re not certain where yours is, call us and we’ll walk you through it on the phone, right then.
We Also Serve Cities Near Burleson
Ironworks Gate Co. covers Burleson and the surrounding communities. If you’re in Crowley, Joshua, Alvarado, or Kennedale, the same crews and the same written guarantee apply. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews reach Burleson homes directly, usually within the same day for repair calls.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Burleson
Because Burleson’s black gumbo clay heaves and shrinks with every drought-to-rain cycle, and a post set in a shallow or narrow footing will move with the soil. If you bolt a new hinge onto a post that’s still tilting, the hinge will bind and fail again. The post footing must be corrected first, dug to code depth with adequate concrete diameter, and then the hardware gets reset. That’s the only sequence that holds past the next wet season, and our crews won’t skip it to save time. Call (469) 564-8046 if your gate has started dragging or sticking.
Every automatic gate operator has a manual release, usually a handle, key, or pull-cord on the operator housing. On a swing gate, activating the release lets the gate arm move freely so you can push it open by hand. On a slide gate, the release disengages the drive gear from the track. You don’t need to force anything. If you can’t locate the release or the gate won’t budge after pulling it, call us and we’ll talk you through the exact model on your gate. Word of caution: high-tension springs and heavy gate panels can cause serious injury if mishandled, so if anything feels seized or bound, stop and let a trained professional take over.
Yes. A solid cedar board gate or a fully welded iron gate acts like a sail in a 50 mph gust. The wind pressure flexes the frame, and over repeated storm cycles, that flex becomes a permanent twist. Hinges pull out, latches stop aligning, and openers labor against the bind. The fix involves realigning the frame, reinforcing weak joints, and sometimes adding a cross-brace. A straight gate is a strong gate. Call (469) 564-8046 and we’ll assess whether your gate survived the last front square.
First, check the safety sensors near the bottom of the gate path. Heavy rain in Burleson often splashes mud onto photo eye lenses or knocks the sensor brackets out of alignment. If the eyes are dirty or misaligned, the opener thinks something is in the gate’s path and refuses to close. Wipe the lenses gently with a dry cloth. If it still won’t close, the issue may be a soaked control board, a shifted post, or a shorted wire. Don’t bypass the sensors to force it closed; that’s how injuries happen. Call us and we’ll diagnose it properly, most often the same day.
Yes. Automatic gate operators installed in residential settings must comply with UL 325 safety standards, which require entrapment protection such as photo eyes, edge sensors, or an inherent reversing mechanism. This isn’t a paperwork formality; it prevents a closing gate from crushing a person, a pet, or a vehicle. When we repair or install any automatic opener in Burleson, we verify that the entrapment protection is present and working before we consider the job done. If your gate doesn’t reverse when it meets resistance, stop using the automatic function and call us. Estimates are free.
Call Ironworks Gate Co. for Gate Repair in Burleson, TX
Your gate is the first thing people see and the thing that keeps your property secure. When it’s dragging on the latch side or groaning from the opener, you want it fixed by someone who understands why Burleson gates fail in the first place. We’ve been doing this work for over four decades, and we put our name on every job with a written 90-Day Done Right Promise. A square deal, an upfront price, and a live person on the phone. Call (469) 564-8046 any time, day or night, or click to request a free estimate. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burleson and surrounding communities for over 42 years.