Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Rendon
Gate Installation in Rendon usually comes down to one question: can the existing gate be saved, or is it time to start fresh? In most cases we can save it. A leaning hinge post, a cracked weld, a worn roller, a latch that no longer catches, these are repairable problems, and fixing them correctly costs a fraction of a full replacement. Ironworks Gate Co. serves Rendon homeowners with same-week scheduling and a live person who answers the phone around the clock. Call (469) 564-8046 and you’ll speak to someone who can actually tell you what your repair will cost before we ever roll a truck.
Why Ironworks Gate Co. Is Rendon’s Preferred Gate Parts & Welding Company
We’ve been doing gate work for over 42 years, and Rendon properties keep us honest. This is not a suburb where every gate is the same ornamental iron rectangle from the same builder. Out here, we see T-posts driven bare into clay, ranch gates built from salvaged pipe, slide rails welded together in a barn decades ago, and modern automated gates hung on posts that were never meant to carry an opener. Our welders know which of these can be strengthened and which need to be replaced, and we tell you the truth either way.
Our Gate Parts & Welding team approaches every Rendon job the same way: diagnose the root cause, not just the symptom. A sagging gate is rarely just a worn hinge. It’s usually a post that moved. A gate that won’t stay closed is rarely just a bad latch. The frame has probably racked. We fix the underlying problem so you’re not calling us back in eight months for the same repair. Every job is backed by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Victor Salinas leads our team, and he’s the kind of person who answers the phone after hours because a gate that won’t close is a security problem, not a scheduling inconvenience. That’s why our customers in Rendon keep our number. They know we’ll show up when we say we will, and they know the price is settled before the first bolt gets turned.
Our Gate Parts & Welding Services in Rendon
Hinge Replacement
Hinges carry the full weight of the gate, and on Rendon’s clay soil they carry it while the ground beneath them heaves and settles. We replace worn or seized hinges with heavy-duty bearings or weld-on barrel hinges sized to the actual gate weight. If the original hinge was undersized from the start, which happens often on DIY installs around here, we’ll tell you and upgrade it properly.
Post Replacement
This is the single most common job we do in Rendon. The original post wasn’t set in concrete, or the footing was too shallow, or it was a T-post to begin with. We remove the old post, auger a proper hole, set the new steel post in concrete, and let it cure before re-hanging the gate. Done correctly, the post outlasts the gate.
Rail Repair
Slide gates and long driveway gates depend on a straight rail. When a weld cracks or the rail bends, the gate jerks, binds, and eventually stops moving. We repair or replace rails in place, keeping the existing gate panels when they’re still sound. For Rendon properties with older pipe-frame gates, a rail repair is often all the gate needs to work another decade.
Custom Welding
Not every problem has a parts listing. Cracks in ornamental iron, broken pickets, a latch bracket that doesn’t exist anymore, a hinge mount that needs to be fabricated to fit a non-standard post. Our welders do this work on-site in Rendon, matching the existing metal and finish so the repair doesn’t look like a patch. Custom welding is what makes a 40-year-old gate close like the day it was hung.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We service and repair Rendon Gate Motor & Opener systems from the brands homeowners actually have on their driveway gates. Ghost Controls and Mighty Mule units are common on acreage properties where homeowners installed their own openers. DoorKing and Elite appear on the heavier estate-style gates and commercial-grade installations east of town. We stock common control boards, remotes, and safety edge components for these brands, which means many repairs happen in one visit instead of two. Whatever opener is on your gate, the fix is done right the first time.
Common Gate Parts & Welding Problems We See in Rendon Homes
- Leaning hinge posts from clay heave. The Blackland Prairie clay under Rendon shrinks in summer and swells in spring. Posts without deep concrete footings get pushed and pulled out of plumb season after season until the gate binds and the operator strains. We see this on nearly every property with a gate older than five years.
- Operator burnout from misaligned gates. When the gate drags or the track is out of level, the operator motor works twice as hard. A three-year-old opener failing is usually not the opener’s fault. It’s the post that moved, the rail that sagged, or the hinge that seized, and until you fix that, the new opener will burn out too.
- Cracked welds on aging pipe-frame gates. Older ranch gates around Rendon were welded decades ago, often with whatever rod was lying around. Freeze-thaw cycles and years of use stress those original welds until they crack at the joints. A cracked weld near a hinge or latch is a structural failure waiting to happen.
- Rotting or rusting components on legacy wooden gates. Wood-post gates from the original homestead era are still everywhere in Rendon. The wood rots at ground level, the hinges pull loose, and the gate sags into the dirt. We can replace the rotten section, set a steel post, and keep the original gate panels if that’s what you want.
Pricing for Gate Parts & Welding in Rendon, TX
Here’s what you can expect to pay for common gate parts and welding repairs in Rendon. A single hinge replacement, including the hinge and labor, typically runs $150 to $280. Replacing a leaning post with a properly set steel post in concrete usually falls between $450 and $850, depending on depth and whether we need to cut through old concrete or tree roots. A rail repair or small custom weld job on an existing gate generally lands in the $180 to $400 range. Full gate realignment with operator adjustment runs $300 to $600. Every price is quoted and agreed before we start, in writing. Call (469) 564-8046 for a free estimate on your specific gate.
We Also Serve Cities Near Rendon
Our service area reaches the communities around Rendon, including Burleson, Alvarado, Crowley, and Joshua. If you’re just outside Rendon proper, Gate Parts & Welding in Rendon is still very likely within our regular service route. Call us and we’ll let you know exactly when we can be there.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Rendon
Yes, and this is one of the most common saves we do in Rendon. Most ornamental iron panels are perfectly sound. The failure is in the post, not the panel. We support the gate, remove the old post, set a new steel post in concrete, and re-weld the original hinges and panels to it. The gate keeps its original character and weight, and the post now has a footing that will hold. Call (469) 564-8046 and we’ll tell you if your specific gate qualifies.
Fixable, in nearly every case. Rendon’s unincorporated status means there were no setback or permit requirements governing how the original gate was installed, so T-posts driven into bare clay are common. The post leans, the gate sags, and it looks like the gate is ruined. We cut the post at grade, auger a 30-inch or deeper hole, set a properly sized steel post in concrete, and re-hang the gate. Plan on $450 to $850 depending on post size and soil conditions.
Because the gate itself is misaligned, and the operator is working against resistance it was never designed to overcome. Around Rendon, clay heave moves posts seasonally, and that movement transfers strain directly to the operator motor. When the gate drags, binds, or hits the stop crooked, the motor pulls more amps, overheats, and fails early. Replacing the operator without fixing the post or track will just burn out the next one. We address the structural problem first. Call (469) 564-8046 for an evaluation.
We can usually repair the existing rail. A crack near a joint is a fatigue failure, which means the weld was under stress for a long time before it failed. We grind out the crack, re-weld the joint with proper penetration, and often add a gusset plate to reinforce the area. This runs $180 to $400 and restores the rail’s strength without replacing the entire section. If the rail is rusted thin in multiple places, replacement becomes the better value, and we’ll show you why with measurements, not opinion.
You need them. Photocells detect a person, pet, or vehicle in the gate’s path and stop the gate from closing on it. Older gates in Rendon were often installed before automatic reverse became standard, and a gate without functioning photo eyes will close on whatever is in its way. This is a safety device, not an accessory, and it protects your family, your animals, and anyone delivering to your property. We install and align photocells as part of most Gate Access Control in Rendon repairs. Call (469) 564-8046 to have yours checked.
Call Ironworks Gate Co. in Rendon
Your gate is the first thing that has to work every time you leave or come home. When it doesn’t, you need someone who knows Rendon’s soil, Rendon’s older gates, and the specific ways this area’s properties fail. That’s us. Call (469) 564-8046 for a free estimate. A live person answers, day or night. We’ll get your gate right, and we’ll stand behind it in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rendon and the surrounding communities.