Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arlington
Most gate repairs in Arlington come down to one of two problems: the post moved or the operator quit. Arlington’s black clay soil is the culprit behind the first, and our Texas summers are hard on the second. We fix both, usually in a single visit. If your gate is dragging the ground, binding at the latch, or the motor runs but the gate won’t budge, call (469) 564-8046 and a live person will answer. We’ve been doing this work for over 42 years, and we know Arlington’s soil, its subdivisions, and the particular way gates fail here.
Why Ironworks Gate Co. Is Arlington’s Preferred Gate Repair Company
Arlington homeowners have a long memory when it comes to contractors. Many have lived in the same house since the late 1980s, and they remember the last repair that didn’t hold. We hear it often: a hinge was bent back into place, a latch was shimmed, and the gate failed again the next August. Victor Salinas started Ironworks Gate Co. with a simple standard: do the repair that fixes the root cause, not the symptom. In Arlington, that means understanding what the soil does to posts before we ever touch a hinge.
We dispatch crews to Arlington every day from our Dallas-Fort Worth office. A background-checked, uniformed technician arrives when we say they’ll arrive. The price is settled before any bolt is turned. And every job is covered by our 90-Day Done Right Promise, written down, no fine print, no arguing. If it isn’t right, we come back and make it right.
Our Gate Repair Services in Arlington
Hinge & Post Repair
This is the repair that separates a lasting gate from a repeat call in Arlington. The expansive clay under 76001, 76002, and 76003 swells after spring rains and shrinks through the summer. A post set in a shallow 1980s footing will heave out of plumb, and no hinge adjustment will hold for more than a season. We dig the post out, set it deeper, and pour a proper footing before reinstalling the hardware. In Arlington, a post repair typically runs $285 to $520 depending on post size and whether we’re replacing the post or resetting the existing one.
Gate Realignment
When an iron gate binds at the latch or drags the driveway, the frame has usually shifted. Sometimes it’s the post, sometimes it’s the gate itself sagging on worn hinges. We realign the gate to close square and true, then tighten or replace the hinge pins so it stays that way. Gate realignment in Arlington generally costs between $140 and $290, less if we’re already on-site for a hinge or operator repair. Our Gate Repair team handles realignment as part of most service calls rather than as a separate visit.
Electric Gate Repair
Arlington’s sustained 100°F+ summers are rough on gate electronics. Circuit boards overheat, capacitors swell, and thermal expansion binds the operator arm against the gate. We service the major automation brands, which means we diagnose the problem correctly the first time rather than swapping parts on a hunch. Electric gate repair in Arlington ranges from $175 for a simple limit-switch adjustment to $450 to $700 for a circuit board or motor replacement, parts included.
Automatic Gate Repair
When the motor hums but the gate doesn’t move, or the gate reverses for no reason, the operator needs attention. We carry common parts for Ghost Controls, DoorKing, Elite, and Mighty Mule operators in our service vehicles, so most automatic gate repairs in Arlington are completed on the first trip. Expect to pay $195 to $385 for a typical operator repair, though a full operator replacement on a heavy swing gate can reach $800 to $1,200.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
Our Gate Repair in Arlington customers run a mix of equipment, much of it installed when their homes were built. We’re trained on nine leading automation brands and carry parts for Ghost Controls, DoorKing, Elite, and Mighty Mule on the truck. If your opener is an older model and the manufacturer no longer supports it, we’ll tell you honestly and give you a straight quote on a replacement that fits your existing gate.
Common Gate Repair Problems We See in Arlington Homes
- Post heaving from black clay soil. Spring rains saturate the expansive clay, posts rise and tilt, and by August the gate drags the ground. The fix is resetting the post below the active clay zone, not bending the hinge back.
- Shallow 1980s-era footings. Homes in the 76001 and 76002 corridors were often built with gate post footings that never reached 24 inches. After 30 to 40 years of freeze-thaw cycles and soil movement, those posts are on borrowed time.
- Thermal expansion binding iron hardware. When the temperature climbs past 100°F, the metal in swing gates expands just enough to bind against the latch post. The gate works fine in the morning and jams by late afternoon.
- Ice load collapse in winter. North Texas ice storms, more common here on Arlington’s open western exposure than in Dallas proper, can coat lightweight aluminum and wood gates in ice. A quarter-inch of ice on a 16-foot gate adds hundreds of pounds of load.
Pricing for Gate Repair in Arlington, TX
Here are straight numbers for Arlington. Hinge and post repair runs $285 to $520. Gate realignment runs $140 to $290. Electric gate repair runs $175 to $700 depending on whether it’s a simple adjustment or a circuit board replacement. Automatic operator repair runs $195 to $385, with full operator replacement at $800 to $1,200. Every price is quoted and agreed before work starts. No surprises on the bill. We offer $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans get a permanent 5% discount. Call (469) 564-8046 for an exact quote, estimates are free.
We Also Serve Cities Near Arlington
If you’re in Kennedale, Mansfield, Fort Worth, or Burleson, we cover those communities as well. The soil and gate problems are similar across Tarrant County, and our crews are on the road throughout the area every week. Same team, same 90-Day Done Right Promise.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Arlington
Your gate post is heaving. Arlington sits on expansive black clay that swells when wet and shrinks when dry. A post set in a shallow footing rises during spring rains and settles unevenly through the summer, tilting the gate enough that it drags. The permanent fix is digging the post down below the active clay zone and setting it in a rebar-reinforced concrete footing. Call (469) 564-8046 and we’ll assess your footing depth and give you an exact quote.
At minimum 24 inches, but ideally 30 inches or more for a heavy swing gate. Arlington’s active clay zone extends roughly two feet down. Anything shallower than that will move with the seasons. We learned this the hard way years ago, and now every post we set goes deeper than code minimum. Our crew recently reset a heavy-duty swing gate off Sublett Road in the 76002 ZIP where the original 1980s post footing had heaved over an inch after a wet spring. We dug the hinge post down 30 inches, set it in a rebar-reinforced footing, and reinstalled the LiftMaster operator with new safety photocells. By August the gate was dragging the ground. Now it cycles smoothly even in drought.
Yes. Many properties on the southern and western edges of Arlington have long driveways where running conduit for a 120-volt line is impractical. Solar operators work well here because Arlington gets strong, consistent sun most of the year. We size the panel and battery to the gate weight and cycle frequency, so the opener runs reliably even through a stretch of overcast days. A solar gate opener installation on an Arlington acreage gate typically runs $1,200 to $2,400 including the panel, battery, operator, and installation.
Usually the safety loop detector is picking up a false signal, the photocells are misaligned, or the control board is failing. If the gate is near a busy road, passing metal objects can trigger a loop detector, especially if it wasn’t installed with the right sensitivity settings. We’ll diagnose it on-site. Call (469) 564-8046 and we’ll send a technician to check the loop detector, photocells, and board.
Yes. Current standards require entrapment protection on any automatic gate, typically photocells across the gate opening and a reversing mechanism that stops the gate if it meets resistance. Many older Arlington installations predate these requirements and lack proper protection. If your gate can push against a person or vehicle without reversing, it’s time for an upgrade. We install and calibrate photocells and reversing edges as part of any operator repair.
Call Ironworks Gate Co. for Gate Repair in Arlington
If your gate is dragging, binding, or the operator isn’t working, call (469) 564-8046. A live person answers 24 hours a day, 7 days a week. We’ll schedule a technician for Arlington, give you an upfront price, and stand behind the work with our 90-Day Done Right Promise. The company that makes a 40-year-old gate close like the day it was hung.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Arlington, TX and the surrounding Tarrant County communities.