Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Arlington
Gate post heaving out of plumb? Hinges sagging so the gate drags the August-dry ground? Our Gate Parts & Welding crews work throughout Arlington every week, replacing posts, rebuilding rails, and welding frames on gates that were installed when the subdivisions were still new. Most parts and welding jobs in Arlington are completed in one visit, with the price agreed before we turn a single bolt. Call (469) 564-8046 and a live person answers, day or night.
The difference in Arlington is the soil. That expansive black clay under 76001 and 76002 does not sit still. It swells after spring rain, then shrinks hard through the summer, and any gate post set shallow back in the 1980s gets lifted and tilted with it. We have been correcting those failures for years, and we know which repairs will hold and which ones will be back next season.
Why Ironworks Gate Co. Is Arlington’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has built its reputation across Arlington by doing gate work the way it should have been done the first time. Homeowners in neighborhoods off Matlock Road, Sublett Road, and across the 76001 and 76002 corridors know us for straight answers and work that stays fixed. Victor Salinas runs every job to the same standard: measure the steel, check the post depth, weld it square, and stand behind it in writing.
Our 90-Day Done Right Promise covers every parts and welding job in Arlington. If something is not right, we come back and make it right. No paperwork, no arguing. It is the same guarantee we have applied to thousands of gates, and it is why Arlington customers keep our number in their phone long after the first repair.
Our technicians are background-checked and uniformed, and they work on your driveway the way they would work at their own mother’s house. Dispatch comes from our Dallas-Fort Worth office, so a crew can be at your Arlington property quickly, often the same day for a heaving post or a broken hinge. Most jobs are completed in one visit.
Our Gate Parts & Welding Services in Arlington
Post Replacement
This is the core repair across Arlington, and it is almost always about footing depth. Gate posts set in the 1980s and early 1990s, common throughout the brick-ranch subdivisions of southern Arlington, were often buried only 16 to 18 inches. That never reached below the active clay zone. After a wet spring, the post heaves. By August, the gate drags. The lasting fix is augering a new footing 24 to 30 inches deep, setting a new steel post, and only then remounting the hinges and operator. A post replacement in Arlington typically runs $350 to $700 depending on post size and whether an operator must be removed and reinstalled.
Rail Repair
North Texas ice storms are hard on Arlington gates. Ice accumulates on long horizontal rails, and lightweight aluminum or wood gates bend or bow under the weight. If the damage is limited to one or two pickets or a single rail, we straighten and weld in place. If the frame is twisted, we cut the damaged section and weld in new material. Expect a rail repair on a typical Arlington driveway gate to run $180 to $380.
Custom Welding
For ornamental iron gates, custom welding means repairing scrollwork, rebuilding broken stiles, and fabricating reinforcement plates where years of Arlington heat have caused thermal fatigue. We weld mild steel and wrought iron on site, and we match your existing design so the repair disappears into the original gate. Custom welding work is quoted by the job after we see the gate. Most Arlington repairs fall between $150 and $450.
Hinge Replacement
Hinge pins seize in Arlington’s sustained 100°F-plus summers. The iron expands, the pin binds, and the operator starts straining against a hinge that no longer swings freely. We carry heavy-duty bearing hinges sized for ornamental iron and wood-privacy gates, and we replace hinge posts at the same time if the post has shifted. A standard hinge replacement on a residential Arlington gate runs $140 to $260 per hinge, including realignment.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
Arlington homeowners run every kind of operator on their gates, and we are trained and equipped on nine major automation brands. We regularly service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units across Arlington, including the solar-charged Ghost Controls and Mighty Mule setups common on acreage driveways. If you have an Elite or DoorKing slide operator on a long rural entrance, we keep the rack, pinion, and limit-switch parts on the truck so the repair happens in one visit. Parts are stocked locally for Arlington customers, which keeps turnaround tight.
Common Gate Parts & Welding Problems We See in Arlington Homes
- Post heave from expansive clay. Southern Arlington ZIPs sit on the same black clay that defines Tarrant County. A wet spring lifts shallow footings, and by August the gate is dragging. The repair is deeper footing, not a bigger hinge.
- Ice storm rail collapse. Arlington’s open western exposure makes ice storms hit harder than in central Dallas. Lightweight aluminum and wood gates bend under ice load, and the rails and hinge posts need welding or replacement.
- Thermal hinge seizure. Week after week of 100°F heat expands iron hardware. Hinge pins seize, gate operators strain, and the motor burns out trying to move a panel that no longer swings free.
- Undersized operators on wide spans. Long driveways and ranch entrances around Arlington’s southern edge often have gates that are heavier than the original operator was rated for. When the motor gives out, we often upgrade to a heavier-duty unit and weld a reinforced mount at the same time.
Pricing for Gate Parts & Welding in Arlington, TX
Here is what Arlington homeowners can expect to pay for common parts and welding work:
| Service | Typical Arlington Price |
|---|---|
| Hinge replacement | $140 - $260 per hinge |
| Post replacement (steel, 30-inch footing) | $350 - $700 |
| Rail repair (bent or broken) | $180 - $380 |
| Custom welding repair | $150 - $450 |
| Gate frame straightening (ice storm damage) | $225 - $500 |
| Rack and pinion kit install on existing slide gate | $280 - $600 |
Every price is quoted and agreed before any work begins. The number we give you is the number on the bill. We do not add material markups mid-job, and we do not leave a gate half-fixed waiting for approval. Call (469) 564-8046 for a free estimate, and bring your questions about the gate. We will tell you what it needs.
We Also Serve Cities Near Arlington
Beyond Arlington, our crews cover Kennedale, Mansfield, Fort Worth, and Burleson. If you are just over the line in any of those cities, the same rate structure applies and the same crews handle the call. Learn more about our Gate Parts & Welding in Arlington service area.
Why Deep Clay-Zone Post Footings Are the Real Repair in Arlington
Here is the part most gate companies in Arlington will not explain. When a gate post heaves and the gate starts dragging, the visible problem looks like a hinge or a sagging frame. But the post moved. The soil moved it. Arlington’s black clay expands when it takes on water, and it does not expand evenly. A post set 18 inches deep sits right in the middle of the active zone, so it lifts with the clay and tilts as the clay shrinks back in drought. The hinge is not the problem. The post is not the problem. The footing is the problem.
In 76001 and 76002, subdivisions off Sublett Road were built in the late 1970s through the 1990s. The gate posts those homes got were standard for the time: 16 to 18 inches deep, concrete pour right at the surface. That was fine on stable soil. It is not fine on Arlington clay. Fixing the gate properly means augering a new footing 24 to 30 inches down, below the active zone, setting a new steel post, and then rebuilding the hinge mounts. It costs more than bending a hinge back, but it is the difference between a repair that lasts six weeks and one that lasts twenty years.
Neighboring Fort Worth has different geology in places. Sandy loam drains faster and moves less. A Fort Worth crew might never see the post movement we see weekly in Arlington. When you call a company that does not work Arlington every day, you risk getting the Fort Worth fix: surface hardware work that ignores what the soil is doing underneath. We work Arlington every week, and we set posts for the clay.
A Real Arlington Repair: Sublett Road, 76002
Last August we reset a swing gate hinge post for a ranch-style home off Sublett Road in 76002. The original post had been set only 16 inches deep in 1987. After that spring’s rains it heaved a full inch and a half, and the gate dragged the ground by the time the homeowner called. We augered a new footing 30 inches deep, set a new steel post, rebuilt the hinge mounts, and reinstalled the original LiftMaster operator with a new rack and pinion. The gate has not sagged since. That is what the 90-Day Done Right Promise is for, and what Victor Salinas expects on every Arlington job.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Arlington
Because the new post was set at the same shallow depth as the old one. Arlington’s clay heaves and shrinks year-round, and any post less than 24 inches deep is living in the active zone. A proper reset means augering below the clay line and setting the post 30 inches or deeper before welding the hinges back on. Call (469) 564-8046 and we will tell you what depth your post needs.
In most cases, yes. We straighten bent rails, weld cracked sections, and fabricate replacement pickets to match the existing design. Full gate replacement is only necessary when the frame itself is twisted beyond straightening. We will quote the repair after seeing the gate, and the price is agreed before we start.
Yes. We install rack and pinion kits on existing slide gates throughout 76001 and 76002, and we do it in one visit. This is common on acreage driveways where the original opener used a chain drive that has stretched or slipped. A new rack and pinion puts clean power to the gate. Call (469) 564-8046 for a free estimate.
The wood frame itself cannot be welded, but the steel frame and hinge mounts can. If the gate has warped out of shape, we remove the wood panels, weld a new steel frame to square, and remount everything so it closes clean. If the warping is minor, we may only need to adjust the hinges. Either way, the price is set before work begins.
Solar openers work, but they have limits. Arlington’s long, hot summers are actually good for solar charging, but the panel must be sized for the opener’s draw, and the battery must be rated for sustained heat. We install and service Ghost Controls and Mighty Mule solar systems on Arlington acreage gates, and we size the panel to your gate’s actual load. Call (469) 564-8046 and we will spec it for you.
Arlington Gate Parts & Welding - Call Today
We set posts for the clay. We weld for the ice storms. We size operators for the heat. And we stand behind every job with the 90-Day Done Right Promise in writing, because Victor Salinas never signed off on a gate that was not right. If your Arlington gate is dragging, sagging, or seized, call (469) 564-8046. A live person answers, and your estimate is free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Arlington, TX. If a gate is wrong, we make it right. That is the whole guarantee.