Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Arlington
If your keypad has gone dead or your gate stopped reading remotes, you need a technician who understands Arlington’s specific conditions. Gate access control in Arlington is not a one-size-fits-all repair: our black clay soil shifts posts, our summers cook plastic internals, and many homes were built without conduit runs for automation. We align the post, wire it correctly, and stand behind the work in writing. Call (469) 564-8046 and a live person answers, 24/7, no voicemail tree.
Ironworks Gate Co. has been serving DFW for over 42 years, founded in 1984. Our Gate Access Control team handles keypads, remotes, phone entry, card readers, video intercoms, and smart access controllers across Arlington, including every ZIP from 76001 up through 76003. We show up when we say, quote the price before a single bolt comes out, and every job carries the 90-Day Done Right Promise, written down.
Why Ironworks Gate Co. Is Arlington’s Preferred Gate Access Control Company
Arlington homeowners have dealt with enough generalists. A handyman can splice a wire, but he cannot diagnose why a keypad mounted on a heaved post near Lake Arlington keeps losing its connection every August. Our technicians train on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we arrive in 76002 or 76001, we already know what builder-grade operators were common in the late-80s subdivisions and what fails first on them.
Victor Salinas leads every job with the same standard: the 400th keypad repair gets the same care as the first one. That is why our work is protected by the Keystone Standard, a written 90-day guarantee. If something is not right, we come back and make it right. No paperwork, no arguing. The price you approve before work starts is the price on the invoice.
When you call about a gate access issue in Arlington, a live person answers. Not an answering service. Not a callback queue. A person who can dispatch a uniformed, background-checked technician to your driveway, most jobs done in a single visit.
Our Gate Access Control Services in Arlington
These are the access systems Arlington homeowners ask about most, and how our local experience changes the work.
Keypad Entry
A keypad is the simplest access control there is, and the most exposed to Arlington weather. Most keypads in our market run $220 to $480 for supply, wiring, and programming. But in Arlington, a keypad mounted on a gate post seated in black clay can lose its alignment or its seal after a wet spring heaves the post. If the keypad is hardwired and the conduit is crushed or never existed, the fix costs more than the keypad itself. We check the post first, not last.
Remote Control
Basic remote programming and transmitter replacement in Arlington runs $90 to $160. If the receiver on the operator has failed, you are looking at $180 to $360 including parts and labor. When remotes stop working on a ghost system, the issue is often the operator’s internal receiver board, not the remote. We stock common transmitter and receiver parts for DoorKing, Elite, and Ghost Controls, specifically to avoid a second trip to your home in 76001.
Phone Entry
Phone entry systems that let you open the gate from a cell call run $380 to $900 installed, depending on whether we are replacing an existing unit or running new low-voltage wiring. In an Arlington subdivision, the hardest part is often the absence of a dedicated conduit from the house to the gate. Where a phone entry system was retrofitted onto an old manual gate, the wire may be stapled to the fence. That fails. We bury it properly in conduit and seal the penetration.
Card Reader
Card readers for subdivisions, HOA gates, or private drives in Arlington run $350 to $1,000 installed depending on reader type and access control board. These systems need a stable cabinet, a proper ground, and post footings that stay below the active clay zone. We service more card reader systems that failed because of a drifting post than because of a failed reader.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
We are certified and stocked on nine leading gate automation brands, including DoorKing, Elite, Ghost Controls, and Mighty Mule, the brands we most often find on Arlington driveways. Because we keep common parts in our DFW metro stock, we can often complete a repair the same day rather than waiting on a distributor. Whether your system is a builder-installed Ghost Controls slide operator or a DoorKing phone entry system on a gated subdivision in 76003, we service it.
Common Gate Access Control Problems We See in Arlington Homes
- Builder-grade operators with plastic gear housings. Two summers of 100°F-plus Arlington heat and the plastic strips. The keypad and remote still send a signal, the gate just cannot move. We replace the operator with a commercial-grade housing and metal gears on a correctly poured post.
- Shallow post footings from 1980s subdivisions. After a wet spring, the post heaves an inch. The keypad or card reader mount shifts out of level. The signal gets intermittent. Resetting the post 24-plus inches deep is the actual repair, not just re-angling the bracket.
- Missing conduit runs on retrofitted manual gates. A manual swing gate built in 1992 was never wired for a slide operator. The solar panel or exposed low-voltage wire that gets installed later fails after the first North Texas ice storm. We run dedicated conduit and seal every penetration.
- Safety photocell misalignment after storms. A post shifts, and the photo eyes no longer line up. The gate reverses randomly or stays locked. This is a soil problem before it is an electronics problem, and we fix the soil first.
Pricing for Gate Access Control in Arlington, TX
What you will pay in Arlington depends less on the brand and more on what is under the post. A simple keypad replacement in a stable post might run $220. A full smart access retrofit with a new controller, wiring, and post reset can run $1,000 or more. A phone entry system with conduit work typically lands between $480 and $900. We quote the full job before any work starts, and that quote is the price. No change orders, no surprise line items. We offer a free estimate and a free second opinion on any written estimate you have from another company. Senior and veteran homeowners always receive a 5% discount.
We Also Serve Cities Near Arlington
Our Arlington crews regularly work in Kennedale, Mansfield, Fort Worth, and Burleson. If you are outside the Arlington city limits but still in the DFW metro, call and ask; we likely cover you.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Arlington
Because the post it is mounted on moved. Wet spring soil swells and heaves the post; by August the clay shrinks and the post settles back, but not to the same place. The keypad’s internal contacts or the wiring connection shift just enough to break signal. The fix is resetting the post below the active clay zone, not replacing the keypad. Call (469) 564-8046 for an inspection, and we will tell you honestly whether the keypad is dead or the post is the problem.
Yes, in most cases. A smart controller replacement on an existing operator runs $280 to $520 installed in the 76001 area. The catch is the same one we have mentioned: if the original gate was installed manual and converted later, the wiring is likely exposed and ungrounded. We will inspect the power source, add a proper low-voltage conduit if needed, and mount the controller on a post we have verified is stable. Free measure and written price before any work starts.
Usually the heat, plus a direct sun exposure on a south-facing post. Sustained 100°F plus temperatures in Arlington overheat the intercom’s internal power supply, which shuts down until the unit cools. Relocating the unit to a shaded position and improving ventilation fixes it permanently. We also check that the wiring is not binding because the post has moved, which compounds the heat problem. Call for a free look; we will tell you if a relocation is enough or if a replacement is warranted.
It is a receiver or transmitter frequency problem. Older slide gate operators on Arlington subdivision gates share a limited set of DIP switch codes, and when temperatures swing, aged receivers drift off frequency and start receiving signals from nearby remotes. We re-flash or replace the receiver and reprogram your remotes to a unique code. This is a common call in the 76002 area where original 1990s builders used the same operator model across a whole street.
The ice likely shifted the post or damaged the loop detector wiring in the ground. A loop detector senses the metal mass of your car, but when the ground freezes and thaws around a shallow conduit, the wire can crack or the loop can lose its calibration. We test the loop, re-set or replace it, and re-level the gate operator on its post. Most jobs in Arlington for this issue are done in one visit, and we carry the common loop detector parts on the truck.
If your gate access system in Arlington is acting up, call (469) 564-8046 now. A live person answers, day or night, and we will schedule a time that works. Estimates are free, and every job is protected by the 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Arlington and the surrounding DFW metro.