Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Crowley
If your driveway gate in Crowley is sagging, dragging, or refusing to open, the fix usually comes down to two things: the right part and a weld that holds. Gate repair in Crowley typically runs $145-$380 for hinge and bracket work, while full post resets and custom welding jobs land between $400 and $1,800 depending on what’s failing. We’re Ironworks Gate Co., and we’ve been doing this work since 1984. Call (469) 564-8046 and you’ll get a live person on the line, day or night.
Crowley isn’t a one-style town. You’ve got ranch pipe gates on acreage lots along FM 1187 and ornamental iron gates in Deer Creek and other HOA subdivisions built in the 2000s. Often they’re on the same street. That mix means we show up ready for anything: a broken hinge on a 30-year-old tube steel gate, or a failed LiftMaster operator on a decorative swing gate that the HOA wants matched exactly. We know what you’re dealing with out here, because we fix it every week.
Why Ironworks Gate Co. Is Crowley’s Preferred Gate Parts & Welding Company
Most of our Crowley customers call us after a general handyman has already taken a shot and missed. That’s not a knock on the handyman. It’s an honest statement about what this work demands. A driveway gate in Crowley sits on Vertisol clay that heaves and contracts every season. We know to look for it and correct it, while someone driving in from a different county might not.
Our Gate Parts & Welding team is background-checked, uniformed, and trained on nine gate-automation brands, including LiftMaster, Ghost Controls, and FAAC. That matters in Crowley because the 2000s-era subdivisions now entering their first major hardware replacement cycle are full of operator-control boards, loop detectors, and keypad systems that have to be diagnosed correctly before any welding even starts. We carry the parts and the welders on the truck so most jobs are done in a single visit.
Victor Salinas founded this company to do the work right enough that you’d never have to call anyone else. That’s still the standard. Every job, in every neighborhood in Crowley, from Farmstead Road down to the newer communities off Main Street, gets the same 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. No arguing, no forms, no exceptions.
Key takeaways
- Victor Salinas has led Ironworks Gate Co. for over 42 years.
- Live phone support around the clock, every day. No voicemail trees.
- 90-Day Done Right Promise, written on every invoice.
- Background-checked, uniformed techs who show up when they say.
Our Gate Parts & Welding Services in Crowley
Hinge Replacement
A gate hinge that’s grinding or drooping in Crowley is rarely just a hinge. The post it’s bolted to has likely shifted in the clay. We replace the hinge with a heavier barrel or weld-on hinge when the weight demands it, but we also check the post for plumb before we tighten anything down. In HOA communities like Creekwood and Silo Mills, we match the hinge style and finish to the original so the architectural review board has nothing to flag.
Post Replacement
Post replacement in this part of Tarrant County is the single most common repair we do. Crowley’s shrink-swell soil pushes posts out of alignment every wet-dry cycle. We dig the old footing, set the new post deeper than the original, and use concrete poured with a bell-bottom flare when the soil conditions call for it. Most post replacements in Crowley run $450-$950 per post, including disposal of the old steel.
Rail Repair
A sagging gate in Crowley usually isn’t a bent rail. It’s a racked frame. We cut loose the old welds, square the frame with a magnetic level, and re-weld with a MIG setup that fuses hot enough to hold against the daily heaving of Wright’s Branch Road and the surrounding neighborhoods. When the rail is actually compromised, we sleeve it or replace the section and blend the finish to match.
Custom Welding
When a gate is cracked, the HOA says it has to match the original, and no prefabricated part exists, custom welding is the answer. We fabricate scrolls, pickets, hinge plates, and full frames to match existing ornamental ironwork in Crowley. We’ve matched eyebrow arches, spear tops, and flush-panel steel for dozens of homes in Deer Creek and the subdivisions along Risinger Road. A custom weld-and-match job in Crowley typically runs $250-$700 depending on size and detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crowley
We service and stock parts for the gate operators Crowley homeowners actually have on their driveways: DoorKing, Elite, Mighty Mule, and more. For those 2000s-era HOA communities, the big two we see the most are LiftMaster and FAAC. If your operator is clicking but the gate isn’t moving, give us a call. We carry replacement boards, limit switches, and keypad modules on the truck, so we’re not running back and forth across Tarrant County chasing parts.
Common Gate Parts & Welding Problems We See in Crowley Homes
- Hinge posts leaning after spring rains. Crowley’s clay soil expands hard in wet weather and contracts in summer heat. A post that was plumb in March can be leaning two inches in June, dragging the gate leaf and killing the operator’s motor.
- HOA-mandated finishes narrowing the fix. Many Crowley subdivisions require gates to match the community’s original style and color. A stock replacement hinge or a mismatched weld won’t pass. We match the finish, the material, and the profile.
- Shared entry system failures during ice storms. The Fort Worth corridor gets more winter ice than the Dallas side of DFW. Loop detectors and keypad controllers that get wet and freeze stop talking to the operator, locking out whole neighborhoods. We rewire, replace, and waterproof the control panel.
- Ranch pipe gates with no permit record. On Crowley’s rural edge, older properties often have pipe gates that predate any paperwork. If you’re selling or subdividing, the gate has to meet current code, and we do those full replacement and automation jobs regularly.
Pricing for Gate Parts & Welding in Crowley, TX
Here’s what you can expect to pay for common gate work in Crowley. Hinge replacement starts around $145 and tops out around $380 per hinge, depending on size and weight. Post replacement is typically $450-$950 per post. Rail straightening and re-welding runs $200-$600. Custom welding and frame repairs land in the $250-$700 range. Full replacement gates with operator start around $1,800 and go up with size, automation, and finish. The price you’re quoted is the price you pay. We settle that number before any work starts, face to face, and it’s written on the invoice.
We also keep our standing offers active in Crowley: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (469) 564-8046 and mention whichever applies to you.
We Also Serve Cities Near Crowley
Our Gate Parts & Welding in Crowley customers often ask if we cover the surrounding towns. We do. You’ll find us regularly working driveways in Burleson, Joshua, Kennedale, and Fort Worth. Same live answer, same written promise, same single-visit service.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Crowley
Yes, most Crowley HOA communities with ornamental or automatic gates require architectural review before any visible repair or replacement. In Deer Creek, Creekwood, and similar subdivisions, the management company typically wants a photo of the existing gate, a description of the proposed repair, and confirmation that the finish and profile will match. We handle that paperwork. Our crew coordinates with your management company before we weld, so the job passes final inspection the first time. Call (469) 564-8046 and we’ll walk you through what your HOA needs.
Because the post is moving. Crowley sits on Vertisol clay that shrinks and swells with moisture, and a hinge post that’s set in a shallow footing will tilt a little more every season. Tightening the hinge or welding the frame won’t fix a moving post. We reset the post deeper, sometimes with a wider bell-bottom footing, replace the hinge, and square the frame so the gate closes like it did the day it was hung. That’s the only correction that lasts more than one wet-dry cycle in this soil.
You can replace only the hinge, and we do it often. The catch is that the other hinges and the post they’re welded to have usually shifted too, so a single-hinge swap sometimes buys you a year instead of a decade. We’ll give you an honest assessment: if the frame and the other hinge barrels are still sound, we replace the one hinge and tune the rest. If the damage has spread, we say so and quote the larger repair before we touch anything. The call is yours, and estimates are free.
Three things, and we see all three in Crowley. The first is shade: heavy tree cover in older neighborhoods near the original town core starves the solar panel. The second is a gate that’s hard to move, and a dragging hinge or tilted post in clay soil will make the operator work three times as hard per cycle. The third is an aging battery from the early-2000s installs that’s simply done. We test the panel output, measure the cycle draw, and replace what’s actually failing rather than selling you a battery you don’t need.
Yes, but the path almost always goes through a full replacement rather than a repair. When a property near the rural-suburban transition off FM 1187 is sold or developed, the buyer’s lender or the local code office typically requires a documented, code-compliant automatic system. We replace the old pipe gate with a welded steel automatic gate, install the operator, and provide the documentation for your closing. It’s a job we handle regularly on Crowley’s fringe, and we’ll quote it free before any work starts. Call (469) 564-8046.
In the Deer Creek subdivision off FM 1187, our crew reset a tilted hinge post on a decorative steel swing gate that had gone out of plumb after spring rains expanded the clay soil. We replaced the failing gate operator with a LiftMaster unit, corrected the sag on the frame, and coordinated with the HOA’s management company to ensure the style and finish met their architectural approval standards before final inspection.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Crowley and the surrounding Tarrant County communities since 1984.