Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Burleson
Gate parts and welding in Burleson most often come down to this: the Blackland Prairie clay under your gate has moved, and now a hinge is bound, a latch won’t catch, or a weld has cracked. We see it constantly. A solid-wood swing gate that closed perfectly for fifteen years suddenly sags an inch at the latch side. A slide gate starts grinding against its track. A top rail pulls loose from the hinge post after one hard storm. Our Gate Parts & Welding crew works on these exact problems across Burleson every week, and in most cases we can have the gate re-hung, welded, and closing right in a single visit. Call (469) 564-8046 and a live person answers, any hour.
Why Ironworks Gate Co. Is Burleson’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. was founded in 1984, and for over 42 years we’ve built our name on a simple standard: fix it right, stand behind it in writing. Burleson homeowners deal with a very specific soil problem, and a crew that doesn’t know gumbo clay will replace a hinge and walk away, leaving the same sag to return by September. We don’t do that. Victor Salinas leads our team with a background in both welding craft and gate automation, and every technician who rolls into Burleson is background-checked and uniformed. We treat your driveway like it’s our own mother’s.
Burleson customers call us again because we tell them the truth about their gate. If a post footing from 1992 is the reason the new hinges won’t hold, we say so, and we quote the refooting before we touch the hinge. That’s the square deal. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Response time to Burleson is a priority, and we keep it simple. A live person answers the phone 24 hours a day, 7 days a week, never a voicemail tree. Our dispatch is coordinated from the Dallas-Fort Worth office, and we schedule crews into Burleson every week. For repair calls, most gates are back to working order in a single visit.
Our Gate Parts & Welding Services in Burleson
Here’s the part most general contractors won’t tell you: on Burleson clay, a hinge or weld repair is often only as good as the post it’s connected to. We handle the whole job, and we don’t short-cut the footing.
Hinge Replacement
When a hinge post set in the 1980s or early 1990s near Old Town Burleson has moved out of plumb, you can bolt on the heaviest hinge made and it’ll bind again within a season. We replace worn or bent hinges with heavy-duty rated hardware, but we also check the post itself. If the post is solid, we swap the hinge and re-align the gate in one visit. If the post has walked, we tell you before we start, and we quote the refooting work so the hinge repair actually lasts. Hinge replacement on a typical Burleson wooden swing gate runs $160 to $310, depending on gate weight and whether the post needs resetting.
Post Replacement
This is the service that separates a real gate company from a handyman in Burleson. The gumbo clay swells and shrinks enough in a single year to move a shallow-set post inches out of vertical. Near Old Town, we routinely find posts from the 1980s sitting in just a small concrete collar, nothing close to modern depth. We pull the old post, dig down to 36 inches, bell the base wider, set the new post in high-strength concrete, and plumb it dead level. A typical post replacement and refooting in Burleson runs $350 to $650, and that’s the fix that stops the cycle. The gate comes off, the post gets set, and the gate goes back on right.
Rail Repair
Wind load on a solid-wood swing gate is serious business in North Texas. A spring storm pushing against a full cedar infill gate puts enormous leverage on the top rail, especially out near the expanding subdivisions west of I-35W where new ornamental gates have little windbreak. We straighten or replace bent top rails and bottom rails, and we weld cracked joints back to full strength. Rail repair typically runs $180 to $380 in Burleson, depending on the material and how much of the frame is compromised.
Custom Welding
When a gate frame cracks at the corner or a hinge-mount plate tears off, off-the-shelf brackets won’t survive the next drought-to-rain cycle. Our welders fabricate reinforcement plates, sleeve cracked rails, and build custom hinge mounts to match the gate you already have. We’ve welded cracked ornamental iron after hail storms, rebuilt bent slide gate frames on the south side of town, and reinforced corner joints on 20-year-old cedar gates throughout Burleson. Custom welding and frame repair generally runs $220 to $500, quoted up front before any arc is struck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burleson
If your automated gate swings or slides, the brackets and welds around the motor and rack matter as much as the control board. Our crews are trained and equipped on nine gate-automation brands, including Ghost Controls, DoorKing, and Mighty Mule. We stock common rollers, hinge plates, latch parts, and bracket hardware for Burleson jobs, so we’re not sending a tech out, diagnosing the problem, then waiting a week for a part to ship. Most parts are on the truck. When a weld repair touches an automated gate, we re-align the track, rack, and sensors before we leave so the whole system runs without fighting its own hardware.
Common Gate Parts & Welding Problems We See in Burleson Homes
- Sagging swing gates that get worse every summer. The hinges look tight, but the post itself is drifting in the gumbo clay. Every dry August pulls moisture out of the ground, the clay shrinks, and the post leans a little further. The gate sags because the geometry is gone, not because the hinge is loose.
- Slide gate roller brackets that snap repeatedly. When a post shifts out of plumb, the rack and pinion misalign, and the operator drives the gate against its own track. The bracket welds take the punishment and fail. Replacing the bracket without fixing the post and the alignment just schedules the next break.
- Cracked welds at hinge plates and frame corners. Burleson’s springs bring wind, and a solid infill gate is like a sail. Saturated ground loosens the post, the wind catches the gate, and a weld that held for a decade gives out at the stress point. We weld it back and, where needed, plate the joint so it’s stronger than original.
- Bent operator arms after forced manual operation. When a power cut strands an automatic gate and someone forces it open without using the manual release, the operator arm takes the damage. We see this after every serious storm line that rolls through Burleson. The arm bends, the bracket twists, and sometimes the hinge post gets yanked too. The gate needs weld work and the operator needs re-alignment.
Pricing for Gate Parts & Welding in Burleson, TX
Here are honest numbers for the Burleson market, quoted in writing before we start:
- Hinge replacement, standard wooden swing gate: $160 to $310
- Post replacement with 36-inch refooting: $350 to $650
- Rail straightening or replacement: $180 to $380
- Custom welding and frame reinforcement: $220 to $500
- Slide gate roller bracket and alignment repair: $190 to $380
- Complete gate re-hang after storm damage: $400 to $900
What changes the price is mostly the post. If the post is solid, we’re swapping parts and re-aligning. If the post has to come out and be refooted to 36 inches, that’s the bigger chunk. You get the full price, written down, before any work begins. The bill you see at the end is the price we agreed on. We offer free estimates, a free second opinion on any written estimate from another company, and a standing $50 discount off any repair over $250. Seniors and veterans always get 5% off.
We Also Serve Cities Near Burleson
Our crews work across the southern DFW metro. If you’re in Crowley, Joshua, Alvarado, or Kennedale, we bring the same 90-Day Done Right Promise to your gate. We’re the Gate Parts & Welding in Burleson company your neighbors call when the clay starts pushing, and we’re glad to come a few miles down the road for the same reason.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Burleson
The safe procedure is to locate the manual release mechanism on your operator, disengage the motor from the gate, and move the gate slowly by hand with one person guiding each side so it doesn’t slam against the stops. Most Ghost Controls, DoorKing, and Mighty Mule openers have a clearly marked release lever or key. Never force a powered gate while the motor is still engaged; that’s how operator arms get bent and hinge posts get yanked. If you’re unsure where the release is, call (469) 564-8046 and we’ll walk you through it on the phone. A straightened arm and re-aligned operator after a forced opening usually runs $200 to $450 in Burleson, so it’s worth knowing your release before the next storm.
The hinges aren’t the problem; the post is. Burleson sits on Blackland Prairie gumbo clay that shrinks dramatically during the long dry summers and swells when the rains return. A post set in a shallow concrete collar from the 1980s or 1990s moves a little more each cycle, taking the gate with it. No hinge adjustment fixes a moving post. The remedy is pulling the post, digging a 36-inch footing with a belled base, and re-setting it in high-strength concrete before re-hanging the gate. That’s a $350 to $650 job in Burleson, and it’s the repair that breaks the cycle.
Yes, hail damages ornamental iron. North Texas hail can hit hard enough to dent and bow decorative scrollwork, crack decorative finials, and even crack welds at connection points. The gusts that accompany those storms also stress the gate frame. Wooden gates lose boards and get split rails; iron gates get dented and cracked. We weld cracked iron sections, straighten what’s worth straightening, replace what isn’t, and re-align the frame after every storm system. Repairs of that sort in Burleson typically fall between $200 and $500 depending on the extent of the damage.
Thirty-six inches, minimum, with a wider bell at the base and high-strength concrete. The clay in Burleson moves enough at shallow depths to walk a post out of plumb within two or three wet-dry cycles. Anything less and you’re redoing the job. We set every replacement post in Burleson to 36 inches. When we find an old post that’s still solid but leaning, it’s almost always sitting in a small collar of concrete from a 1980s install, nowhere near that depth. The difference between a 24-inch and a 36-inch footing is the difference between a gate that sags every August and one that closes true for decades.
It’s usually both. The clay moves the post, the post pulls the gate out of alignment, the operator pushes the gate hard against its own track, and the bracket weld snaps under the load. Welding the bracket back on without fixing the post and the alignment is a temporary fix. The right order is: refoot the post, re-align the rack and pinion, then weld the bracket back square and true. That complete job in Burleson typically runs $350 to $700. Call (469) 564-8046 for an exact quote; we’ll look at the post, the track, and the weld, and give you a written price before we start.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burleson and the surrounding communities. Ironworks has stood behind its work with the 90-Day Done Right Promise since 1984.