Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Alvarado
If your gate sags, drags, or won’t open, the cause in Alvarado is usually the ground under the post, not the hinge itself. Our crews repair and weld gate components on site across Johnson County, and most jobs on this side of I-35W get a technician out within one business day. Call (469) 564-8046 and you’ll reach a live person who can schedule the visit and quote the job before any work begins.
We are the Gate Parts & Welding team at Ironworks Gate Co., and we work on the heavy ornamental iron and pipe-rail gates that define the acreage properties along FM 917, County Road 604, and the ranchette subdivisions east of downtown. Alvarado’s black clay does things to gate posts that a crew from Fort Worth won’t always catch. We do.
Why Ironworks Gate Co. Is Alvarado’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has been standing behind gate repairs for over 42 years, founded in 1984 by a team that planned to still be answering the phone in another forty. Victor Salinas leads our Alvarado work, and he insists on the same standard on every job: the gate is right before we leave, and we put it in writing. The 90-Day Done Right Promise covers every weld, every hinge, every post we set. If it isn’t right, we come back and make it right. No arguing, no paperwork.
Homeowners out here between Keene and Grandview call us because they want a one-visit fix, a price agreed before we start, and a technician who checks the post before replacing parts that didn’t fail. Our Alvarado customers’ gates sit on Johnson County’s expansive clay, which behaves differently from the sandy loam you find closer to DFW. We account for that. The result is a repair that lasts years instead of seasons.
Scheduling is coordinated from our Dallas-Fort Worth office, and crews are dispatched to Alvarado daily. A live person answers every call, 24 hours a day, 7 days a week, so when a freeze seizes your gate at six in the morning on a workday, you aren’t routed through a phone tree.
Our Gate Parts & Welding Services in Alvarado
Hinge Replacement
Hinge welds crack at the post when Alvarado’s clay heaves and tilts the post a few degrees out of plumb. The leaf drops, the latch binds, and the operator strains against a gate it can no longer move. We cut out the old hinge tabs, weld in reinforced replacements, and re-hang the leaf so it swings level. On jobs where the post itself has moved, the hinge fix comes after the post is trued, not before.
Post Replacement
We check post plumb before diagnosing anything else on an Alvarado gate, because the soil here is the root cause of most recurring failures. A lean of even two inches torques hinge brackets and cooks operator drives. When we replace a post, we dig deeper than the original footing, bell out the base below the active clay layer, and pour concrete that won’t heave the same way. The post goes back dead level and stays there.
Rail Repair
Ornamental gates with welded pickets crack at the bottom rail over time, especially when the gate has been racking against a moving post. We cut out cracked sections, weld fresh mild steel in, grind the joints, and repaint to match. On heavy custom gates, we also check the top rail and every scroll joint, because a crack there will spread into the pickets by the next freeze-thaw cycle.
Custom Welding
Some gates are too damaged for a part swap. Or the property owner wants a gate reworked to accept a new opener, or an ornamental section rebuilt to match a 1990s-era design that no one stocks parts for. We fabricate on site from mild steel, weld in the missing sections, and finish to match. Alvarado’s acreage gates are often one-off fabrications, and a generic replacement part isn’t the right answer. A torch, a grinder, and a welder are.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alvarado
Our technicians are trained and equipped on nine gate-automation brands, including DoorKing, Elite, and Mighty Mule, so when a welded repair touches an opener, we fix the whole system in one visit. We arrive knowing the operator’s drive torque, the limit adjustment, and the failure points specific to that brand on a heavy ornamental gate. For Alvarado properties running Ghost Controls or LiftMaster, the repair stays a weld job, not a two-week saga of ordered parts and second trips.
We keep common hinge pins, gate rollers, rack, and latch housings on the truck, sized for the gates common out here. If a part isn’t in the truck, we pull it from our DFW stock and return fast.
Common Gate Parts & Welding Problems We See in Alvarado Homes
- Hinge welds cracked at the post. Seasonal clay heave tilts posts and torques hinge tabs until the weld cracks and the gate drops. We fix the hinge and the post together, so the crack doesn’t return after the next spring rain.
- Slide gates jumping track after storm winds. Spring microbursts along I-35W batter slide gates and bend the rack or snap rollers. We re-weld the rack, true the track, and replace rollers so the gate runs clean.
- Cast-aluminum latch housings seized from freeze-thaw. North Texas ice seeps into latch bodies, freezes, expands, and cracks the casting. The gate binds shut until the housing is replaced and the strike re-welded to match.
- Operator drives burned out on racked gates. A gate that drags forces the operator to work against the drive every cycle. The motor fails, but the repair that matters is the post or hinge correction underneath.
Pricing for Gate Parts & Welding in Alvarado, TX
Alvarado pricing runs close to the regional norm, but the clay-soil factor means some jobs here need a deeper post set than a comparable repair in Fort Worth would. A hinge replacement on a standard ornamental swing gate runs $260-$480 per gate leaf. A post replacement with a belled footing below the active clay layer runs $550-$1,100 depending on gate weight and concrete depth. Custom welding for a cracked rail or scroll work runs $180-$600, and gate roller replacement on a slide gate runs $140-$360. Every price is agreed before work starts, and a written estimate is free. Call (469) 564-8046 and we’ll quote your gate precisely.
We Also Serve Cities Near Alvarado
Ironworks Gate Co. runs crews daily through the Johnson County corridor. If your property is outside Alvarado proper, we cover Alvarado and the cities around it, including Keene, Burleson, Mansfield, and Cleburne. Same crew, same written guarantee, same one-visit standard.
Serving Alvarado, TX - Our Local Coverage Area
We’re based in the Alvarado area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Alvarado
The gate is racking because the post has moved, not because the hinge adjustment slipped. Alvarado sits on Blackland Prairie clay that swells with spring rain and shrinks in July heat, pulling posts out of plumb by inches. A hinge adjustment is temporary; the real fix is truing the post and replacing the footing below the active clay layer. Call (469) 564-8046 for an exact evaluation, free.
Most cracked ornamental gates can be welded in place, because we cut a V-notch into the crack, weld from both sides, and brace the gate before striking an arc. If the crack is at the hinge post from a torqued weld, we may lift the leaf to reset the hinges properly. We’ll tell you before work starts, and the price is fixed at that point.
High winds flex the gate, the track shifts, and the v-wheel rollers skate off and bend the rack. We re-laser the track, weld the rack sections back in line, and replace the rollers with heavier ones sized for the gate’s weight. The fix is permanent when the track reinstallation accounts for the gate’s wind load, not just its rolling weight.
Usually, yes. A two-inch lean will worsen by another inch or two in the next freeze-thaw cycle, and the operator is already working against the misalignment. The post can sometimes be jacked and re-set, but in Alvarado’s clay the reliable repair is a new, deeper-belled footing below the active heave zone, then a re-hung leaf. We’ll quote the full job before work starts.
The operator burns out because it’s fighting a gate that doesn’t swing true. We square the gate and post, replace worn hinges and rollers, and set the operator’s limits and torque to match the gate’s actual weight. Proper welding and post work is better heat protection for an opener than any shade cover. Estimates are free: call (469) 564-8046.
If your gate in Alvarado needs welding, a new post, or hinges that won’t crack in two seasons, call us today at (469) 564-8046. You’ll get a live person, a straight answer, and a price that doesn’t move after we start. A square deal, done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Alvarado with gate parts and welding expertise since 1984.