Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Everman
Gate parts and welding calls in Everman usually come down to one thing: the soil has moved and the metal hasn’t kept up. We work on hinge replacements, post resets, rail repairs, and custom welding for chain-link swing gates and steel tube frames throughout Everman, and we know the Houston Black clay here well enough to fix the footing problem first, not just the symptom. If your gate is binding, dragging, or refusing to latch, call (469) 564-8046 and we’ll send a background-checked technician from our Dallas-Fort Worth office to your house, usually the same day.
Key Takeaways:
- Most Everman gate failures trace back to shallow 1970s post footings failing in Blackland Prairie clay, not to bad hardware.
- We reset posts in deeper, wider footings before welding new hardware, so the fix holds through wet and dry cycles.
- Every job carries the 90-Day Done Right Promise in writing, and a live person answers the phone 24/7.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Parts & Welding Company
Homeowners around Everman call us because we show up knowing what the soil has already done to the gate. It’s a small city wrapped inside Fort Worth, and the housing stock tells the story: ranch-style homes from the 1960s and 1970s, chain-link and basic ornamental iron gates, and post footings that were marginal on day one and have spent fifty years getting worked by clay that swells when it rains and shrinks when it doesn’t. Our crews serve Everman locally, and we’ve handled enough Enon Avenue and Judy Lane properties to know which gates were set shallow and which ones were built to take the weather.
Victor Salinas founded this company in 1984 on a simple rule: the 400th job gets the same care as the first. That means a written 90-Day Done Right Promise on every gate we touch, no paperwork, no arguing. We’re not the lowest bid in Everman. We’re the company you call after the low bid fails, and we’ve spent 42 years being that company. Background-checked, uniformed technicians, upfront pricing agreed before a single bolt gets turned, and a live person on the phone at 2 a.m. if that’s when your gate finally gives up.
Our Gate Parts & Welding Services in Everman
Hinge Replacement
On a 1970s chain-link gate off Enon Avenue, a hinge that looks worn often isn’t. The hinge post has crept toward the latch post, the gate frame has twisted, and the hinge is just the first part to complain. We replace Everman hinges with heavier barrel or weld-on hinges, and we check the post plumb before we touch the hardware. A new hinge on a leaning post will fail again in a season.
Post Replacement
This is the bread-and-butter call in Everman. Posts originally set 18 to 24 inches deep in Houston Black clay have spent decades rocking through wet and dry cycles, and now the gate binds or the latch won’t catch. We pull the old post, auger a 36-inch footing with rebar, set the new post in concrete, and remount the gate so it swings clean. That’s the fix that holds. Replacing the hardware without fixing the post is money thrown at the problem.
Rail Repair
Top and bottom rails on chain-link gates take the load every time the gate swings, and in Everman’s summer heat, unpainted steel weakens and rusts where the rail meets the post. We cut out the bad section, weld in new rail, and reinforce the corner brackets. If the frame has racked from a sagging hinge post, we straighten and weld the frame square before it gets worse.
Custom Welding
Not every Everman gate needs a part from a catalog. For farm gates on the acreage east of town, for steel tube frames that were built to fit a specific opening, and for operator brackets on wide driveways, we weld what the gate needs. On a long driveway off Enon Avenue, our crew pulled a 16-foot chain-link swing gate that had been binding at the latch post. The hinge post had been set only 20 inches deep in 1974, and decades of clay movement had rocked it toward the latch. We pulled the post, augered a new 36-inch footing with rebar, welded a new hinge post sleeve, and remounted the original gate so it swings clean without any sag correction hardware. That’s the difference between parts replacement and a repair that stays fixed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
When an Everman gate has an opener, it’s usually a Ghost Controls, DoorKing, or Mighty Mule unit bolted to an older chain-link or tube frame. We stock common brackets, hinges, and roller parts for those brands on our trucks, so most jobs finish in one visit. We’re trained and equipped on nine major gate-automation brands, which means the bracket we weld onto your farm gate for a solar opener will match the operator, not fight it. And if the operator is fine but the gate steel isn’t, we’ll tell you that plainly and weld what needs welding instead of selling you a part you don’t need.
Common Gate Parts & Welding Problems We See in Everman Homes
- Leaning latch posts on 1970s chain-link fences. The post was set 18 to 24 inches deep in clay, and after fifty years it has crept toward the gate. New hardware won’t fix it. A reset post will.
- Rust-weakened hinge welds on steel tube frames. A hundred-degree Texas summer bakes unprotected steel, and the first place it fails is the weld at the hinge. We cut out the rust, weld in new steel, and coat it.
- Sagging farm gates on rural acreage east of Everman. Wide gates without heavy-duty operators put constant strain on the hinge post. When the post shifts, the gate racks and the wheels drag. We straighten, reinforce, and remount.
- Solar openers bolted to inadequate frames. Homeowners add a solar operator to a wide farm gate without upgrading the hinge posts. The opener pushes, the post moves, and the gate sags into the ground. We weld a proper operator bracket and reset the post so the opener does its job.
Pricing for Gate Parts & Welding in Everman, TX
A hinge replacement on a standard Everman chain-link gate typically runs $120 to $240, including the new hinges and labor. Post replacement is the bigger job, because it’s the one that matters: $280 to $520 for a single gate post reset in a new 36-inch concrete footing, depending on post size and how much digging the clay demands. Rail repair usually falls between $100 and $200. Custom welding work, like fabricating an operator bracket or reinforcing a sagging frame, runs $85 to $180 per hour, and we’ll give you a written price before the torch comes out.
| Service | Typical Everman Range |
|---|---|
| Hinge replacement (chain-link or tube frame) | $120 - $240 |
| Post reset with new 36″ footing | $280 - $520 |
| Rail repair | $100 - $200 |
| Custom welding / fabrication | $85 - $180 per hour |
The price is quoted and agreed in writing before any work starts. What you’re told is what you pay. Call (469) 564-8046 for a free estimate and we’ll come measure the gate, look at the footing, and give you a number that holds.
We Also Serve Cities Near Everman
Our crews run Gate Parts & Welding work throughout southern Tarrant County and Johnson County. You’ll see our trucks regularly in Everman, but we handle the same hinge, post, and weld repairs for homeowners in Burleson, Alvarado, Crowley, and Joshua. Dispatch runs from our Dallas-Fort Worth office, so the drive is short and the response is quick.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Everman
Because the hinge post is moving in its footing, not because the hinge bolts are backing out. In Everman’s Houston Black clay, a post set 18 to 24 inches deep in the 1970s will rock through every wet-dry cycle, and every movement loosens the hinge hardware a little more. The permanent fix is resetting the post in a deeper, wider footing, then remounting the hinge. Tightening the bolts alone will buy you a few weeks. Call (469) 564-8046 and we’ll look at the post before you spend another dollar on hardware.
Yes, and it’s one of the most common welding jobs we do on Everman acreage. We grind the gate frame clean, position the bracket for the operator’s travel, and weld it so the opener pushes against steel, not thin tube. If the hinge post isn’t solid enough for the operator’s load, we’ll tell you before we weld the bracket, because a strong bracket on a weak post just moves the failure point. Estimates are free.
Usually just welding, plus a post reset. When the clay swells after rain, the hinge post heaves and throws the gate out of square, which drops the latch end onto the ground. We realign the frame, weld any cracked joints at the hinge corners, and reset the post so the next rain doesn’t undo the work. A new gate on the same bad post will drag within a season. Call us first and we’ll give you an honest read.
Yes. On automated farm gates and wide driveway gates, we weld the brackets for photocells and install loop detectors so the operator stops and reverses instead of pushing against a vehicle or a person. The safety edge and photocell work gets done the same day as the welding, and every job carries the 90-Day Done Right Promise. Call (469) 564-8046 for an exact price on your gate.
Pull the post and reset it, then address the latch. A leaning latch post means the hinge post has likely moved too, so we check both before we set new concrete. We auger a 36-inch hole, tie in rebar, set the post plumb, and remount the gate and latch so the catch engages cleanly. Bolting a new latch to a leaning post just moves the problem six inches. That’s the Everman fix, and we do it routinely.
If your gate is binding, dragging, or latching only when the weather cooperates, call Ironworks Gate Co. at (469) 564-8046. We’ll send a technician who knows Everman soil, Everman gates, and how to fix the footing so the parts last. Free estimates, written prices, and a live person on the phone 24 hours a day. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman since 1984.