Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Everman
Gate installation in Everman, TX runs $1,400 to $6,800 for most driveway and pedestrian gates, depending on width, material, and whether you want automation. A basic steel tube swing gate starts around $1,400, while a heavy double driveway gate with a solar opener lands between $4,500 and $6,800. We serve Everman from our Dallas-Fort Worth office, and our crews know this town’s clay soil, 1960s tract lots, and long ranch driveways better than any team that just passes through. Call (469) 564-8046 and you’ll reach a live person who can schedule a free measure and written estimate, not a voicemail.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Installation Company
We’ve been building, welding, and automating gates for over 42 years, since 1984. Everman homeowners call us because the original gate on a 1970s ranch house is almost always fighting the same battle: Houston Black clay pushing posts out of plumb year after year. Our crews have reset enough of those old posts to know exactly what’s happening underground before we ever touch a hinge. Victor Salinas leads our team with a simple standing rule: a gate that isn’t square isn’t done.
Every Everman job is backed by our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing. We also send background-checked, uniformed technicians who treat your property the way they’d treat their own mother’s. And when you call, a live person answers 24 hours a day, 7 days a week. No phone trees.
Everman customers choose us because we give a square deal: the price is quoted and agreed before any work starts. You’ll know the number before a single bolt is turned. That matters in a town where people remember the last contractor who surprised them with a bigger bill than the handshake.
Our Gate Installation Services in Everman
Driveway Gates
A driveway gate in Everman does double duty: it secures the property and stands up to 50 years of soil movement that lesser installations won’t survive. We build steel tube frame gates sized to your opening, set posts deep enough for the clay, and hard-wire or solar-power automation as needed. Most driveway gate installs run $2,200 to $5,800 in Everman, depending on width and opener selection.
Pedestrian Gates
For side yards and walk-through entries, we install pedestrian gates that match your fence line and latch correctly from day one. In Everman’s older ranch neighborhoods, the walk gate is often the first one to bind because it’s hung on the same 18-inch-deep post that’s been moving for five decades. We set it right so you don’t have to shoulder it open.
Sliding Gates
Sliding gates fit Everman properties where the driveway has no room for a gate to swing inward or outward, or where the driveway slopes toward the street. A sliding gate rides on a track or cantilever system and holds up better than a swing gate when the ground shifts, because the post isn’t carrying the full weight of a pivoting leaf. Plan on $3,000 to $7,500 for a sliding gate installation in Everman.
Swing Gates
Single and double swing gates are the most common style in Everman, especially on the ranch-style lots built between the 1960s and 1980s. We build swing gates with reinforced frames and anti-sag kits so a 12-foot or 14-foot leaf doesn’t droop and drag within two years. On Gate Installation projects across Everman, we always address the post before the panel, because the post is what fails first here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
We’re trained and equipped on nine gate-automation brands, including Ghost Controls, DoorKing, and Elite. That means when an Everman homeowner has an existing opener on the fender or a keypad already wired, we don’t have to rip it out and start over unless it’s truly dead. We diagnose what’s there, quote the fix or replacement honestly, and stock common parts for the brands we service so most Everman jobs finish in one visit. Solar, AC, battery backup, keypads, safety sensors, remotes: we handle the full system, whatever the nameplate says.
Common Gate Installation Problems We See in Everman Homes
- Posts set too shallow for the clay. The original gate posts on most Everman homes were set 18 to 24 inches deep with minimal concrete. After 50 years of Houston Black clay shrink-swell, those posts rock and lean, and any new gate hung on them will bind. We set new posts 42 inches deep with rebar and gravel drainage so the gate stays true through wet and dry cycles.
- New gates sagging within the first year. A swing gate that drags six months after installation usually means the post footing wasn’t deep enough, or the gate was built without an anti-sag kit. In Everman’s clay, the post heaves, the latch side drops, and the gate starts scraping. We correct both: reset the post, then rebuild the gate with a diagonal brace or cable truss.
- Solar openers that can’t handle a wide gate. On long Everman driveways with no AC power at the gate, homeowners sometimes buy a solar kit rated for a light gate, then hang it on a 14-foot double farm gate. The motor stalls, the battery drains, and the gate won’t open in the morning. We size solar systems for the actual gate weight and cycle count, not the box’s marketing claim.
- Livestock pressure bending tube frames. Where animals push against a gate, a basic 1-5/8-inch tube frame folds. We build with heavier-gauge steel, add a bottom rail and mid-rail, and weld corner gussets so the gate holds its shape under pressure instead of twisting the hinge posts.
Pricing for Gate Installation in Everman, TX
A complete new gate in Everman, installed with posts set properly for our soil, runs roughly:
- Pedestrian gate, steel tube frame: $1,400 to $2,600
- Single driveway swing gate, no automation: $2,200 to $4,000
- Double driveway swing gate, no automation: $3,500 to $5,800
- Double gate with solar automation and safety sensors: $4,500 to $6,800
- Sliding gate, cantilever or track: $3,000 to $7,500
What moves the number: gate width and height, steel gauge, whether we’re replacing posts or setting new ones, and the opener you choose. We quote everything in writing before work begins, and the price we quote is the price you pay. Estimates are free. Call (469) 564-8046 and Victor or one of our crew leads will come measure your opening and hand you a written number.
We Also Serve Cities Near Everman
Our crews work across Tarrant County and the surrounding area. If you’re in Burleson, Alvarado, Crowley, or Joshua, we schedule Gate Installation in Everman and the nearby towns on the same routes, so you get the same fast scheduling and the same written 90-Day Done Right Promise. Call us and we’ll tell you which day we’re in your area.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Everman
Gate posts in Everman should be set 36 to 42 inches deep, with rebar-reinforced concrete and a few inches of gravel at the base for drainage. The original posts on most 1960s and 1970s homes here were set 18 to 24 inches deep, which is exactly why so many gates in this town lean and bind. Deeper footings get below the worst of the Houston Black clay movement. Call (469) 564-8046 to have us look at your current posts before you hang a new gate on them.
Yes, if the system is sized correctly for the gate’s weight and how often it cycles. We install solar openers from Ghost Controls, Elite, DoorKing, and others on Everman driveways that run hundreds of feet with no AC power at the gate. The mistake is buying an underpowered kit rated for a light backyard gate and bolting it to a heavy double farm gate. We calculate panel wattage, battery reserve, and cycle count before we quote. Call (469) 564-8046 and we’ll spec the right system for your actual gate.
If a newly installed swing gate sags within the first year in Everman, the hinge post was almost certainly set too shallow for the clay, or the gate was built without an anti-sag diagonal. Houston Black clay heaves with rain and contracts in drought, and that movement rocks a shallow post until the latch side drops. The fix is resetting the post deeper and adding a turnbuckle cable or welded diagonal brace. We do that work every week in this town.
Yes. Any automated gate in Texas should have entrapment protection: at minimum a photocell sensor across the opening, and ideally contact edges on the gate leaf. This applies to farm and ranch gates too, not just residential driveway gates. We install safety sensors on every automated gate we put in around Everman, including solar systems on rural acreage. Call us at (469) 564-8046 and we’ll explain what your specific gate needs to meet UL 325 safety standards.
A wide double gate needs an operator with enough duty cycle and pull force for the total gate weight, not just the width. For 14-foot and wider double gates in Everman, we typically specify heavy-duty swing arm operators from DoorKing or Elite, or a linear ram system with battery backup. The opener has to push against wind load and the slight frame flex that every wide gate has. We match the operator to your gate’s measured weight and width, install the safety sensors, and program the travel limits so both leaves close square. Call (469) 564-8046 for a written quote on the right opener for your gate.
Key Takeaways for Everman Homeowners:
- Gate posts in Everman must be set 36 to 42 inches deep, not 18 to 24 inches, or the clay will move them within a year.
- Solar openers work on long rural driveways here, but only when sized for the actual gate weight.
- Every automated gate needs entrapment protection, including farm gates on acreage.
- You always get a written quote before work starts, and a 90-Day Done Right Promise after.
If your gate drags, binds, or just looks worn out, call Ironworks Gate Co. at (469) 564-8046. Victor Salinas and our Everman crew will measure your opening, talk through what’s actually wrong, and give you a written estimate for a gate that’s done right and backed in writing. Free estimates. A live person answers 24/7.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman and surrounding Tarrant County communities since 1984.