Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Cleburne
Gate parts and welding in Cleburne usually come down to one of three problems: a post that has heaved out of plumb in the black clay, a hinge that is tired and worn, or a weld that finally let go. Our Gate Parts & Welding team handles all three, and most jobs are done in a single visit. If you live anywhere in the 76031 or 76033 ZIP codes and your gate is dragging, sagging, or refusing to latch, call us at (469) 564-8046. A live person answers, day or night, and we will tell you straight what it will take to fix it.
Why Ironworks Gate Co. Is Cleburne’s Preferred Gate Parts & Welding Company
We have worked on gates all over Cleburne, from the Victorian and craftsman homes near the historic downtown to the ranch properties off Farm Road 4 and the newer subdivisions pushing south toward the 76033 corridor. That range matters. A wrought-iron pedestrian gate on a downtown Cleburne home built in 1910 needs a different hand than a schedule-40 pipe gate on a ranch easement. We know both, and we do not send a technician who has to figure it out on your dime.
Every call from Cleburne goes to a live person, 24 hours a day, seven days a week. That is not a call center in another state. It is our team, and they can schedule a background-checked, uniformed technician for your address, usually within one business day for non-emergency work. Victor Salinas has built this company on the idea that a gate job is only done when the homeowner stops thinking about it. Our written 90-Day Done Right Promise backs that up on every single job, no paperwork, no arguing.
Cleburne homeowners tell us the same thing over and over: they called a generalist before, paid for a fix, and six months later the gate sagged again. That is exactly what our Keystone Standard is designed to prevent. We quote the price before any work starts, you approve it before a single bolt is turned, and if it is not right within 90 days, we come back and make it right.
Our Gate Parts & Welding Services in Cleburne
Hinge Replacement
Hinges carry the entire weight of the gate panel, and in Cleburne they fail in a predictable pattern. The expansive clay under your posts moves with every wet-dry cycle, and that movement transfers straight into the hinge barrels. We regularly see hinge pins that have worn oval, barrel welds that have cracked, and hinge plates that have pulled loose from wooden posts on the older homes near downtown. We cut out the old hinge, weld or bolt in a properly aligned replacement, and set the gate so it swings and latches without dragging. Hinge replacement on a typical Cleburne residential gate runs $185 to $420 per hinge, depending on gate weight and post condition.
Post Replacement
This is the core repair we perform in Cleburne, and the black clay is the reason. Driven pipe and T-posts can move out of plumb by inches in a single season, which is a failure pattern you will not see to this degree in neighboring Burleson or Midlothian because the soils are different. When a post heaves, the whole gate system goes with it: the latch misses, the panel drags, the operator strains. We pull the old post, set a new one in a deeper concrete footing with proper drainage, and re-hang the gate so it is square and true. A post replacement with a standard steel post in Cleburne typically runs $350 to $750, including concrete and re-hang. Heavy ranch gate posts or posts in tight easements with poor access run higher.
Rail Repair
Rails are the horizontal members that hold the gate panel together, and on a steel or iron gate in Cleburne they fail in two ways: rust and stress. Older ornamental iron gates near downtown Cleburne have been through decades of North Texas weather, and rust attacks the rail joints first. On newer ranch gates, the constant flexing from wind and soil movement can crack the rail-to-stile welds. We cut out the bad section, weld in a new rail section or full replacement rail, and clean up the weld so it holds under load. Rail repair on a standard residential gate runs $150 to $400; a full rail replacement on a heavy ranch gate can run $500 to $900.
Custom Welding
Not every fix is a simple swap. When a gate has been hit by a vehicle, when a post has shifted so far that stock parts will not work, or when a homeowner wants a modification such as adding a diagonal gusset, a latch plate, or a drop bar receiver, we weld it. On a ranch off Farm Road 4 near the 76033 line, our crew found a 16-foot tube gate dragging hard after spring rains. The driven pipe hinge post had heaved more than two inches, twisting every weld point and pulling the gate off its latch. We reset the hinge post with a deeper concrete footing, then rewelded the hinge barrels and added a diagonal gusset at the sag correction point to stop the rail from dropping again. That kind of custom work is routine for us here. Custom welding on a gate in Cleburne runs $120 to $350 per weld point, depending on material thickness and access.
Trusted Brands We Service in Cleburne
When your gate has an operator, the brand on the motor matters. Our technicians are trained and equipped on nine major automation brands, and in Cleburne we most often see Ghost Controls, DoorKing, and Elite on residential driveways, with Mighty Mule common on ranch and acreage properties. We carry common parts for these systems on the truck, so the technician who shows up at your Cleburne driveway is not there to diagnose and leave. They are there to fix it, same visit, no second trip if the right part is on hand. If a part has to be ordered, we tell you that before any work begins, and we give you the real timeline.
Common Gate Parts & Welding Problems We See in Cleburne Homes
- Expansive black clay wracking driven pipe and T-post hinge posts. Cleburne sits squarely on the Blackland Prairie, and the clay here expands and contracts more aggressively than almost any soil in North Texas. A post that was plumb in March can be leaning two inches by June, and every weld point takes that stress. This is the number one reason Cleburne gates sag and drag.
- Shared driveways and rights-of-way forcing gates into narrow easements. Many Cleburne properties, especially older lots and ranch easements, share driveway access with a neighbor. That means the gate has to fit in a space where a swing arc will not clear, so a slide gate is the only option. Slide gate rack and pinion wear shows up faster here than on a wide suburban driveway, and we see more broken rollers and worn racks in Cleburne than in any other town we serve.
- Older downtown craftsman properties with tired wrought-iron gates. The homes near downtown Cleburne, some of them 100 years old or more, still have original or early wrought-iron gates. The hinge pins rust through, the latch hardware gets sloppy, and the working space between the house and the fence is often tight enough that a big welding rig will not fit. We send technicians who know how to work in those conditions, and we bring the smaller equipment when the job calls for it.
- Ice storm damage cracking operator housings and snapping stressed welds. Cleburne catches ice storms more reliably than the DFW core, and a single hard freeze is enough to crack an automated gate operator housing that was already under strain from post movement. A weld that has been flexing for months can fail outright when ice adds weight to the gate panel. After a freeze, check your gate before you hit the opener button, and call us if you see cracks or hear popping.
Pricing for Gate Parts & Welding in Cleburne, TX
Here are the numbers we quote to Cleburne homeowners, in writing, before any work starts. Hinge replacement: $185 to $420 per hinge. Post replacement: $350 to $750 for a standard residential post. Rail repair: $150 to $400 for a repair, $500 to $900 for a full rail replacement on a heavy gate. Custom welding: $120 to $350 per weld point. These are honest ranges for the Cleburne market, not starting prices designed to get a technician on your driveway. What moves the number is gate weight, post depth and condition, and access. A gate in a tight easement with no room for equipment costs more to work on than a gate with open access. A 16-foot schedule-40 ranch gate with a heaving post costs more than a 6-foot pedestrian gate. You will know the exact price before we turn a single bolt. Estimates are free, and for seniors and veterans we offer a permanent 5% discount. We also offer $50 off any repair over $250 and a free second opinion on any written estimate from another company.
We Also Serve Cities Near Cleburne
Ironworks Gate Co. serves all of Cleburne, and we also handle gate parts and welding in Keene, Joshua, Alvarado, and Burleson. If you are just outside the city limits, on a ranch road or in a new subdivision, you are still in our service area. Dispatch is coordinated from our Dallas-Fort Worth office, and our crews serve Cleburne locally.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Cleburne
Check your posts every spring and every fall, minimum. Cleburne’s Blackland Prairie clay moves more than almost any soil in North Texas, and a driven pipe post can be out of plumb by two inches after a single wet-dry cycle. Look for a gate that drags, a latch that misses, or a post that is visibly leaning. Catching it early means a post re-set instead of a broken weld or a snapped hinge. When you see movement, call (469) 564-8046 and we will come out and tell you what needs to happen.
Yes. We work in the gate’s footprint, and we keep the right of way passable for your neighbor during the job. On shared driveways we typically pull the gate panel off its hinges and work on the posts and hinges in place, which means no equipment sprawled across the easement. If a weld needs to be done on the panel itself, we do it with the panel set aside out of the travel path. Your neighbor keeps access, and we tell you exactly what we are doing and when. Call (469) 564-8046 for a free estimate on a shared driveway gate.
We repair them, and we replace them when the metal is too far gone to save. The wrought-iron gates on Cleburne’s oldest homes, the Victorian and craftsman properties near downtown, are often repairable with new hinge pins, fresh welds at the rail joints, and proper latch hardware. If the metal itself is rusted through in too many places, we can fabricate a replacement that matches the original style. Tight working space is normal on these jobs, and we bring the smaller welding rig when the access calls for it.
The post is usually the culprit, not the panel. Cleburne’s expansive clay pushes gate posts out of plumb, and a leaning post makes a straight gate sag, drag, and miss its latch. The panel can look perfectly straight while the whole assembly is geometrically wrong. We check post plumb first, because fixing a sagging gate without fixing the post is a temporary patch. Call (469) 564-8046 and we will check yours.
The operator housing cracks because the gate itself is binding, usually from post movement in the clay, and the motor keeps pushing against the resistance until something gives. Ice adds weight to the gate panel, and the combination of a binding gate, extra ice weight, and a cold, brittle plastic housing means a crack or a split housing. If your operator is cracked, the fix is a new housing or a new operator, plus correcting the binding so it does not happen again. Call (469) 564-8046 and we will diagnose it and quote you the fix before any work starts.
Contact Ironworks Gate Co. in Cleburne
If your gate is sagging, dragging, or refusing to latch, call us at (469) 564-8046. We will answer. We will give you a straight answer about what is wrong, what it costs, and when we can be there. The price is quoted and agreed before any work begins, and every job is backed by our written 90-Day Done Right Promise. A live person answers 24 hours a day, seven days a week. That is the way Victor Salinas has run this company from the start, and that is the way it stays.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Cleburne homeowners with gate parts and welding expertise for over 42 years.