Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Keene
Gate parts and welding in Keene usually comes down to two things: a post that has moved in the black clay, or a weld that has finally let go. The fix is rarely as simple as tightening a hinge. In Keene, where ranch-style pipe gates and long driveways are the norm, most problems trace back to the soil under the post or fatigue at the weld joint. Ironworks Gate Co. has been sorting out exactly these failures for over 42 years, and our crews know Keene’s neighborhoods and rural roads well. Call (469) 564-8046 when a gate stops swinging right, and a live person answers, day or night.
Why Ironworks Gate Co. Is Keene’s Preferred Gate Parts & Welding Company
Keene is not Burleson. The housing stock along 76059 is different, the lots are bigger, and the soil under every gate post is heavier and more active than what most contractors from outside Johnson County expect. We know that a sagging gate on a Keene ranch property usually means a post has heeled over in the gumbo, not that the hinges simply wore out. That local read saves homeowners from paying for hinge work that would fail again in eighteen months.
Victor Salinas leads our crews, and the standard he sets is simple: the 400th job gets the same care as the first. Technicians arrive background-checked and uniformed, with the truck stocked for Keene’s common failures: heavy post anchors, weld rod for pipe-to-rail joints, replacement rollers, and brackets for our Gate Motor & Opener in Keene brands we see on area gates. Every job is quoted before work starts, and every completed repair carries our written 90-Day Done Right Promise. No paperwork to file, no arguing. If it is not right, we come back and make it right.
Response time to Keene is measured in hours, not days, for gate welding and parts calls. A stuck gate on a property off North Old Betsy Road or along the ranch parcels east of 174 gets the same priority as a commercial job in Cleburne. Our dispatch is coordinated from the Dallas-Fort Worth office, but the technicians serving Keene live and work in the immediate area. You will not wait half a day for a crew to drive in from the metroplex.
Learn more about our Gate Parts & Welding service on our main service page, or see how we serve Keene specifically with same-week scheduling for most part replacements.
Our Gate Parts & Welding Services in Keene
We focus on the gate work Keene actually needs, not a generic list of everything a welding shop might offer. Four services cover most of what we see on properties throughout the city and the surrounding acreage: hinge replacement, post replacement, rail repair, and Gate Installation - Keene through custom welding. Here is what each involves locally.
Post Replacement
In Keene, post replacement is the highest-leverage repair we do. The Blackland Prairie clay underneath Johnson County shrinks in summer and swells in winter, and a post set without a deep, bell-bottomed footing will move. Not once, but every single year. We pull the old post, dig to the correct depth for the soil, set a new post with concrete that extends below the active clay layer, and re-hang the gate so it clears true. A post done right in Keene should hold plumb for twenty years, not two.
Custom Welding
Ranch-style pipe gates and the steel frames common on Keene properties were often site-built years ago, and when they crack, standard replacement parts do not exist. Our welders fabricate on site: reinforcing a hinge post with a gusset plate, re-welding a rail joint, building a new bracket for an opener arm, or extending a gate panel with Gate Access Control in Keene hardware in mind. We weld the metal that is already there, matched to its thickness and condition. For a property manager near Southwestern Adventist University, that often means keeping a functioning gate in place on a Friday rather than parking the whole entrance over the Sabbath.
Rail Repair
Wide farm gates put enormous torque on the top rail, especially with heavy pipe panels swinging off a single post. The weld at the post-to-rail junction cracks after a few hundred cycles if the post was never set deep enough. We re-weld the joint correctly, and where the design calls for it, we add a gusset or a second weld pass so the gate does not crack in the same place next season. Keene’s freeze-thaw cycles make this failure mode more common here than in most of the DFW metro area.
Gate Rollers
Chain-link slide gates and larger steel slider gates on Keene acreage rely on rollers, and those rollers wear fast in clay soil where grit gets into the track. We replace rollers, check the track alignment, and set the gate so it does not bind. A slider that drags is a roller problem more often than a track problem, and swapping rollers before the track gets wallowed out saves the cost of a full track replacement later.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keene
The openers we see most often on Keene properties are FAAC, DoorKing, Ghost Controls, and Mighty Mule. Our technicians are trained on nine major automation brands total, and we keep common parts for these brands on the truck: brackets, arms, limit switches, and control boards. If your gate works manually but the opener has quit, we can usually identify the failed part during the first visit and have the correct replacement installed before we leave. No waiting a week for a distributor to ship a part from out of state.
Common Gate Parts & Welding Problems We See in Keene Homes
- Leaning hinge posts after wet winters. The black gumbo soil under most Keene lots heaves and shrinks. Posts set with shallow concrete or no footing at all move within two or three dry-wet cycles, and the gate starts to sag and scrape. The fix is a proper post reset, not hinge shims.
- Cracked welds at pipe-to-rail joints. Heavy ranch gates swing thousands of times a year, and the weld at the post junction takes the entire load. When that weld cracks, the gate drops an inch or more, and the hinges bind. We see it most often on gates wider than twelve feet.
- Solar opener failures on long driveways. Keene properties often run 300 feet or more from the county road to the house, and running grid power to a gate opener is expensive. Solar systems work well, but shaded tree lines and overcast stretches drain batteries. We replace panels and batteries and size the system to the actual gate weight and cycle count.
- Worn rollers on chain-link and steel slider gates. Clay grit works its way into roller bearings, and a slider that used to roll true starts to grind. Replacing rollers early keeps the track from wearing into an oval, which is a significantly more expensive repair.
Pricing for Gate Parts & Welding in Keene, TX
In Keene, a straightforward hinge replacement on a standard pipe gate typically runs $180 to $300, including the new hinges and labor. Post replacement runs between $450 and $900 depending on post size and how much concrete the old post was bedded in. Custom welding jobs are quoted by the hour plus materials, and in Keene most small weld repairs land between $150 and $400. Roller replacement on a chain-link slider gates runs $120 to $250 per roller set. If the repair requires a crane or skid steer to pull a heavy post, that adds to the quote. Every price is quoted and agreed in writing before we start. Call (469) 564-8046 for a free estimate on your specific gate.
We Also Serve Cities Near Keene
Ironworks Gate Co. serves Keene plus the surrounding Johnson County communities of Cleburne, Joshua, Alvarado, and Burleson. If you manage a farm gate east of town or a church entrance in one of these nearby areas, the same crews and the same 90-Day Done Right Promise apply. See our Gate Parts & Welding in Keene page for local coverage details.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Keene
Because the problem was never the hinges. Keene sits on the Blackland Prairie, and the heavy clay soil, called gumbo by local builders, shrinks in summer and swells in winter with enough force to tilt a shallow-set post out of plumb in two or three seasons. The hinges fail because the post moved. The correct fix is a post replacement with a footing that extends below the active clay layer, bell-bottomed so the soil cannot jack it upward. Call (469) 564-8046 and we will inspect the post before quoting any hinge work.
Yes. In most cases we weld the bracket directly to the pipe using the correct rod and amperage for the steel’s thickness, without cutting or splicing the gate frame. We position the bracket so the opener arm has the right geometry, then test the full swing before we leave. This is standard work for our Gate Parts & Welding crews on Keene ranch gates.
Yes, and many Keene properties need exactly this. We install solar gate openers sized to the actual gate weight and the number of daily cycles, with battery capacity for cloudy stretches and shaded tree lines. FAAC and Ghost Controls make solar-compatible operators we install regularly in 76059. The panel location matters, so we site it for the best sun exposure at your gate, not just where it is easiest to mount. Call us for a written quote on a solar opener sized for your driveway.
First, identify whether the sag is from a worn hinge or a leaning post. If the post has moved in the clay, no hinge adjustment will hold, and the fastest real fix is a same-week post replacement with proper concrete depth. If the hinges themselves are worn, we replace them in a single visit. On long ranch driveways, we may also re-weld the rail joint where the gate panel meets the post, since that is where the load concentrates. Call (469) 564-8046 and we will tell you which one it is.
Yes, subject to the observance schedule that Keene’s Seventh-day Adventist community follows. We understand that emergency calls on church or university properties from Friday sundown to Saturday sundown often cannot be scheduled until Saturday night or Sunday. Call us Friday afternoon and we will hold a Sunday slot for you, or dispatch Saturday evening if the property is ready for us. This is a timing dynamic we handle regularly in Keene that would not occur in Burleson or Cleburne.
Contact Ironworks Gate Co. for Gate Parts & Welding in Keene
If your gate post has heeled over, a weld has cracked, a roller has seized, or an opener bracket has snapped, call (469) 564-8046. A live person answers 24 hours a day, 7 days a week, and we will schedule a technician for your Keene property. You get a written price before any work begins, a crew that knows the local clay and the local gate stock, and a 90-Day Done Right Promise on every completed job. One call should be the last time you deal with that gate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keene and Johnson County since 1984.