Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Benbrook
Gate parts and welding in Benbrook usually comes down to one of two problems: a hinge post that has heaved out of plumb in the clay, or a gate that was never built heavy enough for what it actually does. We handle both, plus everything in between. Our crews work throughout Benbrook from the Timber Creek area to the acreage along Lakeside Drive, and we keep common hinge barrels, roller assemblies, and latch hardware on the truck so most weld and hardware repairs are finished the same visit. Call (469) 564-8046 for a free estimate, and you’ll get a written price before any work begins. A live person answers around the clock, seven days a week.
Why Ironworks Gate Co. Is Benbrook’s Preferred Gate Parts & Welding Company
We’ve been running crews into Benbrook long enough to know that a gate off Lakeside Drive and a gate in the subdivisions near Benbrook Boulevard are not the same job. The soils, the wind, the gate spans, and the hardware all differ, and a repair that treats them as identical fails early. That’s the main reason Benbrook homeowners call us when the first fix did not hold. Our Gate Parts & Welding team carries a written 90-Day Done Right Promise on every job. If it is not right, we come back and make it right. No arguing, no paperwork, no exceptions.
Victor Salinas runs our crews, and he holds the same standard on the 400th job as the first: Krafted right, Every time, Your home first, Standing behind it. The technicians who arrive at your gate in Benbrook are background-checked and uniformed, and they work on your property the way they’d work on their own mother’s. We’re licensed, insured, and bonded, and we quote the full price up front so the invoice matches the estimate. Every time.
Our Gate Parts & Welding Services in Benbrook
Hinge Replacement
Worn hinges are the most common call we get in Benbrook, and on the lake side of town they fail a particular way. Wide gates built for boat trailers put far more load on the barrel than a standard three-foot walk gate ever does. We replace sheared and sagging hinges with commercial-grade weld-on units, and on Benbrook Lake shoreline properties we spec greaseable barrel hinges rather than bolt-on residential hardware. A hinge replacement in Benbrook typically runs $180-$420 depending on gate weight and whether the post itself needs correction.
Post Replacement
Benbrook’s expansive clay soils shrink in the dry heat of a North Texas summer and swell again after fall rains. That cycle slowly works a gate post out of plumb until the latch side drags or the gate will not close at all. We remove the old post, dig deeper than the original footing, set the new post in concrete with rebar, and re-hang the gate dead level. Post replacement in Benbrook generally runs $350-$850 depending on post size, depth, and whether the gate must be temporarily supported while concrete cures.
Rail Repair
A sagging middle rail is not just cosmetic. It means the frame is racking, and every cycle is bending the steel further. We straighten or splice bent rails, reinforce cracked joints with proper welds, and stiffen the frame so the sag does not return. On ranch-style pipe gates along the acreage south of Benbrook, rail repair often means adding a diagonal brace the original builder skipped. Expect $150-$400 for most rail repairs in Benbrook.
Custom Welding
Some Benbrook gates were built for this property and this one only, and off-the-shelf parts will never fit them. We do custom welding for gates of all sizes: building a new frame section, extending a gate for a wider opening, fabricating a custom bracket for an opener arm, or adding steel mesh to keep dogs and livestock in. Custom welding jobs in Benbrook typically start around $200 and run up from there based on material and hours. We quote the full amount before the welder strikes an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
When a Benbrook gate has an opener and a weld repair is needed, we are careful not to damage the automation while we work. Our technicians are trained and equipped on nine gate-automation brands, including Ghost Controls, DoorKing, and Elite, which covers most of the openers we see on Benbrook driveways and acreage entrances. We keep common parts stocked for those brands and can usually complete a weld or hinge replacement without needing a second visit, even when the operator has to be temporarily dismounted and re-timed.
Common Gate Parts & Welding Problems We See in Benbrook Homes
- Hinge posts leaning from expansive clay. Benbrook sits on clay that heaves hard through the wet-dry cycle. During dry summers the soil pulls away from the footing and the post tilts, which makes the gate bind or drag at the latch side. The fix is a new, deeper footing, not just a hinge swap.
- Wide boat-trailer gates racking diagonally. Properties with direct access to Benbrook Lake often have wide secondary gates sized for trailer clearance. Those gates cycle more often and carry more weight, and residential bolt-on hinges eventually shear off. We replace them with commercial weld-on barrels built for the load.
- Southwest wind torquing cantilever slide gates. The prevailing winds that funnel across Benbrook Lake put repeated lateral stress on single-post cantilever installations. Over time the rack and pinion strips, or the post footing cracks and the gate starts to skate. We correct the footing and re-align the rack so the operator stops working against itself.
- Decades-old hardware on original ranch-style gates. Much of Benbrook’s housing stock was built from the late 1960s to the early 1990s, and many of those original tubular steel gates are still hanging. The steel is fine, but the hinges, latches, and rollers are forty years into their service life. Replacing the hardware gives the gate another four decades.
Pricing for Gate Parts & Welding in Benbrook, TX
Here is what Benbrook homeowners can expect to pay for common gate parts and welding work:
- Hinge replacement: $180-$420
- Post replacement with new concrete footing: $350-$850
- Rail repair or frame straightening: $150-$400
- Sag correction (weld and re-hang): $250-$600
- Custom welding (fabrication, brackets, gate extension): $200 and up
- Latch and lock replacement: $120-$300
These are honest ranges for the Benbrook market, quoted before work starts. The price we give you is the price on the invoice. Call (469) 564-8046 and we’ll give you a free written estimate, and if you have another company’s written quote, ask about our Free Second Opinion. We also extend a permanent 5% discount to seniors and veterans.
A Benbrook Gate Problem We Know How to Solve
Out near the Timber Creek addition off Lakeside Drive, we rebuilt a 20-foot pipe ranch gate that had been dragging across the driveway for months. The real culprit was a hinge post that had shifted nearly 3 inches out of plumb from clay heave. We cut the old post free, set a new one in a deeper concrete footing with rebar, and welded on commercial-grade hinge barrels with grease fittings. Then we re-hung the gate and added a Ghost Controls solar gate opener with a loop detector so the owner’s stock trailer could come and go without getting out of the truck. That job is the whole story of gate work in Benbrook: the welding matters, but the footing is what decides whether the repair lasts.
We Also Serve Cities Near Benbrook
Our Benbrook customers live all across the city, and we regularly take calls from neighbors in Burleson, Alvarado, Crowley, and Joshua as well. If your gate is just down the road in any of those communities, call (469) 564-8046 and ask for a free estimate. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and our crews serve Benbrook locally.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Benbrook
Because the hinge is rarely the root problem in Benbrook. The expansive clay under your post is heaving and the post has moved, which means every hinge adjustment is just compensating for a footing that’s still shifting. The lasting fix is to reset the post in a deeper concrete footing with rebar, then re-hang the gate on new weld-on hinges. Call (469) 564-8046 and we’ll take a look and give you a written quote.
We generally will not, and for good reason. Welding to a post that is out of plumb just locks the misalignment into the gate, and the repair will not hold. The correct sequence is to cut the gate free, correct or replace the post, then weld and re-hang with the gate level. Every Benbrook job we do is quoted before work starts, so you’ll know the full price before any metal is cut.
For any Benbrook gate over about 12 feet wide, especially the lakeside gates that clear boat trailers, use commercial-grade weld-on barrel hinges with grease fittings, not bolt-on residential strap hinges. The barrel distributes the load along the full length of the post and the grease fitting lets you keep it working smoothly for years. We stock these hinges and weld them on as part of our standard repair on wide gates. Call (469) 564-8046 for a free estimate.
Almost always no. The dry-summer shrinkage in Benbrook’s clay soil has pulled the footing and tipped the hinge post, so the gate is dragging at the latch side. The weld itself is usually fine. The repair is a new, deeper footing and a re-hang, and we do that work throughout the acreage areas of Benbrook. Expect to pay $350-$850 for a typical post replacement, quoted before we start.
Yes, and it works well in Benbrook because North Texas gives us reliable sun most of the year. We install solar-powered openers from brands like Ghost Controls and Mighty Mule on acreage gates far from the grid, and we size the panel and battery for the gate’s weight and cycle count, not just the brand’s minimum. If you want a solar operator added to an existing ranch gate, call (469) 564-8046 and we’ll give you a written price.
Call Ironworks Gate Co. for Gate Parts & Welding in Benbrook
If your gate is sagging, dragging, leaning, or shearing hinges, call (469) 564-8046 today. We’ll answer in person, schedule a time that works for you, and give you a free written estimate before any weld is made or any part is replaced. The job is only done when the gate closes square and smooth, and it stays that way. That’s the standard, and it’s in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook and the surrounding area.