Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Rendon
Gate motor and opener repair in Rendon usually costs between $195 and $485 for common failures like bad control boards, stripped gears, and misaligned limit switches. Most jobs are completed in one visit. If your driveway gate stopped opening this morning off Rendon Road or down toward Farm Road 1187, call (469) 564-8046 and you’ll get a live person, not a voicemail, any hour of the day.
Ironworks Gate Co. has worked on automated gates across Rendon for years. We know the acreage properties, the horse farms, the long private drives off Shelby Road and Wichita Trail. We know what Blackland Prairie clay does to a gate post. And we know the difference between a motor worth rebuilding and one that belongs in the scrap bin.
Why Ironworks Gate Co. Is Rendon’s Preferred Gate Motor & Opener Company
Rendon is not a suburb. It’s an unincorporated stretch of southern Tarrant County where driveways run long, gates are heavy, and the soil moves more than most people would believe. That combination breaks gate operators in ways you won’t see five miles north in Burleson or Crowley. We’ve spent the time learning those failure patterns, because that’s what lets us fix the problem on the first trip instead of the third.
Every technician who rolls into Rendon is background-checked, uniformed, and trained across nine automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most repairs are completed in a single visit, with the price agreed in writing before any work begins. When we leave, the job is covered by our 90-Day Done Right Promise, a written guarantee that says plain and simple: if it’s not right, we come back and make it right.
Victor Salinas founded this company in 1984, and he built it on a straightforward rule: the 400th job gets the same care as the first. That’s why Rendon homeowners keep our number in their phones, and why they recommend us to neighbors down the road.
Our Gate Motor & Opener Services in Rendon
We work exclusively on driveway and estate gates. That’s the whole business. No garage doors, no fencing side jobs, just gates, motors, and the automation that runs them. Here’s what we handle most often in Rendon.
Motor Installation
A new operator installation in Rendon typically runs $1,400 to $3,200, depending on gate length, weight, and whether we’re adding battery backup or keypad access. We don’t hang a motor on a bad foundation. Around here, that means checking the hinge posts first. If the post is set shallow in clay with no concrete, no new motor will hold alignment for long. We’ll tell you honestly when a post reset needs to happen before the operator goes on, and we’ll quote it as part of the job, not as a surprise add-on.
Motor Repair
Most motor repairs in Rendon fall between $195 and $485. That covers failed capacitor-start motors, burned control boards, stripped limit switches, and broken gear assemblies. We carry common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on our trucks, which means many repairs happen the same day we arrive. If your gate opens halfway and dies, or hums and won’t move, call us before you keep pressing the remote. Repeated attempts against a bound operator can burn out a motor that was repairable.
Linear Motor
Linear swing gate operators, common on the ornamental iron driveway gates in Rendon’s newer acreage subdivisions, fail most often from water intrusion and hard-freeze damage. A replacement linear arm assembly usually runs $450 to $900 installed. In our experience working properties off Wichita Trail and along Kennedale Road, the failures cluster after big storms and deep freezes. If your gate worked fine until the last ice event, you probably don’t need a full system replacement. You need a diagnosed repair on the actuator and new seals.
Slide Motor
Slide gate operators on older ranch installations in Rendon carry their own set of problems. The concrete pad under the gate track heaves unevenly as the clay expands and contracts, which throws off the gear mesh between the rack and pinion. The operator then skips teeth, faults its limit switches, and eventually strips the drive gear. That repair typically lands between $320 and $750, depending on whether we’re re-shimming the rack, replacing the gear, or re-setting the operator base.
We also handle Gate Motor & Opener work involving intercom integration and battery backup systems, two upgrades that matter a great deal on long rural driveways where the power line is exposed and the gate is far from the house.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We service nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule, which are four of the most common names on Rendon acreage gates. Whether your operator is a 15-year-old DoorKing slide motor or a Ghost Controls system installed three years ago by a builder, we know the wiring, the control boards, and the common failure points. We keep parts for these brands stocked on our trucks so we’re not making you wait a week for a capacitor or a limit switch to ship.
Common Gate Motor & Opener Problems We See in Rendon Homes
Rendon’s semi-rural setting and expansive clay soil create a specific set of gate operator failures. After 42 years working gates in this part of Tarrant County, we can usually diagnose the problem by phone before we even arrive.
- Gate posts racked out of plumb throwing the operator out of alignment. The clay under Rendon shrinks through the dry summer and swells after spring rains. A post with a shallow footing moves with that cycle. The gate then binds against the operator, which overheats the motor and eventually burns it out. Repairing the motor without addressing the post means you’ll call us again in a year.
- Legacy operators on wood-post gates with chronic binding. Many of Rendon’s older properties still run agricultural-grade openers mounted on wood posts that twist as they age. The binding load shortens motor life dramatically, especially on capacitor-start motors rated for far lighter duty than a sagging ranch gate.
- Hard-freeze damage to hydraulic operators. After severe ice storms like February 2021, we see a wave of calls where swing gate hydraulic operators have cracked reservoirs or blown seals. Freezing water expands inside the cylinder, and the operator is dead in the middle of the driveway.
- Slide gates skipping teeth on heaving concrete pads. The rack-and-pinion drive on a slide gate depends on a level, stable pad. When the pad heaves unevenly, the gear mesh fails, the operator faults on its limit switches, and the gate stops partway open. We fix the drive, but the fix only holds if we first level the rack and address the pad.
Pricing for Gate Motor & Opener in Rendon, TX
Here’s what Rendon homeowners can expect to pay for common gate motor and opener work in 2026. Every price is quoted and agreed in writing before work begins, so the invoice never surprises you.
- Motor repair (control board, capacitor, gear, limit switch): $195-$485
- Linear actuator replacement (swing gate): $450-$900
- Full operator installation, standard single swing gate: $1,400-$2,600
- Full operator installation, heavy or long slide gate: $2,200-$3,200
- Battery backup installation (add-on): $350-$700
- Gate post reset in concrete (when needed): $400-$1,000 per post, depending on gate size and tear-out
Several factors move a quote up or down: the length and weight of the gate, whether the hinge posts are plumb, the condition of the existing wiring, and whether you want add-ons like keypads, intercom integration, or solar charging instead of a trench for line voltage. We always provide the full number before we start work, and we always honor that number. We also offer a $50 discount on any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% senior and veteran discount. Call (469) 564-8046 for a free estimate on your Rendon gate.
We Also Serve Cities Near Rendon
Our gate motor and opener crews are based in the Dallas-Fort Worth metro, and Rendon is one of the communities we serve regularly. We also work in Burleson, Alvarado, Crowley, and Joshua. If you’re in one of those towns and your driveway gate has stopped cooperating, you’ll get the same live-answer phone support and the same written 90-Day Done Right Promise. Learn more about Gate Motor & Opener in Rendon and the surrounding area, or call us directly.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Rendon
Because Rendon is unincorporated Tarrant County, there’s no municipal code requiring concrete footings for driveway gates. A surprising number of operators here are mounted on T-posts driven straight into expansive Blackland Prairie clay. The clay shrinks in the dry heat and swells after rain, and within a season or two the posts are out of plumb and the operator is binding. That binding load is what kills motors and control boards early. Before you replace another operator, have the posts inspected and, if needed, re-set in proper concrete footings. Call (469) 564-8046 and we’ll give you an honest assessment.
Yes, in most cases we can retrofit an older chain-drive slide gate with current safety equipment: photocells, contact edges, and a properly configured control board that meets UL 325 entrapment standards. The retrofit typically costs between $500 and $1,100 depending on the operator’s condition and what safety hardware is missing. If the old motor itself is solid, this is usually money well spent compared to a full replacement. If the motor is on its last legs, we’ll tell you that too, and give you numbers for both paths.
In Rendon’s clay soil, usually not, unless you fix the post first. An operator mounted on a post that’s moving with the seasons will bind, overheat, and fail again no matter how well the motor itself is repaired. The right sequence is: pull the old post, auger a 36-inch footing, set the post in concrete, and only then install or reconnect the operator. Post re-setting runs $400 to $1,000 per post depending on the gate, and it’s the difference between a gate that works for decades and one that needs a service call every spring.
Hydraulic swing gate operators can crack reservoirs or blow seals when water freezes and expands inside the cylinder. Chain-drive and rack-drive slide gates can seize when ice builds up on the track. After hard freezes like February 2021, we see a surge of repair calls from Rendon acreage properties where gates died mid-drive. If your gate stops working after a freeze, don’t force it with the remote. Repeated attempts against a frozen or hydraulically locked operator can do permanent damage. Call us and we’ll diagnose it, usually the same day.
Yes. For gates far from the electrical panel, a solar-charged battery system with a low-draw operator is often the most practical solution, and it avoids the cost and mess of trenching a long power run across your property. A solar gate opener installation in Rendon typically runs $1,800 to $3,100 including the panel, battery bank, and operator. As a bonus, a battery-backed system keeps the gate working through power outages, which happen often enough in this part of Tarrant County. Give us a call at (469) 564-8046 and we’ll walk the site with you and quote the full job.
Done Right, and Backed in Writing
Rendon homeowners have been calling Ironworks Gate Co. for gate motor and opener work because we answer the phone, show up when we say, and stand behind every job in writing. If your gate won’t open, or won’t close, or opens halfway and quits, don’t spend another morning wrestling with it by hand. Call (469) 564-8046. A live person answers, 24 hours a day, 7 days a week. We’ll give you a straight answer and a free estimate for the repair, and if we can fix it in one visit, we will.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rendon and surrounding communities.