Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Everman
Gate motor and opener work in Everman almost always starts with the same unglamorous truth: the soil under your gate has been moving for fifty years, and the motor is the last thing that failed. In this small enclave city surrounded by Fort Worth, the original 1960s and 1970s chain-link and steel tube gates sit on shallow post footings that Houston Black clay has been working against through every wet spring and dry summer since the day they were poured. We know Everman, we know those footings, and we know the repair sequence that actually holds. When your opener strains, faults, or burns out in Everman, call (469) 564-8046 and describe what it’s doing. We’ll tell you straight what it needs.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Motor & Opener Company
Everman homeowners don’t call a gate company for the first time when everything works. They call after a one-truck outfit has already been out twice, after a handyman said the motor was bad when the post was leaning like the Tower of Pisa, after the gate dragged for a year and finally stripped the rack. We have spent over 42 years earning the other kind of reputation: the company that shows up when it says, diagnoses the actual problem, and fixes it the first time. Our Gate Motor & Opener team has worked driveways off Enon Drive, across Wichita Street, and through the older ranch-home streets where gate posts date to the original construction. We are not a generalist. Gates are all we do.
Every technician who rolls into Everman is background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. Victor Salinas, who runs our crews, drills one rule into every tech: diagnose the structure before you touch the motor. In Everman, that rule is the difference between a repair that lasts a decade and a callback next spring. We carry certification on nine major opener brands, including the DoorKing, Elite, and Ghost Controls units common on older Everman ranch gates. And a live person answers our phone 24 hours a day, seven days a week. Not a voicemail. Not an answering service. A person who can dispatch to Everman the same day when your gate is stuck open and the dog is eyeing the street.
Our Gate Motor & Opener Services in Everman
Motor Installation
A new gate opener in Everman needs a foundation that won’t fight it. We install linear arm operators, underground operators, and slide gate motors matched to the gate’s weight, width, and cycle count. Before a single bolt goes in, we check the posts for plumb. On a ranch-style home off School Road, we measured a corner post leaning 2.5 inches toward the latch post. Installing a fresh motor on that post would have worked for a season. We set the post right, then hung the opener. That’s the order, every time.
Our installation work includes the full electrical: dedicated circuit where possible, proper grounding, surge protection, and zero splice-and-tape corners. For Everman gates at the back of long lots where mains power was never run, we size solar operator packages with battery capacity for Tarrant County’s cloudy stretches, not just the sunny days.
Motor Repair
The most common call we get from Everman is a motor that runs, strains, and faults. In this city, that usually isn’t a motor problem at all. It’s a post problem, or a gate panel dragging on ground that rose two inches with the spring clay heave. We test the motor under load, check amp draw, inspect the gearbox and limit switches, and then work backward to the structure. When we do replace a motor, it’s because the motor is genuinely done-not because it was the easiest thing to quote.
Motor repair in Everman typically runs $180 to $420 for faults, limit switch replacement, gearbox work, and control board diagnosis. Full motor replacement on a typical chain-link swing gate runs $650 to $1,400 depending on brand and operator type. We’ll tell you the price before we turn a wrench, and that price doesn’t change unless you add work and approve it first.
Linear Motor
Linear arm operators are a clean choice for Everman chain-link swing gates that see daily use. They bolt to the post and the gate, pushing and pulling the leaf with a simple threaded drive. The catch in Everman: if the post has rocked even half an inch, the linear arm binds at the end of its travel and burns out the internal limit switch. We check the post first, then install the motor. We service and install linear motors from Linear, Ghost Controls, Mighty Mule, and several others, and we’ll tell you honestly whether a linear arm or an underground operator is the better fit for your gate’s weight and the way it hangs.
Slide Motor
Slide gate operators were never the default in Everman’s original ranch housing stock, but they show up on the wider driveway entrances and the occasional side-yard gate on larger lots. A slide operator works hard here because the gate track sits right in the path of Tarrant County clay movement. The track heaves, the gate binds, and the motor eats its gears. On a slide gate repair off Oak Grove Road, we found the track had lifted a full inch at the midpoint, which was the entire reason the BFT operator was grinding. We reset the track, re-shimmed the rollers, and the motor quieted down immediately. Slide motor repairs in Everman run $200 to $500 for typical faults; full operator replacement runs $800 to $1,800.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
We are trained and equipped on nine gate automation brands, including the ones we see most on Everman driveways: Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a Ghost Controls linear arm doesn’t fault like a DoorKing slide operator, and the fix for one isn’t the fix for the other. We carry common parts and boards for these brands in our trucks, so a motor diagnosis on an Everman driveway doesn’t turn into a two-week wait on a part from a warehouse. If your opener was installed in the 1990s or early 2000s, we will tell you straight whether a repair makes sense or whether a new operator is the better use of your money. No upselling, no brand snobbery. Just the right call for the gate on your property.
Common Gate Motor & Opener Problems We See in Everman Homes
- Clay soil heaving shifts the hinge post. In Everman’s Houston Black clay, spring rains push posts up and out of plumb; summer drought lets them settle back wrong. The gate binds, the operator over-heats, and the internal breaker trips. The motor didn’t fail; the ground moved under it.
- Shallow 1970s post footings let the gate drag. We regularly find original Everman gate posts set only 18-24 inches deep with a thin coat of concrete. Fifty years later, those posts rock like a loose tooth. The gate panel drags on the ground, the motor strains, and the rack strips. Reset the post first; everything else holds after.
- The gate was never landed square, even from day one. Some of Everman’s original steel tube gates were hung on posts that were just barely square in 1968. Add fifty years of soil movement, and the latch doesn’t line up, the safety photocell won’t align, and the opener hunts for a closed position it can’t find.
- Safety edges and loop detectors fail silently. On Everman’s older automated gates, the safety edge has often been rusted, wired around, or disconnected for years. The gate still opens, but it won’t stop if a child or pet crosses the path. Given how many Everman gates sit close to the street, we treat this as a repair, not a suggestion.
Pricing for Gate Motor & Opener in Everman, TX
You should know what a gate motor job costs in Everman before you commit to anything. Here are the ranges we quote most often: basic motor fault diagnosis and repair, $180 to $420. Full swing gate motor replacement, $650 to $1,400. Slide gate operator replacement, $800 to $1,800. Post resetting with new footing, $400 to $900 per post, depending on depth and concrete required. Solar panel and battery package for a gate with no mains power, $900 to $2,200. These are Everman prices-not Dallas showpiece prices-because we know the housing stock and the gate styles here. Every price is quoted and agreed in writing before any work starts. No surprises on the bill. We also honor $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (469) 564-8046 for a straight quote on your specific gate.
We Also Serve Cities Near Everman
Our Everman crews regularly run the same roads through Burleson, Alvarado, Crowley, and Joshua, where the soil and the gate styles are close cousins to what we see on Everman’s side streets. If your property sits on the edge of Everman or you have family just over the line, we can likely reach you the same day. For the full scope of our work across the wider area, see our Gate Motor & Opener in Everman service area page.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Everman
In Everman, a new opener that faults after heavy rain is almost always a post or footing problem, not an electronics problem. Houston Black clay absorbs rainwater and swells, heaving a shallow post upward and throwing the gate out of alignment. The opener faults because it hits resistance it can’t overcome. On Enon Drive, our tech arrived for a LiftMaster swing gate operator that would start, strain, and fault out on a 14-foot chain-link farm gate. After checking the rack and pinion and replacing a suspect safety photocell, we found the real issue: the hinge post had been set barely 20 inches deep in 1978 and was leaning a full 3 inches toward the latch post. We reset that post in a new 42-inch deep footing with extra concrete, hung the gate square, and only then installed a new linear motor operator. The owner said it was the first time the gate had closed itself since the 1990s. If your opener faults after rain, call (469) 564-8046 and we’ll tell you what the post is doing.
Yes, and on Everman’s longer unpaved driveways where mains power was never run, a properly sized solar package is often the cleanest solution. We size the panel and battery bank for Tarrant County’s cloud cover and winter light, not just for a sunny July afternoon. The panel count depends on the gate’s weight, your daily cycle count, and whether you’re adding a keypad, intercom, or loop detector. A solar package for a typical Everman chain-link swing gate runs $900 to $2,200 installed, and we’ll give you a straight answer on the panel and battery size before you buy anything. Call (469) 564-8046 for an exact quote on your gate.
The real fix is usually resetting the post, not replacing the motor. When an Everman gate drags, the panel is almost never heavier than it was in 1970. What changed is the post: decades of clay soil movement have rocked it enough that the gate now sweeps the ground at the latch end. A motor that keeps running against that drag will burn out. The fix that holds is digging the post, setting it in a new, deeper footing, re-hanging the gate square, then returning power. Post resetting in Everman runs $400 to $900 per post, and we will always quote that number before we dig. Call (469) 564-8046 and describe where the gate drags; we’ll tell you what we expect to find.
Stand at the gate and wave your hand through the beam between the two photocell housings while the gate is closing. The gate should stop and reverse immediately. On Everman gates, aged housings, dirt-caked lenses, and gates that have shifted out of square are all common reasons the beam fails. A photocell that is aligned but dirty will still fault every cycle. If the beam is wired around, which we find regularly on older Everman installs, the gate will close on whatever is in the path. We test this on every gate we touch, and if your photocells aren’t working, we’ll quote the replacement before doing the work. Call (469) 564-8046 for a gate safety check.
No. Grinding means something metal is eating something metal, and it will only get more expensive the longer it runs. On a BFT slide operator, the usual sources are a rack that’s out of alignment from track heave, a pinion gear with worn teeth, or a gearbox low on oil. On one Everman job off Oak Grove Road, the track had lifted an inch at the midpoint from soil movement, and the operator was grinding its pinion against a misaligned rack. We reset the track, re-shimmed the rollers, and the noise stopped. Slide motor repairs in Everman typically run $200 to $500 when caught early; full operator replacement runs $800 to $1,800. Call (469) 564-8046 and describe the sound; we’ll tell you what it likely is before we arrive.
Your gate is the first thing that opens for you and the last thing that closes behind you. When it needs a motor, an opener, or a post set right in Everman’s soil, call Ironworks Gate Co. at (469) 564-8046. We’ll quote the job plainly, show up when we say, and put it in writing. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman and the surrounding Tarrant County communities for over 42 years.