Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Everman
Gate repair in Everman usually comes down to two things: a post that has shifted in the clay, or an opener that has outlived its control board. We get calls from homeowners off Enon Avenue, Wichita Street, and the neighborhoods around Johnson Park who have been fighting a gate that drags, won’t latch, or stopped responding to the remote. Our crews know Everman’s soil and housing stock, and we carry the parts to fix most gates the same day we arrive. If your gate is giving you trouble, call (469) 564-8046 and a live person will answer.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Repair Company
We have been repairing gates in Tarrant County for over 42 years, and Everman’s older ranch homes are exactly the kind of work we cut our teeth on. Dispatch is coordinated from our Dallas-Fort Worth office, and crews reach Everman fast when a gate will not open or a post has started to lean. Homeowners here tend to keep their houses for decades. They know what a cheap fix looks like, because they have paid for one before. What they want is someone who will tell them the truth about the gate, fix what is actually wrong, and stand behind the work.
Every job we complete in Everman is covered by our 90-Day Done Right Promise. Written, no fine print, no phone tag. If it is not right, we come back and make it right. Background-checked, uniformed technicians work under a values code we call K.E.Y.S.: Krafted right, Every time, Your home first, Standing behind it. And when you call us, a person answers. Day or night. Not a voicemail tree.
Our Gate Repair Services in Everman
Most Everman gates were hung in the 1960s and 1970s. That means the repair call is rarely just a hinge or just a latch. It is usually a combination: a post that has moved, hardware that wore out against the misalignment, and an opener board that gave up. Here is what we actually do in Everman on a routine basis.
Electric Gate Repair
Electric gate repair in Everman lines up with the age of the operators on these driveways. Many of the control boards installed in the 1980s and 1990s are now obsolete. When a board fails, you cannot simply buy the replacement anymore. We diagnose whether your operator can be retrofitted with a modern board that supports current UL 325 entrapment protection, or whether our Gate Motor & Opener in Everman team needs to replace a motor that is too far gone. The answer determines the smartest spend. We service nine opener brands, including Ghost Controls, DoorKing, and Mighty Mule.
Automatic Gate Repair
An automatic gate that opens halfway, reverses for no reason, or grinds on startup is often not a motor problem at all. In Everman, the first thing we check is whether the gate has bound against the post from clay movement. The motor works harder, the limit trip, and the homeowner thinks the operator is dead. We fix the mechanical bind first, then address the opener. It saves you the cost of replacing a motor that wasn’t broken.
Hinge & Post Repair
This is the bread-and-butter call in Everman. Original posts on homes built between the 1960s and 1980s were set 18 to 24 inches deep with minimal concrete. Fifty years of Blackland Prairie clay expanding and contracting has rocked those posts loose. Hinges tear, welds crack, and the gate leans in or falls away from the latch. Replacing hinges without addressing the post is throwing money into the same hole. We reset the post in a deeper, wider concrete footing, then remount the gate so it actually stays put.
Gate Realignment
Gate realignment in Everman almost always starts at the post, not the hinges. A gate that scrapes the driveway or will not reach the latch post usually has a post leaning two or three inches out of plumb. Once we correct the post and level the frame, the existing hardware often works fine. We still inspect every hinge and latch point after the reset, because after decades of stress, some will need our Gate Parts & Welding in Everman service to replace them. The goal is a gate that opens with one hand and closes on its own, the way it did when it was first hung.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
We are certified on nine gate automation brands, and Gate Access Control in Everman means we see DoorKing, Ghost Controls, and Mighty Mule most on these driveways. Older DoorKing operators show up on many of the original automatic gates in this area, and we keep common boards, remotes, and safety photocells stocked so we are not waiting on a distributor when your gate is down. Ghost Controls and Mighty Mule are more common on recently retrofitted gates. Whatever opener is on your post, our technicians have the training to service it on the first visit.
Common Gate Repair Problems We See in Everman Homes
- Posts that heave with the seasons. Everman sits on Houston Black clay. After heavy rain, the soil swells and pushes against footings. In drought, it contracts and leaves voids. The result is a post that leans noticeably more in August than it did in March.
- Latch posts pulled toward the gate frame. When the hinge post rocks, the whole gate panel shifts. The latch post gets pulled toward it over time. The homeowner replaces the latch, and it still will not catch. The real fix is resetting the hinge post.
- Obsolete opener boards that cannot support modern safety photocells. Pre-2000 control boards frequently lack inputs for the entrapment protection now required by UL 325. These gates still open and close, but they are not compliant. Retrofitting the board is often cheaper than a full operator replacement.
- Hinge weld failures on rusted steel tube frames. Everman’s summer heat above 100°F accelerates rust on uncoated steel. Weld points fail first. The gate sags, scrapes, and eventually snaps a hinge. Touching up the weld without resetting the post that caused the sag means doing the job again next year.
Pricing for Gate Repair in Everman, TX
Here is what you should expect to pay in Everman. A basic hinge replacement on a chain-link swing gate runs $95 to $180. Complete post reset with new concrete footing runs $325 to $575, depending on depth and whether we have to remove and rehang the gate panel. Gate realignment without post work is $120 to $220. Electric gate board replacement or retrofit ranges from $280 to $650, and a full operator swap usually lands between $750 and $1,500 installed. Every job gets an upfront price agreed before we turn a single bolt. We also offer $50 off any repair over $250, and a permanent 5% Senior and Veteran discount. Call (469) 564-8046 for an exact quote. Estimates are free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman and surrounding communities.
Older Everman gates that were hung before modern safety requirements often need more than a part. A post reset is usually cheaper than a second round of hardware. We will tell you which one yours needs. For Gate Repair across Everman, call Ironworks Gate Co. at (469) 564-8046. One call, an honest answer, and a written price before anything gets touched.
We serve all of Everman, including the neighborhoods off Wichita Street, Enon Avenue, and the streets around Johnson Park.
We Also Serve Cities Near Everman
Everman is our focus on this page, but we run crews to the surrounding towns every week. Homeowners in Burleson, Alvarado, Crowley, and Joshua call us for the same gate repair work. If you are in one of those communities and your gate is down, the same live phone line works: (469) 564-8046.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Everman
The post is moving, not the hinge. Everman’s Blackland Prairie clay shrinks and swells through wet and dry cycles, and original 1970s posts were set only 18 to 24 inches deep with minimal concrete. The hinge post is rocking in its original footing, which pulls the gate out of square and loads the new hinges until they fail again. The fix is resetting the post in a deeper, wider concrete collar. Once the post is stable, hinge replacement actually holds. Call (469) 564-8046 and we can check your post depth before you buy another set of hinges.
Often, yes, you can retrofit. Many older DoorKing and Mighty Mule operators have motor and arm assemblies that are still sound. The control board is the obsolete piece. We can install a modern board that supports UL 325 required safety photocells and edge sensors, keeping your existing motor in service. Costs run $280 to $650 for the board retrofit versus $750 to $1,500 for a full operator replacement. We will quote you both before any work starts so you can decide with real numbers.
Yes, it is normal for this soil, but it is not something to ignore. During extended dry spells, Houston Black clay contracts and pulls away from the post footing. The post loses lateral support and leans into the void, usually away from the house. When rains return, the soil swells and sometimes reseats the post enough that the lean looks better. But the footing is still shallow, and the cycle repeats until the gate won’t latch at all. A post reset with a 36-inch footing breaks that cycle permanently.
The post. By a wide margin. Most Everman gates were installed with original 18 to 24-inch footings that have been losing against clay movement for 50 years. Gate operators and hinges get blamed, but the mechanical root cause is almost always a post that has shifted. We fix the post first, then evaluate what the misalignment damaged. It saves you from paying for an operator or a hinge job that would fail again within a year or two.
Yes. Any automatic vehicular gate must comply with UL 325 entrapment protection standards, which means either a monitored safety edge or a non-contact device like photocells, plus a means of preventing the gate from closing on a vehicle. For residential gates, photocells across the gate opening and a vehicle loop detector on the driveway side are the standard setup. Older operators without these inputs can often be retrofitted with a new board. We will tell you exactly what your gate needs to be safe and compliant. Call (469) 564-8046 and our Gate Repair team will walk you through it.
If your gate is down, leaning, or just won’t behave, call (469) 564-8046. We answer live, every time. We will give you an honest diagnosis, an upfront price for the Everman repair, and a written 90-Day Done Right Promise on the work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman since our company’s founding in 1984.