Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across White Settlement
Gate parts and welding in White Settlement usually means one of three things: a hinge that’s torn loose, a post the clay soil has pushed out of plumb, or a frame that needs a welder’s hand to be square again. We handle all three, and we handle them same-week for most White Settlement homeowners. If your gate is sagging, dragging, or refusing to latch, call us at (469) 564-8046 and we’ll tell you straight what it needs and what it costs. Most jobs roll out with a single visit, an upfront price, and a written 90-Day Done Right Promise behind the work.
Ironworks Gate Co. has been doing gate work for over 42 years, and our Gate Parts & Welding team knows White Settlement’s gates better than most people know their own driveways. The homes out here, many of them built between the 1940s and 1970s for Carswell AFB families, carry original iron and chain-link gates that have seen decades of Texas weather. That’s not a problem for us. It’s just Tuesday.
Why Ironworks Gate Co. Is White Settlement’s Preferred Gate Parts & Welding Company
We’re not a handyman service that occasionally touches a gate. We’re a gate company. Welding is our trade. Parts are our inventory. And White Settlement is our backyard. Homeowners along Cherry Lane, up toward Silver Creek Road, and over by the neighborhoods near Bomber Road call us because we show up knowing what we’re looking at and we don’t treat a 60-year-old gate as a lost cause. We treat it as a job worth doing right.
White Settlement sits right next to NAS Fort Worth Joint Reserve Base, and that shapes the kind of customers we serve. Veterans, military families, and defense workers who take security seriously. They don’t want a patch job. They want a gate that closes true and stays closed. That’s why we stock heavy-gauge hinges, weld plates, and post steel sized for the legacy gates common around here, not just the lightweight hardware that big-box stores sell. When you call, a live person answers. A uniformed, background-checked technician comes out. And the price is settled before we turn a single bolt.
Every job carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork. No arguing. That’s the Keystone Standard, and it applies to a $200 hinge replacement or a full custom welding job.
Our Gate Parts & Welding Services in White Settlement
Hinge Replacement
Hinge failure is the most common call we get in White Settlement, and it’s rarely just a hinge. On a 1950s tubular steel gate, the original hinge was likely welded to a post that’s since shifted with the clay soil. We cut the old weld, reinforce the post face with a plate, and mount a heavier barrel or weld-on hinge that carries the gate’s full weight without sagging. A new hinge on an un-reinforced post just moves the failure point four inches down the post.
Post Replacement
White Settlement’s black clay soil expands when it’s wet and shrinks when it’s dry. A post set in a shallow footing gets pushed and pulled until it leans, twists, or cracks the concrete around its base. We dig out the old post, pour a footer that reaches below the active soil zone, and set a new post plumb and true. This is a permanent fix, and it’s the only kind we’ll do. In this neighborhood, a post replacement that doesn’t go deep enough is a post replacement we’ll be doing again in 18 months.
Rail Repair
Sagging top and bottom rails, cracked picket joints, and broken welds at the stiles are the classic fingerprints of a gate that’s been flexing in high wind for decades. We can repair the rail on almost any steel or iron gate, squaring the frame before rewelding so it hangs and swings like it’s supposed to. If a section is too far gone, we’ll re-fabricate a matching rail rather than leave a weakened splice that will crack again.
Custom Welding
This is the work we were built for. A heavy ornamental gate needs precision, not just heat. We weld structural joints with proper penetration, match new sections to the original ironwork where repairs are called for, and fabricate everything from complete custom gate frames to small brackets and strike plates. Victor Salinas leads our crew. His benchmark is simple: the weld should look like it belonged there in the first place. Whether you need a sag correction on a 1970s gate off Las Vegas Trail or a full custom walk gate built to match your existing fence, we’ll make it right and back it in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Settlement
If your gate has a motor on it, we likely have the parts on the truck. Our technicians are factory-trained and equipped across nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when a White Settlement customer’s gate operator fails, we’re not guessing and we’re not ordering parts from a catalog we’ve never opened before. We stock common boards, arms, and limit switches for the brands we see most often in the area, and most repairs are completed in a single visit. If you’re not sure what brand you have, call us and describe the operator. We’ll know it from the description.
Common Gate Parts & Welding Problems We See in White Settlement Homes
- Latch misalignment between seasons. The clay soil under your gate posts swells when it rains and shrinks in drought. A gate that latched fine in January may be a half-inch off by August. That’s not your latch failing. That’s your post moving. Post-reset and hinge adjustment are often a twice-yearly reality on White Settlement properties without deep footings.
- Weld fatigue at the hinge post. North Texas gets proper wind, and decades of a heavy gate slamming and flexing will crack the original factory weld at the hinge. We see this constantly on 1950s through 1970s iron gates in original condition. The fix is a reinforced plate and a proper weld, not a bolt-on strap.
- Shallow post footings. Many original installations in White Settlement poured footings only 18 to 24 inches deep. The active soil zone here runs deeper than that, which means the post effectively floats with the clay. We re-dig and pour deeper when we reset these, and the difference is immediate.
- Rotten bottom rails and pickets. Irrigation overspray, standing water after storms, and forty-plus years of ground contact take out the bottom rail on a lot of older gates. We cut out the rot-prone section and weld in new steel, then coat the repair to match.
Pricing for Gate Parts & Welding in White Settlement, TX
Here’s straight talk on what this costs. A hinge replacement on a standard residential swing gate in White Settlement typically runs $180 to $340, depending on the hinge style and whether the post needs reinforcement. Post replacement with a proper deepened footing runs $450 to $900, and that includes concrete, steel, and getting the gate re-hung and adjusted. Rail repair and sag correction range from $250 to $600, while custom welding is priced by scope: a small bracket or strike plate might be under $100, a full custom walk gate frame runs $1,200 to $3,500 depending on size and design. Every quote is written down and agreed to before work starts. You’ll never see a bigger number on the invoice than the one you approved. Call (469) 564-8046 for a free estimate, and remember: we offer $50 off any repair over $250 and a free second opinion on any written estimate.
We Also Serve Cities Near White Settlement
Ironworks Gate Co. serves the communities around White Settlement and throughout this corner of Tarrant and Johnson counties. Our crews regularly work in Burleson, Alvarado, Crowley, and Joshua, where the same clay soil and the same aging gates keep us busy. If you’re just outside White Settlement, give us a call. There’s a good chance we’ll be in your neighborhood this week.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in White Settlement
The expansive black clay soil under White Settlement swells when wet and shrinks hard during dry months, which moves your gate posts and changes the latch alignment. The gate itself isn’t failing. The ground it stands on is moving. The fix is resetting the post below the active soil zone with a deeper footing, or adjusting the hinges to compensate if the movement is minor. Call (469) 564-8046 and we’ll diagnose which one you need.
Yes. We match the new section to your existing frame material, profile, and spacing, then weld it in so the repair reads as original rather than patched. Victor Salinas has been doing exactly this for years, and the done promise applies: if the weld or the section fails within 90 days, we come back and fix it. For an exact quote on matching your existing ironwork, call us at (469) 564-8046.
A weld-on barrel hinge with a reinforced post plate beats a bolt-on hinge every time on White Settlement’s moving soil. The plate spreads the load across the post face and prevents the hinge from tearing loose when the post shifts. Bolt-on hinges concentrate stress at the fastener holes and pull out faster on a heavy gate. We’ll tell you honestly which hinge your gate and post can carry.
If your gate goes out of latch alignment twice a year, the footing is almost certainly too shallow. Anything less than 30 to 36 inches sits within the active soil zone and moves with the clay. We inspect the post during our estimate, and when we reset, we pour to depth. It’s the only way to stop the seasonal cycle. Schedule a free inspection by calling (469) 564-8046.
Yes, and in White Settlement this is often a better solution than rebuilding a swing gate on moving soil. A slide gate rides on track and rollers instead of pivoting on hinge posts, so post movement doesn’t affect latch alignment the same way. We’ll come out, measure the footprint, check your driveway grade and the soil conditions at the fence line, and price it out in writing.
Call Ironworks Gate Co. for Gate Parts & Welding in White Settlement
If your gate is sagging, dragging, not latching, or just tired after 50 years of Texas weather, call us. A live person answers, any hour, any day. We’ll set a time, show up on it, and give you a written price before any work starts. That’s the deal, and we’ve kept it for over 42 years. Call (469) 564-8046 for your free estimate. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving White Settlement and the surrounding communities.