Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Kennedale
Gate access control in Kennedale means keypads, remotes, phone entry, and card readers that have to work on properties a lot harder than the typical suburban lot. A keypad entry system in Kennedale usually runs $450 to $1,400 installed, depending on whether it’s standalone or tied into an existing slide or swing gate operator. Most repair calls we handle in ZIP 76060 are completed the same day the call comes in, and you’ll always talk to a live person at (469) 564-8046, any hour.
We know the land out here. Kennedale sits on Blackland Prairie clay that heaves hard through every wet-dry cycle, and that movement ends up inside your keypad, your hinge posts, and your loop detectors. It’s a different kind of gate work than what our techs see in Arlington or Fort Worth, and we’ve been sorting it out for over 42 years. When you call about a keypad that quit after a rainstorm or a remote that won’t trip the operator, the person on the other end already knows what you’re likely dealing with.
The pricing you hear on the phone is the price on the invoice. Always quoted, always agreed to before any work starts. That’s how Gate Access Control in Kennedale should work, and that’s the only way we do it.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Access Control Company
Homeowners across Kennedale call us because the work holds up. The company was founded in 1984 by Victor Salinas, and the same crew standard applies to every job we run: background-checked, uniformed technicians who treat your property the way they’d treat their own mother’s. We don’t send a different subcontractor every visit. When a Kennedale customer has a follow-up question about a video intercom we installed off W. Kennedale Parkway two years ago, we know the job.
Every completed job carries the 90-Day Done Right Promise. It’s written, it’s simple, and there’s no paperwork hoops or arguing: if something isn’t right, we come back and make it right, every time, on every job. We’re trained and equipped on nine gate-automation brands, including DoorKing, Elite, and Ghost Controls systems common around Kennedale’s horse properties and newer subdivisions. That means the correct fix usually happens on the first visit, not the third.
We also answer the phone. Live person, 24 hours a day, 7 days a week. No voicemail tree, no “we’ll call you Monday.” If your slide gate won’t open and you’ve got a trailer stuck on the wrong side, that matters. Our dispatch is coordinated from the Dallas-Fort Worth office, and crews reach most Kennedale addresses within about an hour for urgent gate access failures.
Our Gate Access Control Services in Kennedale
Keypad Entry
A keypad entry system in Kennedale typically runs $450 to $900 installed on a standard swing or slide gate operator. The common failure here isn’t the keypad electronics. It’s the post the keypad is mounted to. When Kennedale’s clay soil heaves after a wet winter and the post leans even a few degrees, the keypad cover traps rainwater against the circuit board and the buttons go dead. We mount keypads on posts set below the active clay zone, roughly 24 to 30 inches deep, so the entry point stops moving with the seasons.
Remote Control
Remote control repair and reprogramming in Kennedale runs $120 to $350 for most single-visit fixes. This covers transmitter programming, receiver module replacement, and antenna relocation. We see a lot of remotes that work fine at the end of the driveway but not from inside a truck. That’s usually an antenna or receiver issue, not the remote itself. For gate operators from Ghost Controls, DoorKing, and Elite, we carry the correct receiver hardware so we’re not ordering parts and rescheduling.
Phone Entry
Phone entry systems let you open the gate from a cell phone or a landline without a keypad or a remote. In Kennedale, these systems run $600 to $1,500 installed, depending on whether you need a cellular module or can tie into existing Wi-Fi at the gate. Solar-powered phone entry setups are common on Kennedale acreage where running power to the gate isn’t practical. The biggest seasonal problem we fix is under-charged batteries: in a North Texas summer, a solar panel angled for winter sun won’t keep the battery bank healthy, and the system goes dead after dusk. We angle and size panels for Kennedale’s actual sun path, not a chart from somewhere else.
Card Reader
Card reader systems in Kennedale run $500 to $1,200 installed for a single-vehicle setup. They’re a good fit for properties with multiple drivers, ranch staff, or boarding clients who need access at different hours without sharing a keypad code. We install readers that work with your existing opener brand, including Mighty Mule and DoorKing gate operators, so you’re not locked into one manufacturer’s ecosystem.
Every access control job in Kennedale starts with a close look at how the gate itself is behaving. A keypad, remote, or card reader can’t work reliably if the gate is dragging on caliche or the hinge post is out of plumb. We fix the access control and the gate as one system. That’s the only way it stays fixed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We carry parts and service experience for nine gate-automation brands, and around Kennedale the three we see most often are DoorKing, Elite, and Ghost Controls. DoorKing slide gate operators are common on the wider 2000s-era driveway entries, Elite swing operators show up on the ranch-style horse properties, and Ghost Controls systems are popular with owners who installed their own setup a few seasons back. Because we stock replacement boards, receivers, and edge sensors locally, most Kennedale repair jobs get done in one visit rather than two or three.
Common Gate Access Control Problems We See in Kennedale Homes
- Leaning posts that take the keypad with them. Clay soil heaves, the post tips, and a keypad that worked in October is dead by March. The cover traps moisture against the board, and the angle makes the keypad unreadable from the driveway anyway. The fix is a deeper footing and a re-leveled mount, not a new keypad every year.
- Loop detectors that lose calibration in shifting ground. A buried loop detector in Kennedale clay can drift as the soil expands and contracts, so your slide gate either won’t open when you pull up or starts closing on your truck bed. We recalibrate or replace the loop and adjust the operator’s force settings to match the actual gate weight.
- Solar battery banks that cook all summer. A solar gate opener battery at 105°F charges poorly and discharges fast. We see phone entry and remote systems that work fine at noon and fail after sunset because the panel angle or battery sizing was wrong for North Texas heat. We rebuild solar setups with heat-tolerant batteries and correct panel angles.
- Safety edges and photocells tripping on gates that don’t close square. When a heavy pipe-frame gate drops an inch at the latch end, the safety edge drags or the photocell beam gets blocked by a sagging gate leaf. The operator thinks something’s in the way and refuses to move. Straightening the gate frame and re-aiming the photo eyes solves most of these calls.
Pricing for Gate Access Control in Kennedale, TX
Here’s what we quote most often for Kennedale’s market, based on the gate types and access setups that dominate ZIP 76060:
- Keypad entry install (standalone or integrated): $450 - $900
- Remote control repair / reprogramming: $120 - $350
- Phone entry system install: $600 - $1,500
- Card reader install: $500 - $1,200
- Video intercom system install: $800 - $2,200
- Loop detector replacement / recalibration: $250 - $600
- Solar battery bank and panel correction: $180 - $500
Every price is quoted and agreed before a single bolt gets turned. A pipe-frame swing gate on a 1980s horse property off W. Kennedale Parkway will quote differently than a slide gate in a 2010s subdivision because the post footings, gate weight, and wiring are different jobs. The estimate is free. We also stand behind the work with the 90-Day Done Right Promise, and active offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Kennedale
Our Gate Access Control team works throughout the south DFW corridor and Tarrant County. If you’re in Arlington, Mansfield, Fort Worth, or Burleson and dealing with a dead keypad or a gate that won’t respond, we handle those calls the same way we do in Kennedale: live phone answer, honest quote, one-visit fix whenever possible. Call (469) 564-8046 and a person picks up.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Kennedale
Kennedale sits on Blackland Prairie clay that shrinks and swells dramatically with moisture changes. A post set in a shallow concrete footing, typically 12 to 18 inches deep, sits inside the active clay zone and gets pushed out of plumb every wet season. The permanent fix is removing the old post, drilling or digging to 24 to 30 inches below grade, and pouring a new footing below the active clay line. We do this work regularly across ZIP 76060, and it stops the annual lean-and-drag cycle for good. Call (469) 564-8046 and we’ll quote the footing rebuild, not just a temporary shim job.
Yes, if the panel angle and battery bank are sized for North Texas heat, not a generic chart. Kennedale summers routinely exceed 105°F, which shortens battery life and reduces charging efficiency. The panels and batteries we install for solar gate openers in Kennedale are heat-rated and angled for the actual sun path across Tarrant County. A properly built solar access system, even one supporting phone entry and remote control, should run reliably through every season. If your solar setup is dead by dusk, call (469) 564-8046 for a free on-site look.
The phone entry receiver is getting the signal, which means the access control side is fine. The problem is almost always the operator, the loop detector, or a safety sensor. On Kennedale’s clay-heavy soils, the loop detector is a prime suspect: ground shift knocks it out of calibration, and the operator won’t move because it thinks a vehicle is still on the loop. We’ll test the loop, the safety edges, and the operator in one visit and fix what’s actually wrong. Call (469) 564-8046 and we’ll have a live person on the line right away.
Moisture got into the keypad housing. In Kennedale, this usually happens because the keypad is mounted on a post that has leaned slightly and the cover no longer seals square against the backplate. Rain seeps in, shorts the board temporarily, and the system comes back once things dry out. That doesn’t mean it’s fine. The moisture will corrode the board eventually, and the next failure will be permanent. We’ll fix the post alignment, replace the gasket or the keypad if needed, and keep the circuit board dry. Call (469) 564-8046 for an exact quote; estimates are free.
Yes, and they apply to every automatic gate, including private driveway gates on horse properties in Kennedale. Automatic gate operators have to meet UL 325 entrapment protection requirements, which means working photocells or contact edges, correct force settings, and a properly functioning reversing mechanism. A gate that can crush a person against a post or trap a horse against the fence is a serious injury risk, and we’ve seen too many homemade pipe-frame setups that don’t meet the standard. Our gate access control work always includes checking and correcting safety devices to current code. Call (469) 564-8046 for an inspection and quote, and remember every quote is free and every job carries the 90-Day Done Right Promise.
Call Ironworks Gate Co. for Gate Access Control in Kennedale
If your keypad is dead, your remote won’t open the gate, or the whole system quits at the worst possible time, call us. You’ll get a live person at (469) 564-8046, not a voicemail. We’ll give you a straight answer on what’s wrong, what it costs, and when we can be there. Every quote is free, every price is agreed before work starts, and every job is backed in writing by the 90-Day Done Right Promise. Done right, and backed in writing. That’s how we work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale and the greater Dallas-Fort Worth metroplex since 1984.