Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Burleson
Gate access control in Burleson means keypads, remotes, phone entry, card readers, and video intercoms that work every single time – through July heat, February ice, and the ground-shifting clay that defines this corner of Johnson County. When a keypad dies at 6 a.m. and your car is stuck behind your own gate, you need someone who understands Burleson’s older subdivisions and the way black gumbo soil treats a gate post. We answer the phone live, 24 hours a day, at (469) 564-8046. Ironworks Gate Co. has spent more than 42 years doing exactly this work, and we’ll be there when we say.
Why Ironworks Gate Co. Is Burleson’s Preferred Gate Access Control Company
Burleson homeowners call us because we show up knowing the difference between a late-1990s wooden swing gate off Renfro Street and a new ornamental iron driveway gate in a master-planned community south of Hidden Creek. That local knowledge changes how we diagnose an access control problem. A keypad that worked all summer and fails after the first big rain isn’t usually a keypad problem at all – it’s a hinge post that moved in the clay. Most generalist repair outfits replace the keypad and leave. We find the real cause so you don’t pay for the same repair twice.
Every technician who comes to your Burleson home is background-checked and uniformed. They work under our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. No paperwork, no arguing. That promise applies to every keypad, receiver, intercom, and control board we touch. Victor Salinas, the owner, set that standard years ago and hasn’t lowered it once.
We’re dispatched from the Dallas-Fort Worth metro office, and our crews serve Burleson locally. Response time to most Burleson neighborhoods – from Old Town to the newer sections west of I-35W – runs one to two business days for scheduled access control work, with emergency service available around the clock when a gate won’t open at all.
Our Gate Access Control Services in Burleson
Keypad Entry
A keypad wired to an automated gate is the backbone of most Burleson driveways. Typical keypad entry system installation in Burleson runs $450-$850, including the keypad, wiring or wireless receiver, and programming. When we install a keypad on an existing opener, we check the gate’s physical alignment first – on Burleson’s clay, a keypad that “doesn’t work” is often a latch that won’t release because the post moved. We fix both.
Video Intercom
Video intercoms add a camera and two-way audio to your gate, so you can see and talk to whoever’s at the driveway from your phone or a wall-mounted monitor. Burleson homeowners in new construction along the city’s expanding edges ask for this most. A single-panel video intercom system with mobile app access typically runs $1,200-$2,800 in Burleson, depending on whether we’re wiring to an existing opener or installing a complete unit. Retrofitting video to an early-2000s gate is possible, but the age of the control board matters more than the age of the gate itself.
Phone Entry
Phone entry systems let a visitor press a button and have the system call your cell phone. You press a key to open the gate. Burleson uses this heavily on shared driveway gates and rural-style properties outside the city core, where the gate sits far from the house. A basic cellular phone entry unit installed in Burleson runs $850-$1,600. We can usually integrate these with existing openers, provided the opener’s control board has a dry-contact input.
Card Reader
Card readers make sense when several people need regular access – family members, contractors, landscapers. Each person gets a credential, and you can revoke it individually. Card reader access control in Burleson typically costs $600-$1,400 installed, depending on whether we’re adding a standalone unit or integrating with a telephone entry system. Most Burleson jobs we handle are standalone readers wired directly into the operator’s open input.
For a full look at everything we do, visit our Gate Access Control service page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burleson
Our technicians are trained and equipped on nine gate-automation brands, but the ones we see most often on Burleson driveways are LiftMaster, Ghost Controls, and DoorKing. We carry common parts and receivers for these systems on our trucks, which means we usually complete a Burleson access control repair in one visit. When a legacy Linear or Mighty Mule unit is still running, we service those too – and we’ll tell you honestly when an older board has reached the point where replacement costs less than another repair.
Common Gate Access Control Problems We See in Burleson Homes
- Keypads that fail after rain. Burleson’s black gumbo clay absorbs water and swells, pushing the hinge post out of plumb. The latch binds, the opener strains, and the keypad gets blamed. The keypad is rarely the root problem – the post is.
- Legacy control boards with no safety inputs. Many 1990s-era operators in older Burleson sections around Old Town lack ports for modern photocells and edge sensors. Adding a sensor often means replacing the operator, not just bolting on a part.
- Operators that reverse on hot, dry days. When clay dries and shrinks, the gate frame shifts. The safety loop detector in the driveway misreads the gate position, and the opener reverses mid-cycle even though nothing’s in the way. On 15-year-old slide gates, this is often a worn rack and pinion, not a programming issue.
- Warped wooden gates in pre-2000s subdivisions. Cedar-board gates that started sagging a decade ago eventually twist far enough to knock the magnetic lock or latch out of alignment, so the access control system works but the gate physically won’t open or close.
Pricing for Gate Access Control in Burleson, TX
Burleson access control pricing depends on what you’re adding and what’s already in the ground. Here are the ranges we quote most often in this market: keypad entry installation $450-$850, remote control receiver replacement $250-$500, phone entry system $850-$1,600, card reader $600-$1,400, and video intercom $1,200-$2,800. A full retrofit of an older Burleson gate – new operator, post refooting, keypad, and safety sensors – commonly lands between $3,500 and $6,500, depending on gate length and foundation condition. The price we quote is the price you pay. It’s agreed before a single bolt is turned. Call (469) 564-8046 and we’ll give you a free estimate with real numbers, not vague language.
Read more about what it’s like working with us on our Gate Access Control in Burleson local page.
We Also Serve Cities Near Burleson
Our crews cover Burleson and the surrounding areas, including Crowley, Joshua, Alvarado, and Kennedale. If you’re a few miles down the road, the same live phone support and 90-Day Done Right Promise apply. We schedule access control work throughout southern Tarrant and northern Johnson counties every week.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Burleson
Because the clay under your gate post absorbed water and swelled, pushing the post out of plumb. That binds the latch or hinges, and the opener fights the gate until something gives – often the keypad gets blamed when the real issue is a shifted post. The fix is refooting the post to a proper depth, then realigning the gate so the keypad and opener work together again. Call (469) 564-8046 and we’ll confirm the cause on site before quoting anything.
Sometimes yes, but the control board in the operator decides it. Operators from the early 2000s often lack a dry-contact input for an external device, which means the intercom can’t trigger the opener. If your operator has that input, we can wire a video intercom to it. If it doesn’t, you’re looking at a board upgrade or a full operator replacement – and we’ll show you both options with honest numbers before any work begins.
Heat dries out Burleson’s clay soil, which shrinks and lets the gate frame shift slightly. That shift moves the gate away from its closing limit position, confusing the operator’s internal logic. The opener reverses because it thinks it hit an obstruction. For slide gates, a worn rack and pinion can cause the same symptom. We check both the physical gate position and the drive components. Call (469) 564-8046 for a free estimate and we’ll pinpoint the cause in one visit.
If the rack and pinion are the only worn parts, repairing them usually costs less than half of a new operator install – roughly $400-$800 for a typical Burleson driveway. But if that 15-year-old operator has also lost its control board or the safety inputs are obsolete, you’re better off replacing the whole unit. We won’t push you toward replacement when a repair makes more sense. We’ll show you the numbers for both and let you decide.
For low-voltage access control wiring – keypads, phone entry, card readers, and video intercoms – Johnson County and the city of Burleson generally do not require an electrical permit, since these systems run on 12-24 volts. If the job requires new line-voltage power from your house to the gate operator, a permit may apply. We’ll tell you during the estimate whether your specific project needs one. Call (469) 564-8046 and we’ll walk you through it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burleson and the surrounding area. Founded in 1984, with the 90-Day Done Right Promise on every job.