Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Motor & Opener in Burleson: Repairs That Hold Through the Clay Seasons
Gate motor and opener problems in Burleson usually trace back to one thing: the black gumbo clay under your posts. When the soil heaves, your gate gets pulled out of plumb, the drive gears bind, and the motor burns out trying to push against a frame that no longer lines up. A typical gate motor repair in Burleson runs $275-$595, and a full opener replacement with new hardware usually lands between $1,200 and $2,600 depending on the gate size and brand. We finish most Burleson motor repairs in one visit, and every job is quoted and agreed before we turn a single bolt. Call (469) 564-8046 when your opener starts grinding or the gate shudders instead of swinging.
Our Gate Motor & Opener team has spent years working driveways across Burleson, from the newer ornamental iron gates off Alsbury Boulevard to the cedar-post swing gates in the established neighborhoods around Irene Street. We know what these motors do when the clay moves. That local knowledge is the difference between a repair that holds and one that fails again next wet season.
Why Ironworks Gate Co. Is Burleson’s Preferred Gate Motor & Opener Company
We’ve been fixing and installing gate automation since 1984, and we keep a written 90-Day Done Right Promise on every job in Burleson. If something isn’t right, we come back and make it right. No paperwork, no arguing. Victor Salinas leads our team, and he’s the one who answers when there’s a question about a quote or a repair detail. Burleson homeowners have told us that’s rare enough to matter.
Our technicians arrive in uniform and background-checked, and they work by a simple code: Krafted right, Every time, Your home first, Standing behind it. That 400th job gets the same care as the first. When you call about a dead gate motor, a live person picks up the phone. That’s true at 2 in the afternoon and at 2 in the morning, 24 hours a day, 7 days a week.
Most Burleson gate motor jobs are completed in a single visit. We stock the wear parts these openers need right on the truck: gears, limit switches, capacitors, photocells, and control boards for the brands you’ll actually find on Burleson driveways. If a motor is too far gone, we’ll quote you a replacement before any work starts, so the number you see is the number you pay.
This is Gate Motor & Opener in Burleson work the way it should be done: a square deal, an upfront price, and a guarantee in writing.
Our Gate Motor & Opener Services in Burleson
Motor Repair
When a Burleson gate opener is grinding, humming without moving, or tripping a breaker, it’s usually a drive gear stripped against a binding frame or a control board that’s taken one power surge too many. We diagnose on the spot, show you exactly what failed, and give you a firm price before we replace anything. Most motor repairs in Burleson are done the same visit.
Motor Installation
A new opener only works as well as the gate it’s mounted on. In Burleson, that means checking the post footings before Gate Installation in Burleson begins. If the clay has moved a post even half an inch out of plumb, the smoothest motor on the market will struggle and fail early. We set the footing, true the gate, and then install an opener sized to the gate’s weight and swing. On larger properties off Chisholm Trail Parkway with solid infill gates, wind load is a real factor, so we spec motors with enough torque for a north Texas storm front.
Linear Motor
Linear arm openers are common on the ranch-style and craftsman homes across Burleson. They’re a good fit for the modest driveway gates in neighborhoods off Wilshire Boulevard, but they’re sensitive to post movement. When the gate sags even slightly, the linear arm fights the geometry and the gear assembly eats itself. We replace stripped gears, re-bush the arm pivot, and re-level the gate as part of Burleson Gate Repair so the motor isn’t working against gravity every cycle.
Slide Motor
Slide gate motors on Burleson acreage properties face a particular challenge: the clay under the V-track or rack will shift, and suddenly the gate is dragging instead of rolling. That drag burns out limit switches and overheats the motor. We inspect the entire rail system, reset the rack alignment, and rebuild the footing under the track if the clay has heaved it. A slide gate that won’t roll is a driveway you can’t use, which is why we make these calls a priority.
Battery Backup
Power outages in Burleson are a fact of life. Severe storms, hail events, and the occasional grid load issue all knock out power at the worst possible time: when you need to get a car out of the driveway. A battery backup keeps your slide or swing gate operating through an outage. We install and service battery backup systems sized to your opener, and we test them under load so you know they’ll actually work when the lights go out.
Intercom Integration
Many Burleson homeowners pair their gate opener with an intercom or entry system at the driveway. We integrate your opener motor with the intercom so that when the call comes through, the gate opens on demand. We wire it cleanly, weather-proof the connections, and test the whole loop: call box, relay, motor, and safety edge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burleson
We’re trained and equipped on nine gate-automation brands, and three you’ll see often in Burleson are LiftMaster, Ghost Controls service in Burleson, and Mighty Mule. We stock replacement gears, limit switches, and control boards for these brands locally, which means a repair on a Tuesday afternoon usually gets finished that same day, not ordered and waiting. Some of our techs also carry parts for FAAC, BFT, Linear, Viking, DoorKing, and Elite. Whatever’s on the driveway, we’ll have the right fix on the truck.
Common Gate Motor & Opener Problems We See in Burleson Homes
- Stripped drive gears after a wet season. Burleson’s black gumbo clay swells in fall and winter rains, pushing posts out of plumb. The gate frame twists, the motor pushes against a bind, and the gear strips. If the footing isn’t addressed, the replacement gear will strip the same way within a season or two.
- Photocell faults after rain. When clay heaves under the gate, the safety photo-eyes fall out of alignment, and the opener refuses to close or reverses constantly. It’s rarely a faulty sensor; the problem is the gate moved. We re-true the gate and re-aim the photo-eyes, then test through a full cycle.
- Slide gate dragging or grinding. On Burleson’s expanding south side, slide gates sit on tracks that follow the ground. A dry summer can drop the track several inches, then a wet winter swells the clay and pushes it back up, bending the rack and binding the chain drive.
- Dead opener after a storm. A power surge from a lightning strike or a sudden outage can fry a control board or trip an internal breaker. If the gate’s stuck closed, look for a manual release. If you’re unsure where it is, call us; a live person answers, day or night.
Pricing for Gate Motor & Opener in Burleson, TX
Here’s what Burleson homeowners can expect to pay, based on work we’ve done across the city:
| Service | Typical Burleson Price Range |
|---|---|
| Gate motor diagnosis & minor repair | $120-$240 |
| Drive gear replacement | $275-$450 |
| Slide motor repair (including rail adjustment) | $325-$595 |
| Full opener replacement (single swing gate) | $1,200-$2,100 |
| Full opener replacement (slide gate) | $1,500-$2,600 |
| Battery backup installation | $450-$850 |
| Post refooting (clay-heave remediation) | $550-$1,100 |
These ranges cover the typical Burleson driveway gate. A solid infill gate with high wind exposure will be on the higher end because the motor has to work harder. The quote you get is the price you pay, agreed before work begins. We also offer a $50 discount on any repair over $250, a free second opinion on any written estimate, and a seasonal tune-up for $89. Veterans and seniors get a permanent 5% discount.
One thing worth stating plainly: if your gate post is out of plumb, replacing the motor without fixing the footing is wasted money. The new motor will fail just like the old one. We’ll tell you that before you spend a dollar.
We Also Serve Cities Near Burleson
If you’re in Burleson or just outside the city limits, we cover the surrounding areas too. Our crews regularly run to Crowley, Joshua, Alvarado, and Kennedale for gate motor and opener work. Same upfront pricing, same written 90-Day Done Right Promise, same live person on the phone.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Burleson
Because your gate post is moving with the clay. Burleson sits on expansive black gumbo soil that swells and shrinks dramatically with the drought-to-rain cycle. When the clay swells in the wet season, your gate post heaves out of plumb, the gate frame twists, and the opener motor turns against that bind until the drive gear strips. The only permanent fix is to re-set the footing and true the gate before replacing the gear. Call (469) 564-8046 for an exact quote, including footing work if we find the post has moved.
Yes, every slide gate opener has a manual release, usually a lever or chain near the motor head. On LiftMaster and Ghost Controls units, look for a small lever or pull-chain that disengages the motor from the rack, letting you push the gate by hand. If the mechanism is damaged, we can source our Gate Parts & Welding in Burleson to fix it. If you can’t find it, call us. A live person answers 24/7 at (469) 564-8046 and can walk you through the release or dispatch a tech to Burleson right away.
In Burleson, a gate post with an opener mounted on it should sit in a footing at least 24 inches deep and 12 inches in diameter, poured with a concrete bell at the bottom. That depth gets the post below the zone where the clay heaves and shrinks most. The shallow footings typical of the 1980s and 1990s homes near Old Town Burleson are rarely deeper than 18 inches, and that’s why so many gates in those blocks are visibly out of plumb now.
It often is. When the clay swells, the gate post shifts and the photo-eyes fall out of alignment. When the photo-eyes can’t see each other, the opener thinks something is in the gate path and refuses to close. It’s not a faulty sensor; it’s a gate that’s moved. We re-true the gate, re-seat the post if needed, and re-aim the photo-eyes so they hold through the next wet cycle.
You can, with the right panel sizing and a quality battery. North Texas has plenty of sun, but the problem is swing gate weight and storm wind load. A solid infill gate catches the wind like a sail, and an under-spec solar opener won’t have the torque to push it against a storm front. We size solar systems for the actual gate dimensions and Burleson’s wind exposure so the motor doesn’t stall when the weather turns.
Written by Victor Salinas, Owner at Ironworks Gate Co. Gate automation done right in Burleson, backed by a written 90-Day Done Right Promise.