Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cleburne
Most gate repairs in Cleburne come down to one thing: the Blackland Prairie clay under your posts. It heaves when it rains and contracts when it dries, and that slow, steady movement is what pulls hinges out of alignment and makes a gate drag or refuse to latch. We send crews into Cleburne every week for exactly this kind of work, and we’ve seen how these specific soils behave across the 76031 and 76033 ZIP codes for years. If your gate is binding, leaning, or the opener is fighting the frame, call (469) 564-8046 and we’ll get someone out to look at it.
Why Ironworks Gate Co. Is Cleburne’s Preferred Gate Repair Company
Cleburne is a town where people still check a company’s reputation before they make the call. We’ve earned ours the slow way, one gate at a time, over 42 years in business. Homeowners here tend to know their neighbors and they talk. When we fix a sagging ranch gate off Nolan River Road or get an ornamental driveway gate in the Belclaire subdivision swinging true again, word gets around. The work holds up because we address the post and the footing, not just the hinge.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands so the correct fix happens on the first visit. That matters in Cleburne because a wrong diagnosis on an operator means another week of a gate that won’t close, and out here a gate that won’t close is not just an inconvenience. It’s a security gap on a property where the next neighbor might be a quarter mile away. Victor Salinas, our owner, built this company on a simple rule: stand behind the work. Every job is covered by our written 90-Day Done Right Promise.
Key Takeaways
- Cleburne’s expansive clay soil is the root cause of most gate failures we fix here.
- We service both ornamental iron driveway gates and heavy ranch and livestock gates.
- Live phone support, 24 hours a day, 7 days a week. A person answers, not a voicemail.
- Every repair is backed by a written 90-Day Done Right Promise.
Our Gate Repair Services in Cleburne
Electric Gate Repair
Electric and solar-powered gate operators take the brunt of Cleburne’s weather swings. Summer heat bakes the control boards, and the ice storms that sweep through this corridor crack operator housings that were already stressed. We diagnose and repair or replace openers from Ghost Controls, DoorKing, Elite, Mighty Mule, and five other major brands. If your keypad works but the gate won’t move, call us before you start replacing parts. Most of the time it’s a limit switch, a battery, or a wiring connection, and we can usually fix it in a single visit.
Automatic Gate Repair
Automatic gates around Cleburne’s expanding edge, especially the newer subdivisions in the 76033 corridor, are mostly swing and slide gates paired with entry keypads. When the clay shifts under a post, the operator’s sensor alignment goes with it, and the gate starts reversing mid-cycle or stopping entirely. We reset the post, re-square the gate, and recalibrate the operator so it cycles cleanly. No guessing. No repeat trips for the same problem.
Hinge & Post Repair
Here’s what we see on the acreage properties ringing Cleburne’s city limits: a heavy schedule-40 pipe gate hung on driven pipe, and within a season or two the black clay has pushed that post inches out of plumb. The gate binds on the latch side and someone has to lift it to close it. Digging out the old footing and doing it right is the only fix that lasts. Replacing the hinge without addressing the post is how you end up calling another gate company in six months after we leave. We’d rather do it once.
Gate Realignment
A gate that scrapes the ground or won’t latch usually has a post problem, not a panel problem. In Cleburne, the wet-dry cycle means gates are constantly moving out of true. We re-hang the gate on a properly plumb post, adjust the hinge placement for the gate’s weight, and check the latch alignment so it closes with a clean throw. For homes in the historic district near downtown, where some of the gates still on those older craftsman and Victorian homes carry real ornamental iron, the work takes a defter hand. That’s the kind of gate you don’t want a generalist swinging a grinder at.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cleburne
We’re factory-trained on the operators most common around Cleburne, including Ghost Controls for the solar setups we see on rural properties and DoorKing, Elite, and Mighty Mule for residential and agricultural installs. Our Gate Repair technicians keep common boards, batteries, and limit switches stocked on the truck, which means most Cleburne jobs are completed in one visit. When we do need a specialty part, our Dallas-Fort Worth office coordinates the order and a crew brings it to your driveway.
Common Gate Repair Problems We See in Cleburne Homes
- Post heave from Blackland Prairie clay. The soil swells when wet and contracts in drought, pushing driven pipe and T-posts out of plumb, binding the gate on the latch side. This is the number one repair we do in both Cleburne ZIP codes.
- Operator damage from ice storms. Cleburne sits in a corridor that catches more ice than the DFW core, and a hard freeze cracks operator housings and snaps stressed ornamental welds.
- Hinge-post failure on ranch gates. Heavy schedule-40 gates put all their weight on the hinge post. When that post leans, the gate sags, and no amount of latch adjustment fixes it until the post is reset.
- Wiring and battery issues on solar openers. Long rural driveways in Cleburne often run solar because running mains power to the gate costs more than the opener. When the battery is old or the panel is shaded, the gate works intermittently.
Pricing for Gate Repair in Cleburne, TX
We quote Cleburne jobs the same way every time: upfront, in writing, before a single bolt gets turned. A basic gate realignment or hinge adjustment in Cleburne typically runs $150 to $300 depending on gate weight and post condition. Post re-setting with concrete footings usually falls between $250 and $600 per post. Electric operator repairs range from $180 for a simple limit switch or photo-eye fix to $450 to $900 for a full control board or motor replacement. A complete gate panel rebuild with new hinges, latch, and alignment on a wide ranch gate generally lands between $500 and $1,200. You get the price before we start, and it’s the price on the invoice. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and a standing 5% discount for seniors and veterans. Call (469) 564-8046 and we’ll give you a firm number.
We Also Serve Cities Near Cleburne
Our crews run regular routes through Cleburne and the surrounding communities, including Keene, Joshua, Alvarado, and Burleson. Whether you’re on a ranch road outside town or in a subdivision just south of the Johnson County line, the same crews and the same 90-Day Done Right Promise apply. If you’re in one of these nearby cities and your gate is down, call us and we’ll get you scheduled.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Cleburne
Cleburne sits directly on Blackland Prairie clay, which is among the most expansive soils in Texas. The repeated wet-dry cycle swells the clay and then contracts it, pushing driven pipe and T-posts out of plumb, sometimes by inches within a single season. In fully developed suburban areas like Burleson or Midlothian, the ground has typically been compacted and graded for decades, so posts move far less. Here, the fix is to reset the post in a deeper concrete footing with a wider bell bottom, which anchors it below the active clay zone. Call (469) 564-8046 and we’ll assess your posts before they get worse.
Yes, and this is one of the most common requests we get for acreage properties around Cleburne’s outskirts, where running mains power to a gate 300 feet from the house gets expensive. We install solar kits from Ghost Controls and Mighty Mule sized to the gate’s weight and number of daily cycles, with a properly positioned panel and a battery bank sized for cloudy weeks. If you have an existing automatic gate that was working and now isn’t, we’ll test the panel output and battery health before recommending anything. Estimates are free.
For a heavy schedule-40 pipe gate on a ranch or acreage property, we recommend heavy-duty adjustable strap hinges or barrel hinges with grease fittings, mounted to a post that has been set in concrete with a bell-bottom footing. The hinge itself matters less than the post it’s mounted to. In Cleburne’s clay, no hinge will hold alignment if the post is just driven into the ground. We size hinges to the gate’s weight and span, and we set the post so the hinge side stays plumb through the wet-dry cycle.
That reversal is usually the operator’s obstruction sensor misreading the gate’s movement as it drags or binds. When Cleburne’s clay gets wet in winter, the soil swells and the gate moves slightly, throwing off the limit switches and photo-eye alignment. The operator thinks something is in the way and reverses. Sometimes cold temperatures also thicken the grease in older operators, adding resistance. We re-align the gate, recalibrate the limits, and check the force settings. Most of these are single-visit repairs, and we’ll give you the exact price before we start.
We do both. Cleburne is a town with a foot in each world: ornamental iron driveway gates on the newer tracts around the 76033 corridor, and heavy tubular steel livestock gates on the ranch roads and acreages that ring the city. Our shop does the welding, hinge work, and post-setting for both, and we carry the openers and access hardware that fit each setting. A gate that has to keep cattle in is no less important than the one that keeps your driveway private. We take both seriously. Call (469) 564-8046 for a free estimate.
Get Your Cleburne Gate Fixed Right
If your gate is leaning, dragging, or the opener quit, don’t wait for the next rain to make it worse. Call Ironworks Gate Co. at (469) 564-8046. A live person answers, day or night. We’ll schedule a time that works, show up when we say we will, and give you a written price before any work begins. Then we stand behind it with the 90-Day Done Right Promise. The company that makes a 40-year-old gate close like the day it was hung.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Cleburne and the surrounding area since 1984.