Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Crowley
A new driveway or estate gate in Crowley, TX typically costs $2,800 to $9,500 depending on material, automation, and whether your property needs a post-reset or new power run. Most installations we schedule in Crowley are completed within one to two weeks, measured and quoted before any work begins. If you live off FM 1187, anywhere near the Deer Creek Elementary attendance zone, or in a newer subdivision like Silver Leaf or the Creeks of Crowley, we know exactly what your soil, your HOA, and your existing builder-grade setup will demand. Call (469) 564-8046 for a free measure and a written quote.
Why Ironworks Gate Co. Is Crowley’s Preferred Gate Installation Company
Crowley sits at a live rural-to-suburb transition edge in south Tarrant County, and that means gate technicians here service both legacy ranch-style pipe and tube-steel gates on older acreage lots and brand-new automatic ornamental iron gates in HOA master-planned communities, often on the same street. Our crew has pulled through the same neighborhoods for over four decades, and we have watched the 2000s-era subdivisions age into their first full hardware replacement cycle. Victor Salinas leads every Crowley job with the same standard: the gate should close like the day it was hung, and the work should be backed in writing.
That written backing is the 90-Day Done Right Promise. If something is not right within 90 days of installation, we come back and make it right. No paperwork, no arguing. Crowley homeowners who call us tend to be done with contractors who overpromise and underdeliver. Our position is simple: a square deal, upfront price, no surprises on the bill.
Response time to Crowley is straightforward. Dispatch and scheduling run from our Dallas-Fort Worth office, and a live person answers every call, 24 hours a day, 7 days a week. When your gate fails, you do not get a voicemail tree. You get a person, and that person can usually get a technician to a Crowley address the same day for emergency repair work.
Our Gate Installation Services in Crowley
We handle the full scope of driveway and estate gate work, from raw steel fabrication through automation and access control. On this page, the focus is installation, but you should know we are the same crew that will be back for tune-ups and repairs years down the road. We do not install and disappear.
Driveway Gate Installation
A new automatic driveway gate in Crowley runs from roughly $4,200 for a basic steel single swing gate with one operator, up to $12,000 or more for a custom double-leaf estate gate with full automation, safety photocells, and keypad entry. The bigger variable in Crowley is not the gate itself. It is what lies underneath it. The Expansive Vertisol clay here moves every season, and we will not set a driveway gate on shallow footings that will fail in 18 months. Expect deeper post holes, more concrete, and a plan for drainage.
Pedestrian Gate Installation
Pedestrian gates in Crowley are often the forgotten second gate, especially in older acreage homes where the pedestrian entry was built as an afterthought. We install matching pedestrian gates that fit the style of your main driveway gate, with self-closing hinges and optional keypad or intercom access. Budget $900 to $2,800 for a standard steel pedestrian gate installed, depending on height, width, and whether we are adding an electric strike or automation.
Sliding Gate Installation
Sliding gates make sense on Crowley properties where the driveway slopes upward from the street or where a swing gate would block traffic or a sidewalk. A cantilever sliding gate with automation typically starts around $5,500 and runs to $11,000 for heavier steel-framed panels. Clay soil heave affects sliding gates differently than swing gates: the track or rail must be set on a stable pad, or the gate bounces and jams. We pour for stability and set the operator on a solid base, not on soil that will move in the next wet spring.
Swing Gate Installation
Swing gates are the most common type we install in Crowley’s HOA subdivisions, especially the double-leaf ornamental iron gates that came standard on many 2000s-built homes. New swing gate installation here runs $3,500 to $9,000, with the cost driven by leaf count, automation brand, and whether we need to trench conduit for power and loop detectors. This is where Crowley’s clay soil matters most: a swing gate post set without enough depth will tilt within one rainy season. We over-dig and over-pour on every swing gate post.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crowley
We are trained and equipped on nine gate-automation brands, including DoorKing, Elite, Ghost Controls, and Mighty Mule, plus LiftMaster, FAAC, BFT, Linear, and Viking. That matters in Crowley because many of the builder-grade operators installed in the 2000s subdivisions are reaching end of life at the same time. When a homeowner calls about a dead opener, we do not have to research the unit for half the morning. We know it, and we commonly have the part or the replacement on the truck. Most installation jobs are completed in a single visit, with no-hassle upfront pricing settled before a single bolt is turned.
Common Gate Installation Problems We See in Crowley Homes
- Builder-grade operators failing in waves. The automatic gate operators installed in 2000s-era HOA subdivisions were often the cheapest unit that met the minimum spec. Two decades later, they are failing simultaneously across dozens of communities. If your gate works intermittently or shudders to a stop, the operator was never built to last this long.
- No power or conduit run to the gate. Builders frequently skipped running electrical conduit to the gate location, assuming the homeowner would never automate. When a homeowner wants a new automatic gate on that spot, we have to trench or surface-mount conduit. This is a normal part of a Crowley installation, and our quote covers it.
- Posts tilting out of plumb within one season. Crowley’s North Texas Vertisol clay expands during spring rains and contracts hard in summer drought. That cycle pushes shallow-set posts right out of alignment. A new gate installed on inadequate footings can look right for six months, then sag and bind. We use deeper, reinforced footings sized for this soil, not soil in Dallas.
- Ranch gates without a permit record. On Crowley’s rural fringe, landowners who are subdividing or selling to developers frequently discover their existing pipe gates predate any permit record. Those gates must be replaced with code-compliant automatic systems as a condition of sale or development. We handle that full replacement, including the UL 325 safety components and any required inspection support.
Pricing for Gate Installation in Crowley, TX
Here are honest ranges for Crowley’s market, based on what we quote and install here week to week:
- Pedestrian gate installation: $900 to $2,800
- Single swing driveway gate with automation: $3,500 to $6,500
- Double swing gate with automation: $5,000 to $12,000
- Sliding gate with automation: $5,500 to $11,000
- Adding automation and power run to an existing manual gate: $1,800 to $4,200
- Post reset and footing reinforcement: $600 to $1,800 per post
Every quote is a fixed written price, agreed before work starts. That means the number on the quote is the number on the bill. We do not “discover” extra line items halfway through a job. If we find a problem during installation, we stop, show you, and get your sign-off before spending another dollar. Estimates are free. Call (469) 564-8046 to schedule a measure.
Standing offers for our Crowley customers: $50 off any repair over $250, free second opinion on any written estimate, a $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Mention any of these when you call.
We Also Serve Cities Near Crowley
Our Gate Installation team works throughout south Tarrant County, from the acreage lots in Crowley to nearby Burleson, Joshua, Kennedale, and Fort Worth. If you are just outside the city line, call us anyway. We cover the surrounding communities with the same response time and the same written guarantee.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Crowley
Crowley’s Expansive Vertisol clay expands aggressively during spring rains and contracts hard during summer drought, and that seasonal heave cycle tilts any gate post that was not set on deep, reinforced footings. A post set at the minimum depth will lean out of plumb within twelve months, and the gate will sag and bind. We over-size our footings on every swing gate install in this soil specifically to avoid that callback. Call (469) 564-8046 if a recent install is tilting; we will assess it honestly and quote the re-set before any work begins.
Yes, and this is one of the most common jobs we do in Crowley’s 2000s-era HOA subdivisions. The catch is that most of those gates were built without a conduit or power run to the gate location. We trench for the wiring, install the operator, and add safety photocells and an entry keypad to meet UL 325. A typical automation retrofit on an existing manual gate in Crowley runs $1,800 to $4,200. The price is quoted and agreed before we start.
Ice storms freeze the moving components and send voltage spikes through operator boards that were never sealed against moisture ingress. Limit switches and control boards are the two most common casualties. We recommend an operator with a sealed, weather-rated control housing for any Crowley install, and we can add a surge suppressor at the power source. The Fort Worth corridor gets more frequent ice events than the Dallas side of DFW, and we build for that.
On Crowley’s rural fringe, many legacy pipe gates predate any permit record and were never built to current code for automated operation. When a property is subdivided or sold to a developer, the gate must be brought up to code, including UL 325 safety components like photocells and reversing edges. A full replacement with a code-compliant automatic system typically starts around $5,500. We handle the entire job, including the paperwork.
A swing gate with deep-set, over-poured concrete footings is the most forgiving on expansive clay, because the entire weight of the gate hangs from posts that are anchored below the active soil zone. Sliding gates work too, but the track or rail must sit on a poured pad, not on soil that will heave. For most Crowley lots, a well-drained swing gate with heavy-duty hinges is the most durable choice, and it is what we recommend for the majority of our installations here. Call (469) 564-8046 for an exact recommendation based on your property.
Call Ironworks Gate Co. for Gate Installation in Crowley
If your gate is sagging, dead, or simply outdated, we will come out, take measurements, and write you a fixed price. No obligation, no pressure, and the quote is free. A live person answers at (469) 564-8046, 24 hours a day, 7 days a week. Call us today, and let us get your gate done right and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Crowley, TX and surrounding Tarrant County communities.