Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fort Worth
Gate repair in Fort Worth is a job that punishes shortcuts. The soil shifts, the heat bakes powder coat off hinges, and ice storms freeze operators solid. We’re Ironworks Gate Co., and we’ve spent over 42 years learning exactly how Fort Worth’s clay soil, sun, and weather cycles work against driveway gates, so we can set them right and keep them right. If your gate drags, won’t latch, or the opener stopped responding, call (469) 564-8046. A real person answers, day or night, and we’ll schedule a Fort Worth technician to get your gate operating again.
Why Ironworks Gate Co. Is Fort Worth’s Preferred Gate Repair Company
Most Fort Worth homeowners call us after a gate has already failed twice. They’ve had a handyman adjust hinges, maybe swap a sensor, and the gate worked for a month. Then the same problem came back. That’s because the underlying issue in most Fort Worth gate failures isn’t the hinge or the sensor. It’s the soil under the post, the shifted brick column, or a worn gear in the operator that was never diagnosed. We don’t patch symptoms at Ironworks Gate Co. We find the cause, explain it in plain terms, and fix it so the repair holds.
Victor Salinas leads our Fort Worth crews, and he’s the first to tell a homeowner when a repair isn’t worth making. That candor is why our Fort Worth customers keep our number saved. We’re fully licensed and insured, our technicians are background-checked and uniformed, and every job includes our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions. And we answer the phone 24 hours a day, 7 days a week. Not a voicemail. A person.
We work across 76101, 76102, and 76103, from Ryan Place to the north Fort Worth Alliance corridor. We know the narrow shared driveways in Fairmount. We know the estate gates with horse trailers behind them off Crowley Road. Local knowledge isn’t a marketing phrase for us. It’s the difference between a two-hour repair and a two-visit headache.
Our Gate Repair Services in Fort Worth
Electric Gate Repair
Electric gate repair in Fort Worth usually comes down to three things: a dead control board, a failed safety sensor, or a motor that overheated and tripped its thermal cutoff. Fort Worth summers push heat indices past 110°F, and a black iron gate baking in full sun can force an exposed operator to thermal shutdown. We carry control boards, sensors, and replacement motors for LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule on our Fort Worth trucks, so most electric gate repairs are finished in one visit.
Automatic Gate Repair
Automatic gate repair in Fort Worth has a rhythm. The February 2021 ice storm froze slide gate rack and pinion systems across the metro and shattered wooden gate boards on older properties. Similar events hit every few years. When an automatic gate fails after a freeze, we don’t just replace the damaged part. We check the entire drive system for hairline cracks, water intrusion into the gearbox, and stress on the mounting brackets, because a repair that ignores those hidden failures won’t survive the next North Texas ice event.
Hinge & Post Repair
This is the repair most specific to Fort Worth’s geology. The city sits on Blackland Prairie shrink-swell clay. When it rains, this clay absorbs water and heaves upward. When it dries, it shrinks and pulls away. A hinge post set in that soil moves with it, and the gate that once latched clean starts to drag, bind, or fail to close at all. We reset posts with deeper footings, repair cracked mortar in brick columns, and replace worn hinge pins and bearings. If we repair a hinge on a post that’s still moving, we’ve done nothing but buy time. So we fix the post first, every time.
Gate Realignment
Gate realignment in Fort Worth often reveals a deeper problem. A sagging gate may look like a hinge issue, but in neighborhoods like Mistletoe Heights and Ryan Place, we regularly find the hinge post has shifted inside a cracked brick column. Decades of clay-soil movement have opened the mortar joints, and the column itself is out of plumb. Our approach is to secure the column, reset the post, then rehang the gate so it swings clean and latches without forcing. A gate aligned this way will stay true through wet and dry seasons.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
We’re trained and equipped on nine gate-automation brands, so whatever is mounted on your Fort Worth driveway, we can service it: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common parts for DoorKing, Elite, and Ghost Controls systems stocked locally for Fort Worth customers, because waiting a week for a control board to ship is a week your gate doesn’t work. When a part isn’t on the truck, we source it through our Dallas-Fort Worth supply network and get your repair scheduled as soon as it arrives.
Common Gate Repair Problems We See in Fort Worth Homes
- Post heaving from Blackland Prairie clay. After a wet spell, the clay under a post footing swells and lifts the hinge post, dragging the gate against the driveway. When the clay dries, the post sinks and the gate won’t latch. This cycle repeats every season in Fort Worth.
- Ice storm damage to slide gate systems. The February 2021 freeze covered rack and pinion assemblies in a glaze of ice that seized the mechanism when owners pressed the opener. Gears stripped, shafts snapped, and wood boards that soaked up moisture split when temperatures dropped.
- Shared driveway squeeze-outs in older neighborhoods. In Fairmount and other early-1900s districts, driveway right-of-ways run tight against the neighbor’s property. A swing gate simply won’t work there. We retrofit slide gates that stay within the owner’s own footprint while preserving vehicle access for everyone.
- Brick column failure on mid-century homes. The 1950s-70s ranch homes across south and east Fort Worth often have ornamental iron gates mortared into brick pillars. Clay-soil movement cracks the mortar joints over decades, and the entire column shifts. Until that column is repaired, no hinge adjustment will hold.
We rebuilt a sagging swing gate in Ryan Place where the hinge post had shifted inside a cracked brick column. Our crew reset the post with a deeper concrete footing, repaired the column mortar, then rehung the gate with a LiftMaster operator and new safety photocells so it latched cleanly through the next wet season. That’s the difference between a gate repair that lasts and one that fails by October.
Pricing for Gate Repair in Fort Worth, TX
A hinge and post repair in Fort Worth typically runs $180 to $420, depending on whether we’re resetting one post or rebuilding a cracked brick column. Gate realignment on a standard single swing gate runs $150 to $300. Electric gate repair ranges more widely: a new safety sensor or limit switch is usually $140 to $250, a replacement control board runs $250 to $500 with labor, and a full operator replacement with installation can run $600 to $1,800 depending on the brand and gate weight. Automatic gate repair after ice storm damage runs $200 to $800, depending on whether we’re replacing a rack, a gear, or a motor assembly.
Every price is quoted and agreed before any work starts. You’ll know the number before we turn a bolt. We don’t bill surprises. Call (469) 564-8046 for a free estimate, or ask about our current standing offers: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans.
We Also Serve Cities Near Fort Worth
While this page focuses on Gate Repair in Fort Worth, our crews regularly take calls from homeowners in Kennedale, Arlington, Crowley, and Mansfield. If you’re just outside the city line, call (469) 564-8046 and we’ll let you know when our nearest technician can reach you. For full details on our services, visit our Gate Repair page.
Key Takeaways for Fort Worth Homeowners
- Blackland Prairie clay moves Fort Worth gate posts in ways sandy-soil suburbs never see. The soil problem must be fixed, not just the symptom.
- Ice storms and 110°F heat both take down automatic gate operators, so we check the whole system after a failure, not just the broken part.
- We service nine automation brands including DoorKing, Elite, Ghost Controls, and Mighty Mule, and stock common parts locally.
- Every repair is quoted and agreed before work starts, and every job carries the written 90-Day Done Right Promise.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fort Worth
Your gate post is heaving because Fort Worth sits on Blackland Prairie shrink-swell clay, and your post footing wasn’t set deep enough or wide enough to resist the soil’s expansion and contraction. When heavy rain saturates the clay, it swells and pushes the post upward. When it dries, the clay shrinks and the post drops, leaving the gate out of plumb. We fix it by excavating and resetting the post on a deeper, wider footing that reaches below the active shrink-swell zone. Call (469) 564-8046 and we’ll assess the footing and give you an exact price to set it permanently.
Yes. We repair automatic gate operators after ice storms regularly in Fort Worth, because February 2021 and similar events froze rack and pinion assemblies, split wooden gate boards, and shorted control boards across the metro. We inspect the operator, drive mechanism, and mounting hardware for freeze damage, then replace only what’s broken and test the full gate cycle before we leave. Estimates are free. Call (469) 564-8046.
The short answer is clay soil movement under your hinge post. Fort Worth’s Blackland Prairie clay contracts in summer, allowing the post to drop and the gate to drag. In winter, wetter conditions swell the clay, temporarily lifting the post back toward level. The gate isn’t fixing itself; the soil is just shifting the post. We resolve this with a proper post reset on a deeper footing, so the gate tracks true in every season. Call (469) 564-8046 for a free estimate.
Yes, we install slide gates where swing gates will not fit, and this comes up often in Fort Worth’s older neighborhoods with shared driveways and tight right-of-ways. A slide gate travels along the fence line instead of swinging out, which preserves every inch of driveway and keeps your gate from blocking a neighbor’s access. We’ll measure the run, check for slope and soil movement, and quote the full installation in writing before any work starts. Call (469) 564-8046.
Before you call, check whether the gate’s manual release is engaged, whether the safety photocells are blocked or dirty, and whether the circuit breaker for the gate operator has tripped. However, do not attempt to adjust or disassemble high-tension springs, cables, or the operator’s internal gears yourself. Those components can cause serious injury if mishandled. A Fort Worth technician can inspect the system safely and tell you exactly what’s wrong and what it costs. Estimates are free. Call (469) 564-8046.
Call Ironworks Gate Co. for Gate Repair in Fort Worth
You deserve a gate that works without thinking about it. That’s what we do. Victor Salinas and our Fort Worth crews handle hinges, posts, operators, and access systems on nine brands, with upfront pricing, a written 90-Day Done Right Promise, and a live person answering the phone around the clock. If your gate is dragging, stuck open, or dead after a storm, call us now.
We’ll be there when we say. We’ll quote the job before we start. And we’ll stand behind it in writing.
Call (469) 564-8046 for a free estimate on gate repair in Fort Worth, TX.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Fort Worth and the surrounding Dallas-Fort Worth metro since 1984.