Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Fort Worth
Gate parts and welding in Fort Worth usually comes down to one of three jobs: a hinge that has finally given out, a post that has shifted in the clay, or a weld that needs to be cut out and redone properly. A typical hinge replacement runs $180-$340, a post replacement with new concrete footing runs $450-$900, and custom ornamental welding work generally runs $150-$400 per section depending on the ironwork involved. We quote the full price before any work starts, and we stand behind the repair in writing.
Ironworks Gate Co. has served Fort Worth homeowners for over 42 years. Our crews know the west-side bungalows, the mid-century ranches on the south side, and the HOA-governed communities along the Alliance corridor. If your gate is sagging, dragging, or no longer latching, call (469) 564-8046. A live person answers, 24 hours a day, every day.
Why Ironworks Gate Co. Is Fort Worth’s Preferred Gate Parts & Welding Company
Fort Worth homeowners call us because we do the work the way it should have been done the first time. We have spent four decades repairing gates across Gate Parts & Welding in Fort Worth, from Fairmount craftsman homes to gated estates in the north. Our technicians are background-checked and uniformed, and they treat your driveway the way they would treat their own mother’s. No mess left behind, no half-finished repair, no mystery charges added after the fact.
Every job is protected by the 90-Day Done Right Promise, our written guarantee. If something is not right, we come back and make it right. No paperwork, no arguing, no exceptions. That is the deal, and it applies to every hinge we replace and every weld we lay. We also carry the Gate Parts & Welding expertise to handle the automation side, so a sagging gate that trips a sensor gets fixed in one visit, not two.
Scheduling in Fort Worth is coordinated from our Dallas-Fort Worth office. A live person answers the phone around the clock, and we will be there when we say. Free estimates, upfront pricing, and a square deal on every job.
Our Gate Parts & Welding Services in Fort Worth
Hinge Replacement
A worn hinge lets the gate drop, scrape the driveway, and eventually refuse to latch. In Fort Worth’s older neighborhoods like Ryan Place and Mistletoe Heights, the original ornamental iron hinges from the 1940s and 50s often outlive the posts they are mounted in. We cut out the old hinge, weld the new one square, and shim only when the post is still sound. Most hinge replacements are done in a single visit.
Post Replacement
Fort Worth sits on Blackland Prairie shrink-swell clay, and that clay is the reason so many gate posts lean. Wet seasons heave them up. Dry seasons let them sink. A post that leans even an inch throws the whole gate out of plumb. We dig below the heave line, pour a new concrete footing, and set a new post that will stay square through wet years and dry years alike. Typical post replacement in Fort Worth runs $450-$900 depending on depth and the gate’s weight.
Rail Repair
Rails take the load every time the gate swings or slides. In north Fort Worth’s master-planned communities, black powder-coated slide gates bake in 110°F summer heat, and the metal thermally expands. That repeated expansion and contraction fatigues rail welds and causes rack-and-pinion misalignment. We cut out the old rail, weld in new steel, and re-align the track so the gate runs clean again.
Custom Welding
Sometimes the right repair means fabricating a part that no longer exists. A broken ornamental scroll, a latch plate that was cast in 1962, a missing finial on a Fort Worth estate gate. We weld custom replacement pieces that match the existing pattern and finish, often in our shop, then install on site. For HOAs that require architectural committee approval, we provide finish and height specs before any welding begins. Custom welding typically runs $150-$400 per section
Often, the deeper issue is HOA architectural review. In Fort Worth’s HOA-governed neighborhoods like the Alliance corridor, ornamental iron driveway gates often require architectural committee approval before any welding or replacement work, meaning our crew routinely submits finish and height specs to property managers before touching a hinge post. Gate failures that sit for weeks waiting on approval let the clay keep moving under the post footing, and a simple hinge replacement turns into a full post rebuild. We have navigated enough of those reviews to know what the committees look for, and we prepare the paperwork so the project does not stall.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
Many Fort Worth gates are automatic, and a Fort Worth Gate Motor & Opener repair often has to work hand-in-hand with the welded steel. Our team is trained and equipped on nine automation brands, including Ghost Controls, DoorKing, and Mighty Mule. When a slide gate racks out of alignment, it strips the gear teeth and eventually burns out the motor. We fix both sides of the problem, the steel and the operator, in one visit, so the gate closes like the day it was hung.
Common Gate Parts & Welding Problems We See in Fort Worth Homes
- Clay heave throwing posts out of plumb. Fort Worth’s shrink-swell clay is the root cause of most leaning posts and sagging gates. A post set in a shallow footing will move every wet-dry cycle until the weld cracks or the gate drags.
- 110°F heat warping slide gates. Black powder-coated iron gates in full Fort Worth sun can reach temperatures that thermally expand the steel. That expansion causes rack-and-pinion misalignment and stripped gear teeth on automatic systems.
- Ice storm damage from frozen operators and shattered boards. The February 2021 freeze locked up automatic operators across the metro. Similar events occur on a multi-year cycle, and they often crack welds and split wooden gate boards.
- HOA-driven delays that let small problems get worse. In Fort Worth’s gated and covenant-controlled communities, a gate that needs architectural approval before repair can sit for weeks. During that wait, the clay keeps moving under the post, and a $200 hinge job becomes a $700 post rebuild.
We recently repaired a sagging estate swing gate in Ryan Place
where the original 1940s iron gate was mortared into cracked brick columns. Our tech cut out the old hinge post, poured a new concrete footing below the clay heave line, and custom-welded a powder-coated post that matched the existing architectural finish, then coordinated the final inspection with the neighborhood’s management company. That is the full scope of the work, done once, done right.
Pricing for Gate Parts & Welding in Fort Worth, TX
Gate parts and welding prices in Fort Worth run in line with the metro, but the clay soil and HOA coordination sometimes add a step before the repair itself. Hinge replacement on a standard residential swing gate runs $180-$340. A full post replacement with excavation below the heave line and a new concrete footing runs $450-$900. Custom ornamental welding typically runs $150-$400 per section. Rail repair and re-alignment runs $250-$600. The exact price is quoted and agreed before any work starts. No surprises on the bill, ever. We also offer a $50 discount on any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Fort Worth
Our crews regularly cover Kennedale, Arlington, Crowley, and Mansfield in addition to Fort Worth proper. If your property is in a small town just outside the city limits, the same truck, the same technicians, and the same written guarantee apply. Call (469) 564-8046 and we will get you on the schedule.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Fort Worth
In many Fort Worth communities, yes. Ornamental iron driveway gates in HOA-governed neighborhoods like the Alliance corridor often require architectural committee approval before any welding or replacement work. Our crews routinely submit finish and height specs to property managers before touching a hinge post. If you are not sure whether your HOA requires approval, call us and we will help you figure out what your covenants say and prepare the submittal if one is needed. Call (469) 564-8046 for a free estimate.
Fort Worth sits on Blackland Prairie shrink-swell clay, which heaves upward when wet and sinks when dry. A gate post set in a shallow footing moves with every wet-dry cycle, eventually leaning far enough to drag the gate or crack the weld. The fix is to excavate below the heave line and pour a deeper footing, which is exactly what our post replacement service does. Call (469) 564-8046 for an exact quote.
Yes. We custom-weld replacement scrolls, finials, latch plates, and entire gate sections to match the existing pattern and finish. For HOA-controlled properties, we submit finish and height specs before the work begins so the repair passes architectural review on the first pass. Call (469) 564-8046 to talk through your gate’s ironwork.
Yes. Ice storms like the February 2021 event freeze automatic operators and crack welds in the process. We handle both sides of that repair: cut out the damaged steel, weld the frame back square, and replace or repair the operator. We service Ghost Controls, DoorKing, Mighty Mule, and six other major brands. Call (469) 564-8046 and a live person will answer, day or night.
We coordinate the work with the property management company and schedule the repair in a window that keeps at least one lane of the shared entry open. For Gate Access Control in Fort Worth issues like loop detector faults on Blackland Prairie clay, we check the detector wiring and the gate’s alignment before we weld anything, so the system goes back to working correctly for every keypad and phone app. Call (469) 564-8046 for a free estimate – we will work with your HOA or management company directly.
Get Your Fort Worth Gate Repaired Right, Backed in Writing
If your gate sags, drags, or will not latch, call Ironworks Gate Co. at (469) 564-8046. We serve all of Fort Worth – the craftsman bungalows of Fairmount, the mid-century ranches across the south side, the HOA communities along the Alliance corridor, and the estate properties around Ryan Place and Mistletoe Heights. A live person answers 24/7. The estimate is free, the price is quoted before we start, and every repair is protected by the 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Fort Worth and the surrounding metro since 1984.