Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Motor & Opener Cost in Burleson?
Replacing or installing a new gate motor in Burleson typically costs between $950 and $2,800, depending on the gate weight, current power infrastructure, and the specific brand of operator required. Most standard residential driveway gate motor installations in Burleson, including labor and testing, fall in the $1,200 to $1,800 range. We provide upfront pricing before we turn a single bolt, ensuring you know exactly what the project costs before work begins.
Gate Motor & Opener Cost Breakdown (2026)
When you look at the cost of a gate motor, you are paying for the hardware, the labor to integrate it with your existing hinges and power, and the calibration of safety sensors. Because Ironworks Gate Co. services nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, we can often match a motor to your specific gate weight and duty cycle requirements without needing a complete gate replacement.
| Service Item | Estimated Cost Range (Burleson) |
|---|---|
| Standard Residential Motor Replacement (Unit Only) | $650 – $1,200 |
| Full Installation (Labor + Hardware + Calibration) | $1,200 – $2,800 |
| Access Control Integration (Keypads, Remotes, Intercom) | $300 – $850 |
| Safety Sensor & Loop Detector Upgrade | $250 – $500 |
| Emergency Motor Repair/Troubleshooting Visit | $150 – $350 |
Factors like the age of your current electrical run in your Burleson driveway can influence the final price. If your existing wiring does not meet current code or lacks sufficient amperage for a high-traffic opener, that adds to the labor time. However, we believe in a square deal: we provide an upfront price, so you never face surprises on the bill. If you need clarity on your specific setup, call (469) 564-8046 for an exact quote.
What Affects Gate Motor & Opener Pricing in Burleson
In our 42 years of service, we have seen that Burleson homeowners often deal with specific environmental factors that influence how long a motor lasts and what it costs to maintain. Here is what typically moves the needle on price:
- Gate Weight and Material: A wrought iron gate that has sagged over two decades requires significantly more torque to move than a lightweight aluminum frame. If the gate drags, the motor works harder, requiring a higher-capacity unit to prevent premature failure.
- Power Availability: Installing a motor where there is no existing electrical conduit requires trenching or running new lines, which adds to the labor hours. We always assess your power setup during our initial visit.
- Safety Compliance: Every new installation must comply with current safety standards. If your gate lacks proper entrapment prevention devices like photo eyes or contact sensors, these must be added, which increases the total cost but ensures your family is protected.
- Brand Compatibility: We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate is already set up for a specific brand, staying within that ecosystem can sometimes save on labor costs because the mounting patterns and wiring logic are already in place.
- Local Geography and Weather: Burleson soil shifts, and our humid summers followed by dry winters can cause posts to move. If your gate posts have shifted, a new motor won’t fix the underlying problem; we often have to address the hinge alignment first to ensure the motor operates smoothly without burning out its gears.
How to Save on Gate Motor & Opener
The best way to save money on your gate system is through regular maintenance rather than waiting for a complete motor failure. A motor that struggles against a binding gate will burn out years before its time. We offer an $89 Seasonal Tune-Up that identifies these issues early, preventing costly motor replacements. Additionally, we offer a 5% Senior and Veteran discount on all our services. If you have already received a quote from another provider, we offer a Free Second Opinion on Any Written Estimate to ensure you are getting a fair price for the work required. For repairs over $250, we offer a $50 discount to help keep your property secure. Call (469) 564-8046 to schedule your estimate.
FAQs - Gate Motor & Opener Cost
How much does it cost to fix a gate that won’t open in Burleson?
Repairing a gate that won’t open typically costs between $150 and $450, depending on whether the issue is a simple sensor misalignment, a blown fuse, or a failed motor capacitor. We diagnose the specific failure on-site and provide an upfront price before we start any work. Call (469) 564-8046 for an exact quote.
Is it cheaper to repair or replace my gate motor?
If your motor is less than 10 years old and the failure is due to a minor electrical issue or a sensor problem, repair is almost always the more cost-effective choice. However, if the motor is older than 15 years, lacks modern safety features, or has a stripped internal gear assembly, replacing the unit is usually the better investment to avoid recurring service calls. We will give you an honest recommendation based on your specific system.
Can you install a gate motor on an existing gate?
Yes, we can install a new opener on most existing gate configurations, provided the gate itself is structurally sound and swings freely. If the gate is dragging or the hinges are seized, we must address those mechanical issues first so the new motor does not fail prematurely. We are experts in welding and hinge repair, so we can handle the entire project from start to finish.
How long does a new gate motor installation take?
Most standard residential gate motor installations are completed in a single visit, typically taking 3 to 6 hours depending on the complexity of the wiring and the mounting requirements. Because we carry parts and equipment for nine major brands, we rarely need to return for a second trip. We respect your time and aim to get your gate operational the same day we arrive.
Do you offer any guarantees on your motor work?
Every job we complete is protected by our 90-Day Done Right Promise. This is a written, no-hassle guarantee, meaning if something is not right, we come back and fix it without arguing or paperwork. We stand behind our work, and we want you to be confident that the job was done correctly the first time.
Pricing reflects the Burleson market as of 2026. Ironworks Gate Co. offers free estimates - call (469) 564-8046.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burleson since 1984.
What Our Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer