Linear Keypad & Intercom Repair Nationwide

Linear Keypad & Intercom Repair: The Burleson Owner’s Guide

We repair and replace Linear keypads and intercom systems throughout Burleson, with most keypad swaps completed in a single visit and typical installed pricing running $145 to $380 depending on the model and wiring condition. The call usually starts the same way: a homeowner tells us the keypad lights up but won’t open the gate, or the intercom crackles, or the keypad went completely dark after the last storm. What they are describing is almost always a failed Linear keypad, a corroded wiring connection, or a worn intercom board, and all three are problems we see and fix regularly here in Johnson County.

Call (469) 564-8046

Victor Salinas has worked on Linear equipment around Burleson long enough to know which parts fail first and which ones are worth rebuilding. Linear makes solid hardware, but heat, dust, and the occasional Texas thunderstorm take a toll on anything mounted outside year-round.

Key takeaways:

• Most Linear keypad replacements happen same-visit once we confirm the exact model.
• Upfront pricing agreed before we touch a single wire.
• Every job backed by our written 90-Day Done Right Promise.
• We are an independent service company, not affiliated with Linear, but we work on their equipment every week.

Which Linear Models This Applies To

We service the full range of Linear residential gate access equipment found around Burleson: the AE-100, AE-500, and AE-1000 telephone entry systems, the AK-11 and AK-21 keypads, and the older AM-KP wireless keypads you still see on plenty of gates built before 2010. If you have a Linear receiver paired with a keypad, we can usually match it by the model sticker inside the keypad housing or on the back of the intercom faceplate. Take a photo of that label before you call. It saves time and saves you money.

One compatibility gotcha we run into constantly in Burleson: a Linear keypad is not universally interchangeable across product generations. The AE-100 and older AM-KP keypads use different wiring schemes and radio frequencies than current models, and homeowners sometimes order a replacement online, wire it in, and wonder why the gate ignores it. That is a common frustration we sort out quickly. When a direct Linear part is no longer available, we will tell you plainly and offer a quality aftermarket equivalent that matches the original voltage and output contact rating. We stock common Linear keypads on the truck, along with the relays, wire, and connectors needed to make the connection right the first time.

Signs Your Linear Keypad or Intercom Is Failing

• Keypad is dead with no backlight or beep. This usually means the keypad has lost power from the gate operator or a fuse inside the cabinet has blown. We check the feed first, because replacing a keypad without finding the real fault means replacing it again in six months.
• Some buttons work and others don’t. The membrane on Linear keypads wears unevenly, especially the most-frequently pressed digits in a homeowner’s code. If you have to press 3 or 7 five times to get it to register, that keypad is on borrowed time.
• Keypad works but the gate won’t move. This points less at the keypad and more at the receiver, relay, or operator control board. We test the signal path and isolate the failed component before recommending a part.
• Intercom audio is scratchy, faint, or completely silent. Corrosion on the speaker connections or a failing board capacitor is usually the culprit. Texas humidity and the dust from our dry stretches work together on exposed electronics.
• The gate opens on its own or only sometimes. A sticking relay inside the intercom or keypad circuit can send ghost signals. It is not haunted; it is a component acting up, and it is fixable.

Replacement Cost & What’s Included

For a Linear keypad replacement in Burleson, you can expect a typical installed price between $145 and $260 for a basic keypad, with intercom and telephone entry units running $280 to $380 installed. The range depends mostly on the specific Linear model, whether existing wiring can be reused, and whether the gate operator needs a matching receiver update. We quote the total before work starts, so the number you approve is the number on the invoice.

Every Linear keypad or intercom job includes removal of the old unit, wiring inspection and correction where needed, programming the new codes with you, and demonstration of the full operation before we leave. The work is covered by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. Standard offers apply: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans.

DIY or Call Us?

A homeowner can safely check a few things before calling: confirm the keypad has power by looking for a lit digit or audible beep, check the gate operator’s breaker and reset button, and note whether the problem is constant or intermittent. Those observations help us diagnose faster.

What we would not recommend is opening the keypad housing or pulling the operator cover and probing with a meter, unless you have real electrical experience. The gate operator contains live line voltage even when the gate is not moving. The safest and most reliable path for Linear keypad and intercom repair in Burleson is a technician who already knows the brand and has the right part on the truck. We are that shop. Call (469) 564-8046 and we will get it sorted.

FAQs