A Ironworks company - serving Burleson, TX

LiftMaster Gate Motor & Opener Nationwide

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators
Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

LiftMaster Gate Motor & Opener in Burleson: What to Know First

LiftMaster gate motor repair in Burleson typically runs $220-$480 for most board, limit switch, or capacitor failures, and a full opener replacement usually lands between $950 and $2,400 depending on the model and gate weight. We are an independent LiftMaster service provider, not a manufacturer-authorized shop, which means we fix what is broken rather than steering you toward a new unit when a $40 part will do the job. Most LiftMaster gate motor repairs in Burleson are completed the same day we arrive, and every price is quoted and agreed before any work starts. If your LiftMaster gate is acting up, call (469) 564-8046 and a live person will answer, day or night.

Call (469) 564-8046

How LiftMaster Products Fail - and How We Fix Them

We see the same LiftMaster failure patterns across Burleson driveways often enough that we can usually name the fault from the symptom before we open the housing. Here are the five we run into most:

  • LA400 / LA412 swing arms losing travel limits. The LA400 series is the most common LiftMaster swing opener in Burleson, and its limit switches are known to drift after a few years of Texas heat and occasional gate bumps. The arm will start stopping a foot short of closed, or slam past the post. We reset and recalibrate the limits, then verify the arm is not fighting a sagging hinge, which is usually the real reason the limits drifted in the first place.
  • CSL24V slide operators with blown control boards after storms. Burleson gets real lightning, and the CSL24V board is sensitive to power surges. A strike a block away can scramble the board so the gate opens but refuses to close, or starts cycling on its own at 2 a.m. We replace the board with OEM LiftMaster parts and add surge protection where the homeowner wants it, because the second board is the one that should not have been needed.
  • Capacitor failure on older SL3000 slide motors. An SL3000 that hums but will not move the gate almost always has a dead start capacitor. It is a $25 part and twenty minutes of work, but plenty of homeowners get quoted a full motor replacement. We test the capacitor first, replace it if it is weak, and only recommend a new operator if the motor windings themselves have failed.
  • Photo eyes knocked out of alignment on estate gates. LiftMaster photo eyes are mounted low on the gate posts, and Burleson yards have a way of nudging them with mowers, trimmers, and the occasional grandchild. The gate will start closing, reverse, and flash the entrapment warning. We realign the eyes, tighten the mounts, and sometimes shield them if the post sits in a sprinkler zone, because water in the lens connector causes the same symptom.
  • Battery backup units on LiftMaster operators going dead without warning. The LiftMaster battery backup that keeps a gate working during outages has a service life of roughly three to five years in Burleson heat. Most homeowners do not know it has failed until a storm knocks out power and the gate will not budge. We test the battery on every tune-up and replacement job, and if you have a liftmaster operator with a dead battery, we swap it before the next storm season, not after.

Our LiftMaster Gate Motor & Opener Process

Every LiftMaster job in Burleson follows the same unhurried sequence. No surprises, no upselling, no bill you did not agree to.

  1. 1
    You call, we listen. A live person answers, 24/7. Tell us what the gate is doing and what brand is on the arm. Victor Salinas has been known to say, “Tell me what it is doing, and I will tell you what it needs - no guesswork, no runaround.”
  2. 2
    The tech arrives and diagnoses before touching anything. We test the operator, check the limits, inspect the gate itself, and look at the power feed. LiftMaster problems are sometimes gate problems wearing an opener disguise, and we do not fix the wrong thing.
  3. 3
    You get a straight quote. We show you the part and labor cost, explain whether OEM LiftMaster parts or a quality aftermarket equivalent makes sense for your gate, and you approve it before a single bolt turns.
  4. 4
    The repair happens on the spot. Most LiftMaster gate motor and opener repairs on Burleson drives are done in one visit. We carry boards, capacitors, limit switches, remotes, and receivers for the most common LiftMaster lines on the truck.
  5. 5
    We test it the way you will use it. Open, close, reverse, obstruction, remote range, keypad, battery backup if you have one. If it does not behave like it should, we are not done.
  6. 6
    We stand behind it in writing. Every LiftMaster repair carries the 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork, no arguing.

What LiftMaster Gate Motor & Opener Costs in Burleson

Here are the honest numbers for the LiftMaster jobs we do most in Burleson:

  • Diagnostic visit: $49-$89, waived if you approve the repair on the same visit
  • Limit switch or capacitor replacement: $220-$380
  • Control board replacement (LA400, LA412, CSL24V): $350-$650 depending on the board
  • Photo eye realignment or replacement: $120-$280 per pair
  • Battery backup replacement: $180-$350
  • Full LiftMaster opener replacement (swing or slide, installed): $950-$2,400 depending on gate weight, length, and model

The price moves with gate size, access to the operator, and whether we are dealing with OEM or aftermarket parts. You will know the number before we start. Call (469) 564-8046 for a free estimate on LiftMaster gate motor and opener work in Burleson.

Why Burleson Homeowners Call Ironworks Gate Co. for LiftMaster Work

We have been working on Burleson gates since 1984, and we have seen LiftMaster operators outlast their weather seals and outlast their owners’ patience. Our techs are trained and equipped on nine gate-automation brands, so when a LiftMaster job turns out to involve a gate originally hung for a different brand, or a homeowner switches systems, we handle the change without a second visit. We also service Mighty Mule, Ghost Controls, and DoorKing for neighbors who have a second gate or a previous opener still in service. Every tech who pulls up to your driveway is background-checked, uniformed, and working under the same standard we have kept for over 42 years: done right, and backed in writing. A live person answers the phone at (469) 564-8046, 24 hours a day, and the price is settled before the first bolt turns.

FAQs

Need Gate Repair help in Burleson? Licensed & insured · same-day response · free estimates
Call (469) 564-8046
Local Service Coverage

Request a Free Estimate in Burleson

Tell us what you need - Ironworks Gate Co. responds fast. No obligation.

By reaching out through this form, you agree to the terms of our Privacy Policy and agree to be contacted by telephone, text message, or email about your service request, including from the local pros who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch