Ghost Controls Gate Repair Service Nationwide

Why Burleson Homeowners Choose Ghost Controls Gate Repair

Ironworks Gate Co. provides independent Ghost Controls repair in Burleson and service throughout the area - from stripped TSS1 spindle gears to ACP1 control boards gone dead after a hard rain. We are not a Ghost Controls dealer or warranty shop, which means our job is to repair and recalibrate what you already own, not sell you a replacement. Call (469) 564-8046 and you will speak with a live person who knows Ghost Controls openers, not a voicemail tree.

Call (469) 564-8046

Ghost Controls builds dependable solar and AC-powered gate openers, and plenty of Burleson driveways run on them. But the Blackland Prairie clay under this city does not treat any gate opener gently. The ground heaves, posts shift, gears strip, and sensors drift. We have been fixing gates across Burleson for over 42 years, and we have learned exactly which Ghost Controls components fail first in this soil and this climate. That knowledge is what you are paying for when you call us.

Victor Salinas grew up in Burleson, not far from the old Chisholm Trail Crossing area, and he has spent most of his life within a few miles of where he works today. He learned welding and electrical fundamentals at Tarrant County College’s Southeast Campus in Arlington, then spent years pulling wire, diagnosing motors, and learning why a gate that looks fine can still fail on a cold morning. That is the experience behind every Ghost Controls repair we do.

Why Trust Ironworks Gate Co. for Your Ghost Controls Gate Repair?

Ghost Controls openers are built around proprietary mounting bosses and connector pinouts. A technician who has never opened an ACP1 control board or replaced a TSS1 spindle gear will spend the first hour guessing. Our crew has rebuilt enough of them to skip the guessing. We know the magnetic limit switch drift that makes a TDS2 slide gate stop short. We know the moisture intrusion pattern on ACP1 boards after Burleson downpours, when cover gaskets crack and water finds the connector pins. And we know the plastic spindle gear on TSS1 solar units is the first thing to go when a gate gets forced open against the lock.

We service nine gate-automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - so when a Burleson homeowner calls with a Ghost Controls problem, we are not learning the brand on their driveway. We are applying what we already know. Every job is protected by our written 90-Day Done Right Promise: if it is not right, we come back and make it right. No paperwork, no arguing. We also settle the price before a single bolt is turned, so there are no surprises on the bill.

Background-checked, uniformed technicians do the work. They treat your property the way they would treat their own mother’s. And a live person answers our phone 24 hours a day, 7 days a week - not a voicemail, not an answering service, not a callback queue.

Common Ghost Controls Gate Repair Problems We Fix in Burleson

• Stripped TSS1 spindle gear after a forced opening. The TSS1 solar slide gate opener uses a plastic spindle gear that engages the drive chain. When a gust of wind or a delivery driver forces the gate open against the locked motor, that gear takes the full load and strips. The motor runs fine, but the gate does not move. We replace the gear with an OEM unit and recalibrate the magnetic limits so the opener cycles clean again. This is one of the most common Ghost Controls failures we see on Burleson acreage properties and rural driveways.
• Moisture intrusion into the ACP1 control board. The ACP1 board is the brain of many Ghost Controls swing and slide systems. Its cover gasket is the weak point. After a few North Texas rain seasons - or one bad Burleson downpour with a cracked gasket - water gets inside and corrodes the connector pins. Symptoms range from no LED at all to intermittent operation that makes no sense until you open the cover. We clean or replace the board, seat a fresh gasket, and apply dielectric grease to the connectors before sealing it back up.
• Magnetic limit switch drift on TDS2 and TSS1 slide openers. Ghost Controls slide gate openers use magnetic limit switches to tell the motor where to stop. Over time, vibration, temperature swings, and clay-driven post movement cause those limits to drift. The gate stops short of fully open, or overruns the end stop and grinds. We re-set the magnetic limits, verify the stop positions, and test the full cycle multiple times before we call the job done.
• Solar panel corrosion and undervoltage on TSS1 systems. Many Burleson homeowners run Ghost Controls TSS1 openers on solar power because their driveway sits too far from a power source to pull AC. The problem is the North Texas sun bakes the panel mounts and connectors. Corrosion builds on the terminals, voltage drops, and the opener starts working intermittently - or not at all on cloudy days. We test the panel output, clean or replace corroded connections, and verify the battery is actually charging.
• Battery pack failure and generic replacements gone wrong. Ghost Controls solar and backup systems rely on 12V sealed battery packs. Burleson summers are hard on batteries - heat shortens their life, and a battery that sits discharged through a wet winter will sulfate and die. We see a lot of generic 12V batteries wired in by well-meaning homeowners that do not match the connector spec or the charge profile. We install quality aftermarket equivalents with matching voltage and connector pinouts, or OEM packs when the job calls for them, and we verify the charge circuit is working before we leave.

Ghost Controls Parts & Our Repair-vs-Replace Approach

Ghost Controls uses proprietary mounting bosses and connector pinouts on their control boards, limit switches, and drive gears. When those components fail, we install Ghost Controls OEM parts because the mounting points and electrical connections are not interchangeable with generic equivalents. A control board that does not seat correctly will fail again, and a gear with the wrong tooth pitch will destroy the chain it drives.

For wear items - battery packs, solar panels, and some hardware - we use quality aftermarket equivalents with matching voltage, amperage, and connector specs. We do not cut corners on the parts that keep your gate safe and working. We also tell you straight when a motor or board is too far gone to rebuild. Replacing a $200 board on a 12-year-old opener with a corroded chassis is not honest work, and we will not sell it to you. Call (469) 564-8046 and we will give you a straight answer about whether your Ghost Controls opener is worth repairing.

Our Ghost Controls Service Process - Step by Step

1. 1
   Diagnosis. We listen to what the opener is doing - or not doing. We inspect the motor, spindle gear, control board, limit switches, battery voltage, and solar panel output. On Ghost Controls systems, we pay particular attention to the ACP1 board connectors and the magnetic limit positions, because those are where Burleson weather and clay movement show up first.
2. 2
   Repair or replacement quote, upfront. We tell you what is wrong, what it costs to fix, and whether repair makes sense or replacement is the honest call. The price is quoted and agreed before any work starts. If we recommend replacing the opener, we explain why in plain language - and we can supply and install a new Ghost Controls unit or a comparable model from another brand we service.
3. 3
   Repair and recalibration. We install OEM or quality aftermarket parts, re-set magnetic limits, seal control board covers with fresh gaskets, and apply dielectric grease to connectors. On solar systems, we verify panel output and battery charging. Every repair is done to the 90-Day Done Right Promise standard - the Keystone Standard we apply to every job.
4. 4
   Full-cycle testing. We run the opener through multiple full cycles - open, close, stop, reverse - and verify the safety edges and obstruction detection are working. A Ghost Controls opener that cycles once and fails on the second pass is not a completed repair.
5. 5
   Warranty and follow-up. Every job is backed in writing by our 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions.

Ghost Controls Products We Service & Install in Burleson

We service and install the full Ghost Controls residential lineup, including the TSS1 Solar Slide Gate Opener, the AXDP Dual Swing Gate Opener, the AXP1 and TXP1 Single Swing Gate Openers, and the TDS2 Dual Slide Gate Opener. We keep common Ghost Controls parts in local stock - spindle gears, magnetic limit switches, control board gaskets, battery pack connectors - so many repairs can be completed in a single visit without waiting on a parts shipment. When a part is not on the truck, we tell you honestly and get it ordered.

We Also Service These Brands

We also provide Crowley Ghost Controls service, and Ghost Controls is one of nine gate-automation brands we are trained and equipped to service overall. If you also have a LiftMaster on one gate and a Mighty Mule on another, or a DoorKing at a rental property, one call handles all of them. Certified service across nine major brands means the correct fix is made on the first visit, whatever is on the driveway.

FAQs - Ghost Controls Gate Repair Service in Burleson

Why does my Ghost Controls TSS1 open but not move the gate after a windstorm?

The most common cause is a stripped plastic spindle gear. When wind forces the gate against the locked motor, the gear takes the full load and strips out, so the motor runs but the gate stays put. We replace the spindle gear with an OEM unit and recalibrate the magnetic limits. Call (469) 564-8046 for a free estimate - we will tell you over the phone whether this sounds like your problem.

Can I use a generic 12V battery in my Ghost Controls solar opener?

You can, but only if the voltage, amp-hour rating, and connector spec match the original battery pack. Many generic 12V batteries have different terminal styles or charge profiles, and wiring one in wrong can damage the charge circuit on the ACP1 board. We install quality aftermarket equivalents with matching specs, or OEM packs when the job calls for them. Call (469) 564-8046 and we will help you sort out which battery your opener actually needs.

My Ghost Controls ACP1 board shows no LED even after charging. Is the board dead?

Not necessarily. A dead LED on an ACP1 board can mean a failed board, but it can also mean a corroded connector, a blown fuse, or a battery that is too far gone to hold a charge. We test the board, the battery, and the connections before condemning anything. More than a few Burleson homeowners have been told they need a new board when all they needed was a cleaned connector and a fresh gasket. Call (469) 564-8046 and we will diagnose it properly.

How do I know if my Ghost Controls magnetic limit switches are out of adjustment?

If your slide gate stops short of fully open, overruns the end stop and grinds, or reverses at the wrong point, the magnetic limits have likely drifted. Ghost Controls uses magnet-triggered switches that can shift with vibration, temperature swings, and gate post movement. Re-setting them requires access to the control board and a methodical calibration process. We do this as part of every Ghost Controls service call - it is not a guess-and-check job.

Do Ghost Controls openers work with any swing gate, or do I need a specific hinge type?

Ghost Controls swing gate openers work with most standard residential swing gates, but the hinge type matters more than most people realize. Gates hung on sagging or misaligned hinges put extra load on the opener’s drive arm and motor, which shortens their life. In Burleson, where clay movement regularly throws gate posts out of plumb, hinge alignment is often the root cause of a Ghost Controls opener that is working too hard. We check the hinges and post alignment as part of every swing gate opener diagnosis.

How much does Ghost Controls gate repair cost in Burleson?

Most Ghost Controls repairs in Burleson run between $180 and $450, depending on the part and the labor involved. A spindle gear replacement on a TSS1 typically lands on the lower end of that range, while a full ACP1 control board replacement runs higher. Every job is quoted and agreed before any work starts, so you will never see a surprise on the invoice. We also offer $50 off any repair over $250 and a free second opinion on any written estimate. Call (469) 564-8046 for an exact quote - estimates are free.

Book Your Ghost Controls Service in Burleson, TX

If your Ghost Controls opener is grinding, stopping short, or dead at the post, call (469) 564-8046. A live person answers 24 hours a day, 7 days a week, and estimates are free. We serve all of Burleson and the surrounding area, including Ghost Controls service in Alvarado, and we will be there when we say.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burleson since 1984.