Elite Gate Parts & Welding Nationwide

Elite Gate Parts & Welding in Burleson: What to Know First

Ironworks Gate Co. provides independent Elite gate parts and welding throughout Burleson, from hinge replacements and custom rail repairs to post resets and latch work. Most Elite parts and welding jobs are quoted upfront over the phone and completed in a single visit, with common hinge and roller replacements typically running $180 to $420 depending on post condition and accessibility. We quote the price before any work starts, so there are no surprises on the bill. If you own an Elite gate in Burleson and it is sagging, grinding, or refusing to latch, call (469) 564-8046 and we will tell you exactly what is wrong before we touch anything.

Call (469) 564-8046

This page is for Burleson homeowners with an Elite driveway or estate gate who need straight answers about parts, welding, and whether a repair is worth doing. We are an independent Elite service provider, not authorized by or affiliated with Elite, which means we can use the best available part for the job without being tied to a manufacturer’s menu.

How Elite Products Fail - and How We Fix Them

Elite gates are generally well-built, but decades of Burleson heat, clay soil movement, and daily cycling expose the same weak points over and over. Here is what we actually see on Elite gates in Burleson, and what we do about it.

• Elite SL3000 and SL3000 series hinge wear. These slide gate lines use heavy cantilever rollers and guide assemblies. When a roller bearing starts to flatten or the nylon wheel develops a flat spot, the gate begins to surge and bounce mid-travel. The gate is not misaligned at the post, it is dragging on a dead roller. We replace the roller assembly with a matched aftermarket component, re-grease the sealed bearings, and re-space the cantilever guides so the gate rides clean again.
• Post fatigue on Elite estate series swing gates. Burleson sits on expansive clay that swells and contracts with rainfall. Over 15 to 20 years, a hollow steel post set in clay will slowly lean, and the weld at the base of the post will start to crack under the gate’s weight. We dig out the old footing, sleeve and weld a new post plumb, and set it in concrete with drainage gravel beneath so water does not sit against the metal.
• Elite SL series rail and rack wear. The SL series uses a bolted rack along the gate rail. If one rack section loosens or a tooth strips, the gate will jump and clatter when the opener pinion catches it. We weld or replace the damaged rack section, check pinion alignment against the rack, and torque every bolt along the run. That stops the clatter that usually gets blamed on the motor.
• Latch strike plate cracking on Elite pedestrian and double-swing gates. The latch plate takes the full force every time the gate closes, especially in wind. After years of slamming, the plate cracks at the welds and the gate won’t stay latched. We remove the old plate, weld in a thicker plate, and re-hang the latch so the bolt seats fully instead of catching on one edge.
• Elite gate opener mount plates breaking free. On Elite swing gate operators, the mount plate is welded to the gate frame. Over time, vibration and gate weight crack that weld, and the opener starts rocking instead of pushing. The gate then opens slower and slams harder. We reinforce the mount with a gusset and re-weld it square to the frame so the opener has a solid base to push against.

Our Elite Gate Parts & Welding Process

Every Elite gate job in Burleson follows the same path. No shortcuts, no surprises.

1. 1
   You call, we listen. Tell us what the gate is doing, or not doing. Victor Salinas will often ask a few pointed questions before we even schedule, because half of Elite gate problems announce themselves in the description.
2. 2
   We show up when we say. Uniformed, background-checked technician at your Burleson driveway, on time. We inspect the gate, hinges, posts, rollers, rack, latch, and operator mounts before we quote anything.
3. 3
   We quote the fix before we touch it. You hear the exact price, and we agree on it before a single bolt is turned. If we find something else while we work, we stop and tell you before continuing.
4. 4
   Parts decision, made honestly. Where Elite OEM parts make sense and are available, we use them. Where a quality aftermarket part outlasts the original at a fairer price, we tell you that and let you choose. We never pad a job with parts you don’t need.
5. 5
   Welding and repair, done right. We handle hinge replacement, post replacement, rail repair, custom welding, gate rollers, latches, and locks with the same care on gate number 400 as on gate number 1.
6. 6
   Test, then guarantee. We cycle the gate by hand and under power, check weld penetration and alignment, clean up the work area, and leave you with the 90-Day Done Right Promise in writing. If it’s not right, we come back. No paperwork, no argument.

What Elite Gate Parts & Welding Costs in Burleson

Elite gate parts and welding prices in Burleson reflect the weight of the gate, the condition of the posts, and whether we are working on a slide or swing setup. Here are honest ranges for what we typically see:

• Elite hinge replacement: $180 to $420, depending on hinge size, post condition, and whether the gate needs re-hanging while it’s off.
• Post replacement with concrete footing: $600 to $1,400, driven mostly by footing size and whether we must cut and re-weld gate frame sections.
• Rail repair and rack section replacement: $250 to $650, including realignment and torque on the remaining sections.
• Custom welding on gate frames, gussets, or mount plates: $95 to $350, quoted per repair, never by the hour with a mystery total.
• Latch and lock repair or replacement: $120 to $340, including strike plate work and re-alignment.

What moves the price most is post rot inside the ground. We will not weld onto a post that is too far gone, because the repair will not hold. We will tell you that honestly and quote the right fix. Estimates in Burleson are free, and the price we quote is the price you pay. Call (469) 564-8046 for an exact number on your Elite gate.

Why Burleson Homeowners Call Ironworks Gate Co. for Elite Work

We have been serving Burleson and the surrounding Johnson County area for over 42 years, and we plan to be here another forty. Victor Salinas grew up near the old Chisholm Trail Crossing area, and the company he runs today is built on a simple rule: tell the homeowner the truth, do the work right, and stand behind it. Every Elite gate job is covered by the 90-Day Done Right Promise, in writing, no fine print and no argument. A live person answers our phone 24 hours a day, 7 days a week, not a voicemail and not an answering service. Our technicians are trained on nine gate-automation brands, including LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so when an Elite gate has an issue at the edge of its own line, we know what we are looking at. We are not the cheapest gate company in Burleson, and we do not want to be. We are the last one you should have to call.

Frequently Asked Questions

Get Your Elite Gate Fixed Right in Burleson

If your Elite gate is sagging, grinding, clattering, or refusing to latch, call Ironworks Gate Co. at (469) 564-8046. Tell us what it is doing, and Victor Salinas will tell you what it needs: no guesswork, no runaround. Estimates are free, prices are agreed before work starts, and every job is covered by the 90-Day Done Right Promise. Done right, and backed in writing.

Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Burleson and nearby areas.