Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Benbrook
A new driveway gate on a Benbrook acreage lot usually runs $2,800 to $9,500 installed, depending on whether we’re building a single ornamental iron gate or a wide double-leaf ranch gate with solar automation. Most standard single residential gates in Benbrook’s established subdivisions land between $2,800 and $4,800. We’re Benbrook‘s gate company, and we’ll quote the job before any work starts. Call (469) 564-8046 for a free estimate, and Victor Salinas or one of our technicians will walk you through what your specific driveway needs.
Benbrook is a different kind of place than the tighter suburbs east of the loop. We work on gates off Winscott Road with pasture behind them, gates on lake-access streets sized for boat trailers, and gates in 1970s-era subdivisions where the original iron has been standing for fifty years. The work changes from street to street. A crew that knows the difference between clay-soil post settings and rocky slope conditions will save you money the day they show up.
Why Ironworks Gate Co. Is Benbrook’s Preferred Gate Installation Company
We’ve spent over 42 years earning a reputation in North Texas for gate work that holds up. Benbrook homeowners keep our number because when we set a post, it stays set. When we hang a gate, it swings true. And every job leaves with the 90-Day Done Right Promise in writing. If something isn’t right, we come back and make it right. No arguing, no paperwork chase.
Our Gate Installation crews know Benbrook’s soil. The clay here expands when wet and contracts when dry, which is why so many gates in town drag or bind after a few seasons. Most companies pour a shallow footing and move on. We don’t. We drill deeper, we cage the rebar, and we build for a gate that’s still closing cleanly ten years from now.
When you call, a person answers. 24 hours a day. Not an answering service, not a voicemail tree. And when we schedule, our uniformed, background-checked technicians show up when we say. That’s a simple promise, but ask anyone in Benbrook who’s waited through a no-show window, and they’ll tell you it matters.
Our Gate Installation Services in Benbrook
Driveway Gate Installation
Driveway gates in Benbrook run from ornamental iron single gates on Timbercreek or Westpark subdivisions to wide double gates on acreage off FM 2871. We build for the driveway you actually use. If you back a boat trailer through the gate twice a week, we spec larger hinges and fuller frame reinforcement. If your gate faces open pasture and catches the southwest wind off Benbrook Lake, we account for lateral load on the posts.
Pedestrian Gate Installation
A separate walk gate beside a big driveway gate keeps you from opening a 14-foot leaf every time you check the mail. In Benbrook’s established neighborhoods, many homeowners are adding pedestrian gates to older driveway setups. We match the existing ironwork, set the post correctly, and install latching hardware that won’t fight you.
Sliding Gate Installation
Sliding gates make sense on Benbrook properties where a swing gate would block the driveway slope or where the drive runs uphill from the road. We install cantilever and track-style sliders, but we’re careful with cantilever on clay. The expanding soil moves posts over time, and a cantilever gate needs a properly engineered footing to stay level. We pour those footings to handle Benbrook’s ground, not a textbook average.
Swing Gate Installation
Swing gates are the standard for most Benbrook driveways, whether it’s a single ornamental gate in a subdivision or a heavy double pipe gate on a horse property. The most common mistake we see on local swing gates is undersized hinges. On a wide, heavy leaf, bolt-on residential hinges wear out fast. We weld commercial-grade hinges where the gate demands them, especially on boat-trailer-width gates near the lake.
Double Gate Installation
Double gates are the workhorse of Benbrook acreage. Two leaves spreading the load instead of one, but only if the posts are deep and the operator is matched to the total gate weight. We measure both leaves, account for wind load, and make sure the opener isn’t fighting the gate. A 16-foot double pipe gate with a properly sized operator opens smoothly every time, even in January.
Solar Gate Opener Installation
Benbrook has acreage lots where running conduit from the house to the gate means trenching hundreds of feet through pasture and across driveways. Solar is often the right answer. We size the panel and battery to the gate and the operator, not to a chart. Shade from live oaks and short winter days both matter. We use Viking and Ghost Controls systems where they fit the load, and we build the battery box to survive Texas heat.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
We’re trained and equipped on nine gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That breadth means you’re not locked into whatever one brand a small shop happened to pick up. For Benbrook’s heavier ranch gates, we often spec Viking or DoorKing operators for their drive strength. For solar, Ghost Controls has proven reliable on shaded acreage lots. We carry common parts in the truck, so the job doesn’t stall while someone orders a control board from a warehouse.
Common Gate Installation Problems We See in Benbrook Homes
- Clay-heaved posts. Benbrook’s expansive clay shrinks in summer and swells in winter rain. Shallow footings tilt, and the gate starts binding or dragging. We set posts 36 inches deep minimum on heavy gates, with rebar cages, because the soil here doesn’t hold still.
- Undersized hinges on wide gates. Lake-access properties off Shoreline Drive or near the Benbrook Lake corridor often have driveway gates wide enough for boat trailers. Those gates cycle more often and weigh more than standard residential gates. Bolt-on hinges fail early; weld-on commercial hinges hold.
- Solar openers that stall in winter or shade. An undersized solar panel or battery on a heavy ranch gate leaves the gate dead on a cloudy January morning. We size the system to the gate’s actual weight and the site’s actual sun exposure, not a brochure number.
- No safety edges on automatic gates. An automatic gate without proper safety protection is a hazard, especially on properties with kids, dogs, or livestock. We install photocells, safety edges, and loop detectors as standard on automated gates in Benbrook, not as an add-on upsell.
Pricing for Gate Installation in Benbrook, TX
Here are honest numbers for Benbrook. A single ornamental iron driveway gate with a basic post mount runs $3,200 to $5,500. A wide double pipe ranch gate with solar automation lands between $6,500 and $9,500. Pedestrian gates are the most affordable, typically $900 to $2,200 installed. A sliding gate starts around $4,800 and goes up with length and automation.
| Gate Type | Typical Benbrook Price |
|---|---|
| Pedestrian gate | $900-$2,200 |
| Single driveway gate (ornamental iron, manual) | $3,200-$5,500 |
| Double driveway gate (steel or pipe, manual) | $4,500-$7,000 |
| Sliding gate with automation | $4,800-$9,000 |
| Double ranch gate with solar automation | $6,500-$9,500 |
The wild card in Benbrook is always soil and power. A gate on stable ground near the house with existing electrical service stays at the low end. A gate at the end of a 400-foot drive on clay that needs deep footings and a solar system lands higher. We quote the final price before any work starts. Free estimates, always. Call (469) 564-8046 and we’ll walk the site with you.
We Also Serve Cities Near Benbrook
Our Benbrook crews regularly cover the surrounding communities, including Burleson, Alvarado, Crowley, and Joshua. If you’re on the edge of town or just outside city limits, give us a call. We’ll tell you straight whether we can get a crew out and when.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Benbrook
Benbrook sits on expansive clay soil that swells when wet and shrinks when dry, a cycle that runs hard through our North Texas summers and winters. That movement pushes and pulls on post footings until the post slowly tilts, even when the gate itself is still square. The fix is a deeper footing, typically 36 inches or more, with rebar reinforcement and concrete poured to match the soil conditions. Call (469) 564-8046 if your gate has started dragging or gapping at the latch, and we’ll check whether the post is moving before we touch anything else.
Yes, and it’s often the best option. On Benbrook acreage lots where running electrical conduit to the gate means trenching 300 feet or more, a properly sized solar system costs less and works reliably. The key is sizing. We match the panel wattage and battery capacity to the actual gate weight and cycle count, and we account for shade from oaks and our short winter days. A small solar kit from a big-box store won’t move a heavy double ranch gate in January. Call (469) 564-8046 for a free site look and an honest solar recommendation.
Weld-on commercial-grade hinges. Properties along Benbrook Lake with driveway gates wide enough for boat trailers see more cycles and heavier loads than a standard residential gate. Bolt-on hinges wear out fast under that load, and the gate starts sagging and racking. We weld heavy barrel or adjustable weld-on hinges designed for the gate’s weight and width. It costs more than a hardware-store hinge, and it’s the difference between a gate that lasts five years and one that lasts twenty. Call (469) 564-8046 and we’ll come look at your gate setup.
At minimum 36 inches for standard driveway gates, and deeper for heavy double gates or gates with automation. Benbrook’s clay soil expands and contracts enough to move a shallower footing within a couple of seasons. We drill 36 to 42 inches, pour a proper concrete footing, and run rebar cages through the post base. For wide ranch gates, we go deeper and wider. There’s a reason we’re specific about this: we’ve replaced enough shallow-footed Benbrook gates to know exactly what happens when someone cuts that corner. Call (469) 564-8046 if you want a gate set to stay put.
Yes. Every automatic gate we install in Benbrook gets safety photocells across the drive opening and, where the gate meets a fence or wall, safety edges on the leading leaf. On properties with horses, livestock, or young kids, we also recommend loop detectors for exit and a keypad for entry so the gate doesn’t close on a trailer halfway through. These aren’t optional extras. An automatic gate without them is a serious hazard, and any reputable installer builds them into the price. Call (469) 564-8046 and we’ll quote your gate with safety included, not as an upsell.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook and the surrounding North Texas communities with gate installation, repair, and automation services.