Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Crowley, TX
When a driveway gate stops opening in Crowley, the fix usually comes down to one of two things: a gate post that clay soil has pushed out of plumb, or an operator board that a winter ice storm finally took out. We handle both, typically the same day you call. Ironworks Gate Co. works exclusively on driveway and estate gates here in Crowley, and a live person answers the phone at (469) 564-8046 whenever you need us. No voicemail trees, no waiting until Monday.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Crowley Homeowners Choose Ironworks Gate Co.
Most of the calls we take from Crowley start the same way: a gate that worked fine for fifteen years, then didn’t. The homeowner wants someone who will show up, know what they’re looking at, and fix it without a second visit. That’s the work we’re built for. We’re trained and equipped on nine gate-automation brands, including LiftMaster, DoorKing, and Ghost Controls, so when a 2007-era operator in the Arbor Creek subdivision finally quits, we bring the right parts on the first truck. Our technicians are background-checked and uniformed, and every job is protected by a written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
We serve the full range of Crowley housing, from older acreage lots off FM 1187 to newer HOA communities like Creekside and Deer Creek. What those properties have in common is simple: the gates take a beating from North Texas soil, and they need a specialist who has seen it before.
Gate Repair Services We Offer in Crowley
Gate Repair
Sagging gates, broken hinges, post rot, cracked welds, and frames that no longer line up. We repair the gate itself, not just the opener bolted to it, and we do it with welding equipment on the truck, not a trip back to a shop. Learn more about our Gate Repair in Crowley.
Gate Installation
We install new driveway and estate gates from the post holes up, whether that’s replacing a rusted ranch pipe gate on the rural edge of town or hanging a full ornamental iron entry in a new HOA build. Every installation gets the same 90-Day Done Right Promise in writing. Learn more about our Gate Installation in Crowley.
Gate Motor & Opener
Operator failed during a freeze? Motor humming but the gate won’t move? We service and replace gate motors and openers from FAAC, BFT, Linear, Viking, Elite, Mighty Mule, and more, and most jobs are completed in a single visit. Learn more about our Gate Motor & Opener in Crowley.
Gate Access Control
Keypads, intercoms, vehicle detection loops, and entry systems that tie back to a house or a small property office. We troubleshoot the whole system, not just the gate, which matters when a stuck gate isn’t the gate at all but the loop detector under the driveway.
Gate Parts & Welding
Sometimes the right fix is a new hinge barrel or a re-welded joint, not a whole new gate. Our Crowley Gate Parts & Welding work is done by the same technicians who install the gates, and the finished repair often outlasts the original fabrication.
Neighborhoods We Serve in Crowley
Our technicians work across Crowley from the older farmstead properties along FM 1187 to the newer HOA subdivisions along the Chisholm Trail Parkway corridor. We’re typically on site within a few hours of your call.
- Creekside
- Deer Creek
- Arbor Creek
- Summer Creek Ranch
- Acreage properties off FM 1187 and Old Granbury Road
Why Crowley’s Climate & Housing Affect Gate Repair
Crowley sits at a live rural-to-suburban transition edge in south Tarrant County. On a single street you can pass a 40-year-old ranch pipe gate welded to steel posts and a brand-new automatic ornamental iron gate at an HOA entrance. Both have the same underlying problem: the expansive Vertisol clay soil prevalent across this part of the county. That soil swells hard during spring rains and contracts during summer drought, and every swell-and-contract cycle pushes gate posts a little further out of plumb. Post-reset and realignment is the single most common repair we perform in Crowley, far more often than motor replacement. Meanwhile, the winter ice storms that hit this side of the DFW metro more frequently than the Dallas side are a leading cause of operator board failures and frozen limit switches. The 2000s-era gate hardware installed across dozens of Crowley subdivisions is now hitting its first major replacement cycle all at once, which is why we keep common DoorKing and Elite parts stocked on our trucks.
Pricing for Gate Repair in Crowley
Here’s what homeowners in Crowley should expect before calling anyone. These are honest ranges, not bait prices:
| Service | Typical Cost Range |
|---|---|
| Post reset and realignment | $250-$600 per post |
| Hinge replacement | $150-$400 per hinge |
| Operator board replacement | $300-$700 |
| Full operator replacement | $900-$2,200 |
| Weld repair on steel gate frame | $200-$500 per repair |
| New gate installation | $2,500-$8,000+ |
Every price is quoted and agreed before any work starts. No surprises on the bill.
Service Area - Cities Near Crowley
Ironworks Gate Co. serves all of south Tarrant County and the surrounding area. If you’re nearby, we also provide gate repair in Burleson, Joshua, Kennedale, and Fort Worth.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Crowley
Most gate repairs in Crowley fall between $250 and $700, depending on whether the post needs resetting, the hinges need replacing, or the operator board needs replacement. Full operator replacements typically run $900 to $2,200. Call (469) 564-8046 for a free estimate on your specific gate.
In most cases, yes. We carry common gate parts and welding equipment on our trucks for Gate Access Control in Crowley, and our technicians are typically on site within a few hours of your call anywhere in the Crowley area.
Crowley sits on expansive Vertisol clay soil that heaves during spring rains and contracts during summer drought. That cycle pushes gate posts out of plumb over time. It’s the most common repair need in this part of Tarrant County, and the fix is a post reset and realignment, not a new gate.
Yes. We service neighborhood entrance gates and community access systems throughout Crowley’s HOA subdivisions, including loop detectors, keypads, and Mighty Mule service in Crowley for telephone entry systems tied to the gate operator.
We do, and it’s a common job on Crowley’s rural edge. Older pipe gates often need to be replaced with code-compliant automatic systems when properties change hands or undergo development. Call (469) 564-8046 and we’ll walk you through what’s needed.
Contact Ironworks Gate Co. for Gate Repair in Crowley, TX
If your gate isn’t working the way it should, call (469) 564-8046 for a free estimate. A live person answers 24 hours a day, 7 days a week. We’ll give you a straight answer, an upfront price, and a written guarantee that covers the work. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Crowley and the surrounding area.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Crowley Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."
- Ruben Morales