Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Burleson?
Most gate repairs in Burleson, Texas, cost between $185 and $450, depending on whether the issue stems from a mechanical failure, a welding need, or an electrical fault in the opener system. For simple adjustments or minor part replacements, homeowners typically pay on the lower end, while complex repairs involving gate automation electronics or structural welding for heavy iron gates usually fall toward the higher end of that range.
At Ironworks Gate Co., we believe in upfront pricing. We do not provide vague estimates over the phone that balloon once we arrive at your driveway. When you call (469) 564-8046, we discuss the symptoms you are seeing, and when we arrive, we provide a firm, written quote before a single bolt is turned. We have served the Burleson area since 1984, and we understand that a fair price is just as important as a gate that opens and closes reliably every time.
Gate Repair Cost Breakdown (2026)
The cost of repairing a gate in Burleson varies based on the specific component that has failed. Because we specialize in nine major automation brands-including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule-we often have the necessary parts on our truck, which helps keep labor costs predictable for our customers.
- Gate Hinge and Alignment Repair: $185 - $325. This usually involves realigning the gate, welding broken hinges, or replacing ball-bearing hinges that have worn down from years of use.
- Gate Opener Motor Repair: $350 - $750. This covers troubleshooting circuit boards, repairing limit switches, or addressing gear assembly issues in common residential openers.
- Safety Sensor Alignment or Replacement: $175 - $290. If your gate stops or reverses unexpectedly, the photo-eye sensors often need recalibration or replacement.
- Gate Welding and Structural Repair: $250 - $550. This is common for older iron gates in Burleson neighborhoods where rust or ground shifting has compromised the frame integrity.
- Access Control and Keypad Repair: $195 - $380. This includes replacing damaged keypads, fixing wiring faults, or resetting programming for remote entry systems.
It is important to note that these figures represent the standard market rate for professional, licensed service in our area. If you find a quote significantly lower than these ranges, we advise caution. A gate is a heavy, moving piece of machinery. Improperly repaired components, especially high-tension springs or heavy, automated iron panels, create significant safety risks for your family and your vehicles. Our team at Ironworks Gate Co. operates under the Keystone Standard, which means we do not cut corners on safety or materials. Every repair we complete is backed by our 90-Day Done Right Promise, ensuring that if something is not right, we return to fix it without argument or additional paperwork.
What Affects Gate Repair Pricing in Burleson?
When our technicians assess a gate in Burleson, we look at several specific factors that determine the final cost. We do not believe in surprises, so we explain these factors during our onsite evaluation.
- The Age and Brand of the Opener: Older systems, specifically those older than 15 years, often require proprietary parts that are no longer in production, which may necessitate a motor upgrade rather than a simple repair. We are fully trained on nine major brands, which allows us to source the correct parts efficiently.
- Structural Integrity of the Gate: Burleson soil can shift, causing fence posts to lean and gates to drag. If the frame is twisted, we must address the underlying structural issue before we can fix the automation, as a motor cannot overcome the physical drag of a misaligned gate.
- Electrical Supply Issues: Sometimes the problem is not the gate but the power source. If there is a fault in the dedicated circuit running to the gate, we must diagnose the electrical failure, which adds time and labor to the total cost.
- Accessibility of the Hardware: If the gate is located on a steep incline or if the equipment is buried in dense landscaping, it takes more time to safely access the motor and sensors. We always prioritize working in a way that respects your property and landscaping.
- Emergency vs. Scheduled Service: We prioritize emergency calls for gates that are stuck open or blocking a driveway. While we always strive to keep our pricing consistent, urgent, after-hours calls may involve different logistics than a routine tune-up.
If you are unsure what is causing your gate trouble, we encourage you to call (469) 564-8046 for a free estimate. We are happy to talk through what you are seeing and provide an honest assessment of whether a repair is the right path forward.
How to Save on Gate Repair
The most effective way to save on gate repair costs is through consistent, preventative maintenance. A gate that is lubricated, balanced, and inspected annually is significantly less likely to suffer a catastrophic mechanical failure that requires expensive, emergency repairs.
We offer an $89 Seasonal Tune-Up specifically designed to catch small issues before they become major expenses. During this visit, we check the tension, lubricate the moving parts, test the safety sensors, and ensure the hinges are secure. Think of it like an oil change for your car; it keeps the system running longer and prevents premature wear on the motor.
Additionally, we provide a 5% discount for all seniors and veterans. We are also happy to offer a Free Second Opinion on any written estimate you have received from another company. If you feel that a quote you received is too high or if you are being told that you need an entire system replacement when a repair might suffice, let us take a look. We have been in business since 1984 under the leadership of Victor Salinas, and we pride ourselves on giving our neighbors in Burleson a square deal.
FAQs - Gate Repair Cost
How much does it cost to fix a gate that will not open?
Most repairs for a gate that fails to open range between $250 and $450. This usually involves troubleshooting the motor, checking the power supply, or replacing a faulty capacitor or control board. Call (469) 564-8046 so we can diagnose the issue and provide a firm price.
Is it cheaper to repair or replace my gate motor?
If your gate motor is less than 10 years old and the repair cost is under $500, it is usually more cost-effective to repair it. If the unit is older, parts may be obsolete, making replacement a better long-term investment. We provide honest advice based on the specific condition of your unit, not a sales quota.
Do you charge for estimates in Burleson?
We provide free estimates for all gate repair services. We believe you should know the cost of the repair before you commit to the work. Call us today at (469) 564-8046 to schedule a time for us to come out and take a look at your gate.
How long does a typical gate repair take?
Most of our repairs are completed in a single visit, usually within 1 to 3 hours. Because we stock parts for nine major automation brands, we rarely need to return for a second trip unless a specialized part must be ordered.
Are there safety risks with DIY gate repair?
Yes, there are significant risks, particularly with heavy iron gates and high-tension springs. These components can cause severe injury if handled without the proper tools and training. We strongly recommend that you leave repairs involving springs, cables, or electrical panels to trained professionals. Call (469) 564-8046 for safe, expert service.
If you are looking for reliable service, you can learn more about our home page or view our detailed Gate Repair in Burleson service page to see the full scope of what we handle. When you are ready for a technician to visit your property, call us at (469) 564-8046.
Pricing reflects the Burleson market as of 2026. Ironworks Gate Co. offers free estimates - call (469) 564-8046. Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burleson since 1984.
What Our Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."
- Ruben Morales