Mighty Mule Keypad & Intercom Repair Nationwide

Mighty Mule Keypad & Intercom Repair: The Burleson Owner’s Guide

If your Mighty Mule keypad has stopped accepting your code or the intercom sounds like a bucket of static, we can usually replace the failed part in one visit. Most Mighty Mule keypad and intercom repairs in Burleson run between $140 and $320 installed, depending on whether we’re swapping a keypad, a wired intercom module, or both. We stock common Mighty Mule replacement keypads and intercom parts on our trucks, so a failed entry system rarely means waiting days for a part to ship.

Call (469) 564-8046

The way most Burleson owners discover the failure is unremarkable: the gate opens fine from the remote, but the keypad outside the fence has gone silent. Sometimes the buttons feel dead with no backlight. Sometimes the intercom crackles when a delivery driver presses the call button, and you can’t make out a word. That’s how it starts, and it rarely fixes itself.

Which Mighty Mule Models This Applies To

We service keypads and intercom modules across the Mighty Mule line, including the FM series (FM200, FM350, FM500, FM502), the MM series (MM260, MM360, MM371W, MM372W, MM571W, MM572W), and the newer Mighty Mule Smart series with wireless keypad options. The key difference for parts matching is whether your keypad is wired directly to the control board or communicates wirelessly to a receiver module. Mighty Mule’s wired keypads typically run on a simple two-wire or four-wire low-voltage connection, while their wireless keypads pair through a small receiver that mounts inside the opener cabinet.

Here’s a compatibility gotcha we see often in Burleson: Mighty Mule changed keypad housing sizes and mounting screw patterns across the FM-to-MM transition years. A keypad from an FM200-era gate will not drop into the same holes as an MM371-era keypad. If the old plastic has sun-faded yellow and embrittled in the Texas sun, which it usually has, count on drilling new holes or having us fabricate a small backing plate. We are an independent gate service company, not affiliated with Mighty Mule, but we install both OEM Mighty Mule parts and proven aftermarket equivalents that fit the same mounting points and wiring. For most Burleson homeowners, a quality aftermarket keypad costs less and lasts just as long as the OEM unit, but we present both options with honest pricing before any work starts.

Signs Your Mighty Mule Keypad & Intercom Repair Is Failing

• Keypad won’t beep or light up when pressed. This usually means the keypad isn’t receiving power from the control board, or the keypad’s internal circuit has finally corroded through. If there’s a cluster of dead buttons but the rest work, the contacts under those keys are worn out.
• Correct code gets no response on the first try. Intermittent entry code failures often come from oxidation on the circuit board or moisture intrusion into the keypad housing, not a programming fault. Mighty Mule keypads are weather-resistant, but they aren’t weatherproof, and a southeast-facing fence in Burleson bakes in full sun for six months straight.
• Intercom buzzes or pops instead of carrying voices. A failed capacitor on the intercom board or a corroded wire splice near the fence line is the usual culprit. The gate still opens, but the communication side has gone. We can often replace just the intercom module instead of the whole system.
• Buttons stick or the rubber membrane has collapsed. UV damage breaks down the keypad membrane faster than anything else, especially on unshaded gates in Burleson. When the rubber loses its snap back, it needs a new keypad, not a cleaning.
• Water drips from behind the keypad after rain. That’s the failure you can see. Once water gets past the gasket, it shorts the keypad internally and the unit becomes unreliable. The fix is a new sealed keypad and fresh silicone around the mounting base.

Replacement Cost & What’s Included

For Burleson homes, here’s what we typically see:

• Keypad replacement only: $140 to $210 installed. That’s parts, labor, wiring checks, and programming your code.
• Intercom module replacement only: $160 to $250 installed, including wire splice repair where needed.
• Keypad plus intercom together: $240 to $320 installed. We do both at once if the failures are related, which they often are after a water intrusion event.
• Diagnostic call: $89, applied toward the repair if you proceed.

The price is quoted and agreed before any work starts. You won’t get an invoice that exceeds what we told you over the phone or at the gate. Every keypad and intercom repair is covered by our 90-Day Done Right Promise, in writing: if it is not right, we come back and make it right, every time, on every job. Most Mighty Mule keypad and intercom repairs are completed in a single visit, and we’ll test the gate cycle several times before we leave the driveway.

DIY or Call Us?

There are two things an owner can safely check before calling. First, confirm the gate opener itself has power and works from the remote. If the gate operates fine from the remote but not the keypad, the problem is localized to the keypad or its wiring. Second, look at the keypad housing for visible cracks, missing caulk, or water inside the lens. If you find water, leave the power alone and call us. Mighty Mule keypads and intercoms run on low-voltage DC power, so the shock risk is minimal, but the bigger hazard is making a wiring mistake at the control board that fries the opener’s brain. That turns a $180 keypad repair into a $900 board replacement. If the keypad is dead, cracked, or waterlogged, call us at (469) 564-8046 and describe what’s happening. As Victor Salinas puts it, “Tell me what it is doing, and I will tell you what it needs – no guesswork, no runaround.”

FAQs