Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDoorKing Gate Access Control in Burleson: What to Know First
DoorKing gate access control repair in Burleson typically runs $180 to $650 depending on whether we’re replacing a keypad, rewiring a phone entry board, or retrofitting an older 1812 system. Most DoorKing jobs are completed in a single visit, and every price is quoted and agreed before a single bolt is turned. If your DoorKing keypad, card reader, or intercom is acting up, call (469) 564-8046 and a live person answers, day or night.
This page is for Burleson homeowners who own a DoorKing system and want someone who actually knows how these units behave after ten or fifteen years in Texas weather. We’re an independent DoorKing service provider, not a factory authorized shop, which means we stock parts that dealers take two weeks to order and we fix problems based on what we see in the field, not what a phone-tech script tells us to try.
How DoorKing Products Fail - and How We Fix Them
- 1812 and 1814 intercom boards losing memory. These two models are the workhorses of older Burleson properties, and we see the same failure constantly: the system forgets entry codes after a power flicker. The culprit is usually the onboard lithium battery, which lives on the main control board and dies quietly after five to seven years. We replace the battery, reflash the codes, and test the memory under a simulated power interruption before we leave.
- DoorKing 1601 keypads with dead 8 and 0 keys. The 1601 series used membrane keypads that break down in direct Texas sun. The 8 and 0 keys fail first because they sit at the numeric center of most four-digit codes and get pressed hardest. A full keypad replacement takes under an hour, and we use a UV-stabilized replacement rather than the OEM membrane that will simply crack again in three summers.
- MicroPLUS and MicroCLICK receivers not carrying a signal to the opener. When a DoorKing remote works only from ten feet away, owners assume the remote battery is dying. Often the real problem is the antenna wire on the receiver control board, which corrodes at the connection point from humidity and age. We strip, re-solder, or replace that antenna lead in about thirty minutes.
- Telephone entry systems with static on the line or no dial-out. DoorKing 1833 and 1835 telephone entry panels are common at Burleson homes with older long driveways. Failure usually traces to the surge protector on the phone input, which takes a hit during spring lightning and silently stops the panel from calling your house line. We bypass-test, then install a hardened surge module so the next storm doesn’t do it again.
- Access control boards that work in the winter and die in the summer. Burleson heat is a real factor here. DoorKing boards mounted inside metal enclosures can run hot enough to trip a thermal lockout in July and August, especially on west-facing gates. Adding a small vented standoff or a shaded enclosure redirect keeps a 20-year-old board running instead of replacing it for $700.
Our DoorKing Gate Access Control Process
- 1
We start by listening. You describe the symptom, and we ask the questions that matter: When did it start? After a storm? After a code change? After a power blink? Victor Salinas will tell you himself: tell me what it is doing, and I will tell you what it needs, no guesswork, no runaround.
- 2
We test the full path. Keypad, receiver, board, relay, power supply. DoorKing systems fail in layers, and fixing the obvious layer without checking the ones behind it is how you end up with a second service call.
- 3
We decide on parts honestly. Some repairs need genuine DoorKing components, especially control boards with firmware that aftermarket parts can’t match. But simple wear items, like keypad membranes and antenna leads, are often better sourced as quality aftermarket parts designed for Texas sun exposure. We’ll tell you which is which and let you decide with real numbers in front of you.
- 4
We make the repair and test everything. Every code is entered. Every remote is pressed from the driveway. The gate is cycled open and shut at least ten times. We induce a power interruption to confirm memory holds.
- 5
We clean up and walk you through it. You’ll see your new code entered, your remotes working, and the bill matching the quote we gave before the work began.
What DoorKing Gate Access Control Costs in Burleson
Here’s what we see in Burleson, based on the work we’ve done on DoorKing systems across Johnson County:
- Keypad replacement (1601 series): $180 to $280 installed.
- Control board repair or replacement: $320 to $650 depending on model and whether we can salvage the existing board.
- Receiver or antenna lead repair: $140 to $220.
- Telephone entry panel repair (1833/1835): $240 to $400 with surge protection included.
- Full access control retrofit from an aging 1812 to a modern keypad-plus-receiver setup: $900 to $1,800 depending on gate type and wiring condition.
What moves the price is parts: genuine DoorKing control boards cost more than a keypad membrane, and that’s the honest truth. You’ll always get the quote before work starts, in writing, and it does not change unless we find something structural that we call you about first. Call (469) 564-8046 for a free estimate on your specific system.
Why Burleson Homeowners Call Ironworks Gate Co. for DoorKing Work
We’ve been serving Burleson for over 42 years, and we’ve seen plenty of DoorKing units that should have been retired a decade ago still running because someone wired them correctly and kept the boards clean. That’s the kind of work we do. Every technician who touches a DoorKing system in Burleson is background-checked, uniformed, and trained on eight other gate automation brands besides DoorKing, including LiftMaster, Mighty Mule, and Ghost Controls. That matters when a DoorKing owner is also running a LiftMaster opener on a different gate, or when a repair on one brand exposes a weak spot in another. Our work is backed by the 90-Day Done Right Promise, in writing, on every job. No paperwork, no arguing, no exceptions.
FAQs
If your DoorKing system is still under factory warranty, we’ll tell you before touching anything and work with you on whether a dealer service call makes more sense. For systems out of warranty, which is most of what we see in Burleson, you’re clear to use an independent service provider, and our 90-Day Done Right Promise protects the work either way. Call (469) 564-8046 and we’ll help you sort it out.
Usually, yes. We keep common DoorKing failure parts on our trucks, including keypad membranes, batteries, antenna leads, and surge modules for telephone entry boards. When a part has to be ordered, we can typically have it in hand within a few days. Call (469) 564-8046 and we’ll check stock for your model while you’re on the phone.
We repair first, and we’ll only recommend replacement when the board is dead and the cost of a new one is within 40 percent of a modern retrofit. Most DoorKing units in Burleson are serviceable for years with a good board cleaning and the right replacement parts. Ask us to look at your unit and we’ll give you the straight answer.
A live person answers the phone 24 hours a day, 7 days a week, and we schedule most DoorKing repairs in Burleson within one to two days. Emergency access failures, like a gate that won’t open at all, get priority whenever we have a truck in the area. Call (469) 564-8046 and we’ll give you a real arrival window, not a four-hour range.
A full retrofit includes a new access control package matched to your gate type, labor to remove the old unit, wiring cleanup, and complete testing of every access point. You get a written quote before we start, no surprises on the bill, and the entire job is covered by our 90-Day Done Right Promise. Call (469) 564-8046 for a free measure and estimate.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Burleson and nearby areas.