Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Parts & Welding in Burleson: What to Know First
Ghost Controls gate parts and welding in Burleson typically cost between $180 and $650, and most repair jobs are completed in a single visit. We’re an independent Ghost Controls service provider, not a company affiliated with or authorized by Ghost Controls, which means we can weld a broken hinge, source the right part, and get your gate moving again without sending you through a manufacturer phone tree. If you own a Ghost Controls opener and the gate itself has failed, welded components have cracked, or hardware has worn out, this page tells you exactly what to expect. Call (469) 564-8046 and a live person answers, day or night.
Why Burleson Homeowners Call Ironworks Gate Co. for Ghost Controls Work
Most of the Ghost Controls gates we service in Burleson belong to people who have lived in their homes for twenty years or more. They installed the opener themselves or had it done years ago, and it has worked well enough until the gate itself started sagging, dragging, or refusing to latch. We have been serving Burleson and the surrounding communities since 1984, and by now we know which Ghost Controls systems hold up and which ones need a little help from a welder. Every job we complete is covered by our 90-Day Done Right Promise, a written guarantee with no paperwork and no arguing: if it is not right, we come back and make it right. Our technicians are background-checked and uniformed, and they treat your driveway the way they would treat their own mother’s. And because we service nine gate-automation brands including LiftMaster, Mighty Mule, and DoorKing, we can help you even if your home has more than one opener platform or you decide to switch brands down the road.
How Ghost Controls Products Fail - and How We Fix Them
Ghost Controls makes a reliable opener for the price, but the gate hardware around it takes a beating in Johnson County heat and clay soil. These are the failures we see most often, and how we handle each one:
- Hinge weld fatigue on the V-Series and Original series. Ghost Controls kits are popular on tube-steel farm and ranch gates, and those gates are heavy. The hinge barrels weld to the post fine at first, but years of opening and closing stress the weld at the exact point where the barrel meets the post. We grind out the old weld, true up the gate, and re-weld with a full-penetration pass that holds.
- Sagging gate dragging the ground on heavier swings. The symptom is a gate that suddenly trips the opener’s obstruction sensor or stops halfway. Homeowners think the motor is failing. In most cases, the motor is fine, but the frame has sagged so the leaf drags or the hinge side is out of square. We cut out the fatigued section or re-hang the leaf with new barrel hinges, then set the travel limits again.
- Post movement in Burleson clay soil. North Texas clay expands when wet and shrinks when dry, which slowly works the post loose. A gate that closed perfectly in May starts missing the latch plate in August. We dig, set the post in concrete, and often weld in a diagonal brace so the post cannot lean again.
- Broken rail welds where the gate meets the rack on slider models. Ghost Controls slider kits use a rack bolted to the gate rail. When the bolts work loose, the rack flexes and the gate jerks and chatters as it moves. We weld or bolt the rack straight, then run the opener through a full cycle to confirm the gear mesh is clean.
- Latch and lock misalignment from a bent frame corner. After a wind gust or a car bump, the gate leaf twists just enough that the Ghost Controls latch no longer catches the receiver. We readjust the frame, reinforce the corner with a gusset weld where it needs it, and set the latch so it closes with one clean click.
Our Ghost Controls Gate Parts & Welding Process
- 1
You call. A live person answers the phone, not a voicemail or an answering service. We listen, and we tell you honestly whether the problem sounds like weld work, a part replacement, or something else.
- 2
We come out and diagnose. Before any work is quoted, our technician puts eyes on the gate, the posts, the hinges or rollers, and the opener. No guesswork, no runaround.
- 3
We give you a written price. The price is agreed before a single bolt is turned. If we need OEM Ghost Controls parts, we quote them. If a quality aftermarket part is the better value and will not threaten your warranty, we tell you that too.
- 4
We do the work. Welding, hinge or roller replacement, latch work, rail repair. Most Ghost Controls parts and welding jobs are finished in that first visit.
- 5
We test the full cycle. The gate moves, the opener responds, the safety edges, travel limits, and auto close all work before we call the job done.
- 6
You get the 90-Day Done Right Promise in writing. If something is not right, we come back and make it right, no paperwork, no arguing.
What Ghost Controls Gate Parts & Welding Costs in Burleson
Here are the price ranges we typically see on Ghost Controls gate parts and welding work in Burleson. Every job gets an exact quote before work starts, but these numbers give you a straight answer:
- Hinge replacement (single gate, welded barrel hinges): $220-$420
- Post replacement with concrete set: $320-$550
- Rail repair and rack re-securing (slide gates): $180-$340
- Custom welding, crack repair, or frame reinforcement: $150-$400 depending on size and accessibility
- Gate roller replacement (slide gates): $160-$310
The biggest factors that move the price are gate weight, whether we need to dig and reset a post, and whether the frame is too far gone to weld and needs a section replaced. You will know the exact cost before we start. Estimates are free, and we offer a Free Second Opinion on any written estimate from another company.
FAQs
The Ghost Controls opener warranty covers the motor, control board, and remotes, and welding on the gate structure or hinges does not touch those components. As an independent Ghost Controls service provider, we always weld or repair the gate itself without modifying the opener electronics, so your manufacturer coverage on the operator stays intact. Call (469) 564-8046 and we will walk you through what is covered before we touch anything.
We can source OEM Ghost Controls parts for limit switches, remotes, and control boards, and we use quality aftermarket parts for gate hardware like hinges, rollers, and latch assemblies when they match or exceed the original spec. We never install a part that we would not put on our own driveway. You get the choice and a straight price for each before any work begins.
Most Ghost Controls gate parts and welding jobs in Burleson are scheduled and completed during the first visit, and we keep a range of common Ghost Controls hardware on the truck. For urgent failures where the gate is stuck open or blocking a driveway, we make those calls a priority. Call (469) 564-8046 and we will give you a straight arrival window.
If the steel is sound and the failure is a cracked weld, a torn hinge point, or a sagged frame, welding is almost always the better value, and it keeps the gate you already own working for years longer. We replace the gate only when the steel has rusted through or the frame is too twisted to align. We will show you exactly what we see, and the decision stays yours.
Yes. We service nine gate-automation brands, including LiftMaster, Mighty Mule, and DoorKing, so if you have a Ghost Controls on the driveway and something else on the pasture gate, one call handles both. No need to bring in a second company.
Call Ironworks Gate Co. for Ghost Controls Gate Parts & Welding in Burleson
If your Ghost Controls gate is sagging, dragging, cracking, or refusing to latch, call (469) 564-8046. A live person answers, we give you a straight answer and a written price before any work starts, and we stand behind it with the 90-Day Done Right Promise. We are at our Burleson location and ready when you are. Victor Salinas, Owner, and the whole Ironworks team will be there when we say we will.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Burleson and nearby areas.