Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Kennedale
If your driveway gate stopped moving in Kennedale, the problem usually comes down to two things: the motor gave out, or the gate itself has shifted out of alignment from the clay soil moving beneath it. We repair and install automatic gate openers throughout ZIP 76060, from heavy acreage gates off Bowman Springs Road to ornamental iron gates in the newer subdivisions. Call (469) 564-8046 and a live person answers, day or night. We show up when we say we will, diagnose the issue on the first visit, and quote the price before a single bolt is turned.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Motor & Opener Team
Kennedale is not Arlington. It is not Fort Worth. It is a semi-rural pocket inside the metroplex where driveway gates are heavier, lots are larger, and the soil under every post has a mind of its own. We have spent 42 years working on gates like the ones found here: pipe-frame ranch gates, welded steel swing gates, slide gates on caliche driveways, and automated systems that have to hold up to horses, trailers, and North Texas weather. Homeowners in Kennedale keep calling us because we do not guess. We know what the Blackland Prairie clay does to a hinge post after one wet winter, and we build or repair accordingly.
Every Gate Motor & Opener job we take in Kennedale is backed by our written 90-Day Done Right Promise. If something is not right, we come back and make it right. No arguing, no paperwork, no exceptions. Victor Salinas, our owner, has built the company on that one commitment: stand behind the work like it is your own driveway.
Our Gate Motor & Opener Services in Kennedale
Motor Installation
A new gate motor in Kennedale has to be matched to the gate it is moving, not just bolted on and wired up. Too many acreage gates get fitted with openers rated for half their actual weight, and the motor burns out within two years. We measure the gate, weigh the load, check the post footing depth, and install an opener that will not quit when the gate is heavy and the summer heat is riding on it. For a heavy pipe-frame swing gate on a horse property, that often means a linear or ram-style opener rather than a residential arm unit.
Motor Repair
When a gate motor in Kennedale fails, the motor itself is often the victim, not the culprit. The clay soil heaves, the post tips, the gate drops, and the motor works against a load it was never designed to fight. Our repair work starts with the whole system: post alignment, hinge condition, track height, gear wear, and control board diagnostics. Then we fix what actually failed and correct the underlying cause so you are not calling us again when the next rain-drought cycle rolls through.
Linear Motor Service
Linear openers work well on Kennedale acreage because they handle the long throw and heavy weight of ranch gates, but they are sensitive to post movement. When the hinge post shifts even an inch out of plumb, the linear arm binds and the drive gear strips. We stock linear motor components for the brands most common around Kennedale, including Ghost Controls and Mighty Mule, and we service the full drive assembly, not just the motor housing. That distinction saves Kennedale customers the cost of a second repair six months down the road.
Slide Motor Service
Slide gates are the right answer for many Kennedale properties where a swing gate would eat the whole driveway or block the approach to a barn. But a slide gate on an unpaved caliche driveway has a specific failure pattern: ground-contact dragging, worn rollers, and a rack that shifts out of alignment as the post settles. On a horse property off Bowman Springs Road, our tech replaced a failed LiftMaster slide gate operator whose rack and pinion had sheared after the clay heaved the post footing out of plumb. We rebuilt the footing to 28 inches, re-hung the slide track, and integrated a loop detector so the gate clears the caliche driveway without dragging. The owner now gets years of service instead of a repair every other winter.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We train our technicians on nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule, because Kennedale gates carry every brand ever sold in North Texas. A box-store Mighty Mule on a ranch gate, a commercial-grade DoorKing on a subdivision entrance, an Elite slide operator on a newer estate home: we carry the right parts and service manuals for all of them. That means one visit, the correct fix, and a gate that closes like the day it was hung.
Common Gate Motor & Opener Problems We See in Kennedale Homes
- Clay heave tips the hinge post outward. A heavy swing gate on a post set in a shallow footing will lean after one wet winter, binding the rack and pinion on the slide motor and stripping the drive gear. The fix is the same every time: rebuild the footing below the active clay zone, 24 to 30 inches deep.
- DIY pipe-frame gates drop to drag on the ground. Homeowners often install pipe-frame gates with welded hinges set in shallow concrete to save money. When the clay expands and contracts, the posts tip, the gate drops, the motor overloads, and the control board burns out. This is the most common repeat repair call in ZIP 76060.
- Summer heat kills solar gate opener electronics. Temperatures above 105°F cook the circuit boards and nylon rollers on solar-powered openers, so the gate dead-stops mid-travel. Manual disengagement is needed until the board and rollers are replaced, and Battery Backup protects the system when the grid dips or the panels underperform.
- Power interruptions and surge damage. North Texas storms knock out power to Kennedale several times a year. Without battery backup, a gate motor can lose its limit settings or suffer surge damage to the control board. Intercom Integration and access controls also reset, leaving the gate stuck open or dead.
Pricing for Gate Motor & Opener in Kennedale, TX
A typical gate motor repair in Kennedale runs $250 to $550, depending on whether we are replacing a drive gear, a control board, a limit switch, or a full operator. Full motor installation, including the opener, mounting hardware, wiring, and safety edges, typically runs $1,600 to $3,800, with heavier acreage slide gates at the upper end. Linear motor replacements run $700 to $1,800, and slide motor work on long caliche driveway gates runs $900 to $2,400. Battery Backup additions run $450 to $1,000. The price is quoted and agreed before any work starts, so the bill matches the estimate. Call (469) 564-8046 for a free estimate; $50 Off Any Repair Over $250 is always on the table.
We Also Serve Cities Near Kennedale
Our Gate Motor & Opener in Kennedale service area extends to Arlington, Mansfield, Fort Worth, and Burleson. If you are on the edge of Kennedale toward one of those cities, call us and we will confirm dispatch coverage for your address. The same crews, the same written guarantee, the same 24-hour live phone.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Kennedale
Because the Blackland Prairie clay under ZIP 76060 expands when wet and shrinks when dry, shifting your gate posts out of plumb. The gate drops, the hinges bind, and the motor strains against a load it was not built to handle. The permanent fix is rebuilding the post footings below the active clay zone, typically 24 to 30 inches deep, then re-hanging the gate so it swings or slides true. Call (469) 564-8046 and we will inspect your footings and tell you exactly what it will take to stop the seasonal cycle.
Yes, and this is one of the most common slide motor jobs we do in Kennedale. The key is setting the track height above the high point of the caliche, using a V-track or cantilever wheel system that tolerates uneven ground, and anchoring the motor pad independently of the gate track. We install loop detectors and set the travel limits so the gate never drags. For a free measure and written quote, call (469) 564-8046.
Add a Battery Backup system. It keeps the opener, safety eyes, intercom, and access control powered when the grid drops, so the gate still opens for you and emergency vehicles. In Kennedale, where storm outages hit several times a year, a battery backup is the single best investment you can make in a gate motor after the opener itself. Standby units run $450 to $1,000 installed, and the estimate is free.
UL 325 requires every automatic gate opener to have at least one monitored entrapment protection device, such as photo eyes or an edge sensor, plus an audible alarm that sounds if the gate contacts an obstruction twice in a row. These rules exist to prevent serious injury, and every installation we do in Kennedale includes the required safety devices and testing. If your gate was installed before the current rules, or if your opener lacks sensors, call us at (469) 564-8046 and we will bring it up to code during a normal service visit.
Usually it is a sensor or obstruction issue, not the motor. When a slide gate stops midway and beeps, the opener has detected resistance or a safety edge has been tripped. On Kennedale caliche driveways, the most common cause is the gate dragging on a high spot or debris lodged in the track. If the load is within spec and the track is clear, the fault may be in the limit switch or a failing capacitor. Call (469) 564-8046 and a live person will schedule a Kennedale technician to check it.
Call Ironworks Gate Co. for Gate Motor & Opener in Kennedale
When your gate motor fails in Kennedale, you want the company that knows exactly why it failed and how to keep it from failing again. Ironworks Gate Co. does the work right, writes the guarantee down, and answers the phone around the clock. Call (469) 564-8046 for a free estimate on any gate motor or opener repair, installation, or Battery Backup upgrade in ZIP 76060. We will be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale homeowners through the Dallas-Fort Worth office.